☒ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
For the fiscal year ended December 25, 2021
Or
☐TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
For the transition period from to
Commission file number: 000-50307
FormFactor, Inc.
(Exact name of registrant as specified in its charter)
Delaware
13-3711155
(State or other jurisdiction of
incorporation or organization)
(I.R.S. Employer
Identification No.)
7005 Southfront Road, Livermore, California
94551
(Address of principal executive offices)
(Zip Code)
(925) 290-4000
(Registrant's telephone number, including area code)
Securities registered pursuant to Section 12(b) of the Act:
Title of each class
Trading Symbol(s)
Name of each exchange on which registered
Common stock, $0.001 par value
FORM
Nasdaq Global Market
Securities registered pursuant to Section 12(g) of the Act:
None
Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ☐No☒
Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes ☐No☒
Indicate by check mark whether the registrant: (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes☒ No ☐
Indicate by check mark whether the registrant submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of the Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yes☒ No ☐
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company” and “emerging growth company” in Rule 12b-2 of the Exchange Act:
Large accelerated filer
☒
Accelerated filer ☐
Non-accelerated filer ☐
Smaller reporting company
☐
Emerging growth company
☐
If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐
Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepares or issued its audit report. ☒
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes ☐ No ☒
Aggregate market value of registrant's common stock held by non-affiliates of the registrant, based upon the closing price of a share of the registrant's common stock on June 25, 2021 (the last business day of the registrant's most recently completed second quarter) as reported by Nasdaq Global Market on that date: $1,800.1 million.
The number of shares of the registrant's common stock, par value $0.001 per share, outstanding as of February 14, 2022 was 78,333,760 shares.
DOCUMENTS INCORPORATED BY REFERENCE
Portions of the registrant's definitive Proxy Statement for the 2022 Annual Meeting of Stockholders, which will be filed within 120 days of the end of the registrant's fiscal year ended December 25, 2021, are incorporated by reference in Part III hereof. Except with respect to information specifically incorporated by reference in this Annual Report on Form 10-K, the Proxy Statement is not deemed to be filed as a part of this Annual Report on Form 10-K.
FORMFACTOR, INC.
Form 10-K for the Fiscal Year Ended December 25, 2021
Throughout this Annual Report on Form 10-K, we refer to FormFactor, Inc. and its consolidated subsidiaries as “the Company,” “FormFactor,” “we,” “us,” and “our.” Our fiscal year ends on the last Saturday in December. Our last three fiscal years ended on December 25, 2021, December 26, 2020 and December 28, 2019.
2
NOTE REGARDING FORWARD-LOOKING STATEMENTS
This Annual Report on Form 10-K contains forward-looking statements within the meaning of the Securities Exchange Act of 1934 and the Securities Act of 1933, which are subject to known and unknown risks and uncertainties. The forward-looking statements include statements concerning, among other things, our business strategy (including the influence of anticipated trends and developments in our business and the markets in which we operate), financial results, operating results, revenues, gross margin, liquidity, operating expenses, products, projected costs and capital expenditures, research and development programs, sales and marketing initiatives, competition and impact of accounting standards. In some cases, you can identify these statements by our use of forward-looking words, such as “may,” “might,” “will,” “could,” “should,” “expect,” “plan,” “anticipate,” “believe,” “estimate,” “predict,” “intend” and “continue,” the negative or plural of these words and other comparable terminology. Forward-looking statements are based on information available to us as of the filing date of this Annual Report on Form 10-K and our current expectations about future events, which are inherently subject to change and involve known and unknown risks and uncertainties. You should not place undue reliance on these forward-looking statements. We have no obligation to update any of these statements, and we assume no obligation to do so. Actual events or results may differ materially from those expressed or implied by these statements due to various factors, including but not limited to the matters discussed below in the section entitled “Item 1A: Risk Factors,” and elsewhere in this Annual Report on Form 10-K.
Our operating results have fluctuated in the past and are likely to continue to fluctuate. You should not rely on period-to-period comparisons of our financial results as indicators of our future performance. Some of the important factors that could cause our revenues, operating results and outlook to fluctuate from period to period include:
◦customer demand for and adoption of our products;
◦market and competitive conditions in our industry, the semiconductor industry and the economy as a whole;
◦the timing and success of new technologies and product introductions by our competitors and by us;
◦our ability to work efficiently with our customers on their qualification of our new technologies and products;
◦our ability to deliver reliable, cost-effective products that meet our customers’ testing requirements in a timely manner;
◦our ability to transition to new product architectures to solve next-generation semiconductor test and measurement challenges, and to bring new products into volume production on time and at acceptable yields and cost;
◦our ability to implement measures for enabling efficiencies and supporting growth in our design, applications, manufacturing and other operational activities;
◦the reduction, rescheduling or cancellation of orders by our customers;
◦our ability to collect accounts receivables owed by our customers;
◦our product and customer sales mix and geographical sales mix;
◦reductions in the prices or the profitability of our products due to competitive pressures or other factors;
◦the timely availability or the cost of labor, components and materials utilized in our products;
◦our ability to efficiently optimize manufacturing capacity and production yields as necessary to meet customer demand and ramp variable production volumes at our manufacturing facilities;
◦our ability to protect our intellectual property against infringement and continue our investment in research and development and design activities;
◦the timing of and return on our investments in research and development;
◦any disruption in the operation of our manufacturing facilities;
◦risks to the Company’s realization of benefits from acquisitions and investments in capacity and data systems;
◦changes in trade, tariff or export regulations in the markets where we produce or sell our products; and
◦factors impacting political and global economic stability, including natural disasters, pandemics (such as the current COVID-19, or coronavirus pandemic), military conflicts, climate change, and other factors acting alone or in combination.
3
PART I
Item 1: Business
General
FormFactor, Inc., headquartered in Livermore, California, is a leading provider of essential test and measurement technologies along the full semiconductor product lifecycle - from characterization, modeling, reliability, and design de-bug, to qualification and production test. We provide a broad range of high-performance probe cards, analytical probes, probe stations, metrology systems, thermal systems, and cryogenic systems to both semiconductor companies and scientific institutions. Our products provide electrical and physical information from a variety of semiconductor and electro-optical devices and integrated circuits from early research, through development, to high-volume production. Customers use our products and services to accelerate profitability by optimizing device performance and advancing yield knowledge.
FormFactor, Inc., was incorporated in 1993, and we introduced our first product in 1995. In October 2012, we acquired Astria Semiconductor Holdings, Inc., including its subsidiary Micro-Probe Incorporated (together “MicroProbe”); in June 2016, we acquired Cascade Microtech, Inc. (“Cascade Microtech” or “CMI”); in October 2019, we acquired FRT GmbH (“FRT”); in July 2020, we acquired the probe card assets of Advantest Corporation (“Baldwin Park”); and in October 2020, we acquired High Precision Devices, Inc. (“HPD”). These acquisitions have helped transform our business into a semiconductor test and measurement market leader with greater scale, diversification, breadth and market opportunities.
As of December 25, 2021, we operate in two reportable segments consisting of the Probe Cards segment and the Systems segment. Sales of our probe cards and analytical probes are included in the Probe Cards segment, while sales of our probe stations, metrology systems, thermal systems and cryogenic systems are included in the Systems segment.
Products
We design, manufacture and sell multiple product lines, including probe cards, analytical probes, probe stations, metrology systems, thermal systems, and cryogenic systems, and related services.
Probe Cards. Our probe cards utilize a variety of technologies and product architectures, including micro-electromechanical systems (MEMS) technologies. We use advanced design and automation technologies to enable rapid and cost-effective manufacturing of resilient composite contact elements with characteristic length scales of a few microns. These contact elements are designed to provide a specific range of forces on, and across, a chip’s bond pad, solder bump, micro-bump, through-silicon-via (TSV), or copper pillar, during the test process and maintain their shape and position over a range of compression levels. In addition, while maintaining these mechanical characteristics, the contact elements must achieve reliable and high-fidelity electrical contact through wafer surfaces that are generally oxidized or otherwise contaminated, and must maintain these attributes over hundreds of thousands, and even millions, of compression cycles. Our range of capabilities enable us to rapidly produce customer-design specific probe cards that deliver leading precision, quality, reliability, and electro-mechanical performance.
Our probe cards are customized for our customers’ unique wafer and chip designs by modifying and adapting our standard product architectures to meet an individual customer’s specific wafer and chip design layouts and electrical test requirements. We offer probe cards to test a variety of semiconductor device types, including systems on a chip (SoC), mobile application processors, microprocessors, microcontrollers, graphic processors, radio frequency, analog, mixed signal, image sensors, electro-optical, DRAM memory, NAND flash memory and NOR flash memory devices.
For many advanced applications, our products must maintain tens of thousands of simultaneous high-fidelity low-impedance electrical contacts with the corresponding chip contacts on the wafer. Our present technologies enable probe cards with over 100,000 contact elements with spacings as small as 40 microns over geometries as large as an entire 300mm wafer. In addition, for high signal-fidelity devices such as wireless radio frequency transceivers and automotive radar chips, our probe card technologies are capable of testing at millimeter-wave frequencies range, currently up to 81 GHz.
We have invested, and intend to continue to invest, considerable resources in proprietary probe card design tools and processes. These tools and processes are intended to enable the rapid and accurate customization of products required to meet customer requirements, including automated routing and trace length adjustment within our probe cards, to rapidly design complex structures.
In addition, some of our customers test certain chips over a large range of operating temperatures, such as for automotive applications. We design probe cards to provide for a precise match with the thermal expansion characteristics of the wafer under test across the range of test operating temperatures. For many of our products, our customers can use the same probe card
4
for both low and high temperature testing. We also design probe cards for customers that require extreme positional accuracy at a specific temperature.
Through ongoing investments in both our technology and operations, we continue to innovate and improve so that our products will meet customers’ future technical roadmap performance, quality, and commercial requirements. We also focus upon leveraging these ongoing investments across all advanced probe card markets to realize synergies and economies of scale to benefit our competitiveness, time-to-market and overall profitability.
Analytical Probes. We offer over 50 different analytical probe models for engineering and production testing. Analytical probes are used for a diverse set of applications, including device characterization, electrical simulation model development, failure analysis, and prototype design debugging. Our customers for analytical probes include universities, research institutions, semiconductor integrated device manufacturers, semiconductor foundries, and fabless semiconductor companies. We continue to add new models of analytical probes that address measurements with higher complexities and at higher frequencies.
Probe Stations. Probe stations, also referred to as probe systems, are a critical tool for the development of new generations of semiconductor and electro-optical processes and designs. Probe stations are highly configurable for the required measurements, the size and type of wafer under test, the characteristics of the device design to be tested, and the temperatures at which testing is to be performed. Process development and design complexities have continually increased with each new generation of semiconductor technology to accommodate smaller design geometries, complex 3-D architectures, new materials and more layers. Probe systems are a fundamental tool for characterizing and verifying electrical performance and reliability to enable new semiconductor technologies. We design our probe systems for semiconductor design engineers to capture and analyze more accurate data in a shorter amount of time and to be able to control and manage testing at temperatures from near absolute zero to hundreds of degrees centigrade.
We build upon our probe stations to create integrated measurement systems that provide complete solutions for our customers’ complex measurement requirements. These systems include test instrumentation, probe, cabling configurations, and software to enable fast, accurate, on-wafer data collection for complex application and measurement needs. We offer pre-configured and customized measurement systems for production testing, power device characterization, vacuum probing, cryogenic probing, high-pressure probing, photonics testing, and a variety of other specific applications.
Metrology Systems. We offer surface metrology systems for various applications including the development, production and quality control of semiconductor products. With resolution down to nanometer scales, these systems measure topography, structure, step height, roughness, wear, thickness variation, film thickness and other parameters. The modular architecture of the systems allows for the sensor configuration to be customized for the application while leveraging a common platform. These systems integrate hybrid metrology capabilities and proprietary software to enable non-destructive and rapid measurement of multiple features and parameters simultaneously, which has multiple applications but is particularly useful in the growing space of advanced packaging and MEMS applications.
Thermal Subsystems. Our thermal subsystems include thermal chucks and other test systems used in probe stations and other applications where precise temperature management is required. Thermal chuck systems enable the testing of devices at precise temperatures or across a range of temperatures. These systems are both marketed externally and allow for vertical integration with our probe stations.
Cryogenic Systems. Our cryogenic systems include the manufacture of precision cryogenic instruments and semiconductor test and measurement systems. These include advanced cryogenic probe systems to test wafer or singulated die, as well as Adiabatic Demagnetization Refrigerator (ADR) cryostats used in various applications at close to absolute zero degree temperature, including quantum and superconducting computing applications, astronomy, and other situations where cryogenic temperature management is required. These systems are marketed externally and also allow for vertical integration with our existing cryogenic wafer and chip probe stations and cryogenic engineering probes.
Services and Support. In addition to routine installation services at the time of sale, we offer services to enable our customers to maintain and more effectively utilize our products and to enhance our customer relationships. In addition to traditional maintenance services, our applications engineers assist our customers in test methodologies to make advanced measurements during process and product development, and during mass production.
Customers
Our customers include companies, universities and institutions that design or make semiconductor, and semiconductor related products in the Foundry & Logic, DRAM, Flash, Display and Sensor markets. Our customers use our products to test nearly all semiconductor device types, including SoCs, mobile application processors, microprocessors, quantum processors,
5
microcontrollers, graphic processors, radio frequency, analog, mixed signal, image sensors, electro-optical, DRAM memory, NAND flash memory and NOR flash memory devices.
Fabless semiconductor suppliers do not manufacture their own semiconductors, but they purchase our analytical probes, probe stations, and other System products for research and development, and device characterization. They also purchase, or direct their foundries or wafer test facilities to purchase, our probe cards to test wafers manufactured for them.
We believe our customers consider timely service and support to be an important aspect of our relationship as our products are critical elements of high-volume manufacturing and design-specific product ramps. Our probe stations and metrology systems are installed at customer sites either by us, our manufacturers’ representatives or our distributors, depending on the complexity of the installation and the customer’s geographic location. We assist our customers in the selection, integration and use of our products through application engineering support. We also provide worldwide on-site probe card maintenance and service training, seminars and telephone support. In certain geographic regions, and for selected products, our manufacturers’ representatives and distributors provide additional service and support.
Information concerning revenue by geographic region and by country based upon ship-to location appears under Item 7: Management's Discussion and Analysis of Financial Condition and Results of Operations - Revenues - Revenues by Geographic Region and Note 16 of the Notes to Consolidated Financial Statements included in Part II, Item 8 of this Annual Report on Form 10-K.
Information concerning revenue concentration by customer appears under Note 2 of the Notes to Consolidated Financial Statements included in Part II, Item 8 of this Annual Report on Form 10-K. The following customers represent 10% or more of our quarterly revenues:
Fiscal Quarters Ended
Dec. 25, 2021
Sep. 25, 2021
June 26, 2021
Mar. 27, 2021
Dec. 26, 2020
Sep. 26, 2020
June 27, 2020
Mar. 28, 2020
Intel Corporation
16.7
%
20.8
%
16.3
%
28.1
%
29.3
%
25.6
%
36.1
%
36.2
%
Samsung Electronics Co., LTD.
13.8
%
12.9
%
14.7
%
*
12.5
%
10.6
%
*
*
Taiwan Semiconductor Manufacturing Co., LTD.
*
*
11.0
%
11.5
%
*
10.6
%
*
*
Micron Technology, Inc.
*
*
*
*
*
10.1
%
*
*
30.5
%
33.7
%
42.0
%
39.6
%
41.8
%
56.9
%
36.1
%
36.2
%
* Less than 10% of revenues.
Segment and Enterprise-Wide Disclosures
See Note 16 of the Notes to Consolidated Financial Statements included in Part II, Item 8 of this Annual Report on Form 10-K for certain financial information related to our segments and our enterprise-wide disclosures.
Manufacturing
Our probe cards are designed for each of our customers' unique designs, by modifying and adapting our product architectures to meet an individual customer’s chip layout and test requirements. Our proprietary manufacturing processes for our probe cards include a complex interconnection system-level design process; a front-end process, which may include wire bonding, photolithography, plating and metallurgical processes, dry and electro-deposition, pick and place assembly; and a back-end process, which includes general assembly and test. Critical steps in our manufacturing process are performed in a variety of clean room environments as stringent as a Class 100, depending on the requirements of the specific manufacturing processes.
Our probe stations and metrology systems are designed to provide highly accurate electrical and optical measurements enabled by precise and reliable mechanical components and assemblies. We prototype and perform robust testing of our product designs and components to ensure high electrical signal integrity, mechanical accuracy and safety. We also monitor our product quality throughout the various stages of our manufacturing processes using a variety of process control methods and tests.
We depend on suppliers for materials and some critical components of our manufacturing processes, including ceramic and organic substrates and complex printed circuit boards. We also rely on suppliers to provide certain contact elements and interconnects that are incorporated into our products. Some of these components and materials are supplied by a single vendor, and some are subject to certain minimum order quantities. Generally, we rely on purchase orders rather than long-term contracts with our suppliers, which subjects us to risks, including price increases, manufacturing capacity constraints and component shortages. We regularly assess and evaluate alternative sources of supply for all components and materials.
6
Our primary manufacturing facilities are located in Livermore, San Jose, Carlsbad, and Baldwin Park, California, Beaverton, Oregon, Boulder, Colorado, United States; and in Thiendorf, Germany. We also perform manufacturing operations in our facilities in Munich and Bergisch Gladbach, Germany; Suzhou, China; and Yokohama, Japan.
We maintain repair and service capabilities in Livermore, San Jose, and Carlsbad, California and Beaverton, Oregon, United States; Thiendorf, Dresden and Munich, Germany; Bundang, South Korea; Yokohama and Hiroshima, Japan; Suzhou and Shanghai, China; Hsinchu, Taiwan; and Singapore.
Research, Development and Engineering
The semiconductor industry is subject to rapid technological change with a continuous stream of new product introductions and technology enhancements. We believe that our continued commitment to research and development and our timely introduction of new and enhanced products and technologies are integral to maintaining and enhancing our competitive position. We allocate significant resources to these efforts and prioritize those resources to prepare for our customers’ next generation electrical test and measurement challenges. We also increasingly seek to deploy our resources to solve fundamental challenges that are both common to, and provide competitive advantage across, our probe card and system product offerings and roadmaps.
Sales and Marketing
We sell our products worldwide through a global direct sales force and through a combination of manufacturers’ representatives and distributors.
Our direct sales and marketing staff is located in the United States, China, France, Germany, Italy, United Kingdom, Japan, Singapore, South Korea, and Taiwan. They work closely with customers in the effort to understand their businesses, anticipate trends and define products that will provide significant technical and economic advantages to our customers. We employ a highly skilled team of application and customer support engineers that support our customers as they integrate our products into their research, development and manufacturing processes. Through these customer relationships, we seek to develop a strong understanding of customer and product requirements to align our capabilities with our customers’ roadmaps and production ramps.
We also have a network of representatives and distributors across the globe to broaden our reach. We engage sales representatives to act as independent third parties that agree to promote our products, at our prices and on terms set by us, in return for a commission based on sales. We typically use sales representatives in areas that we believe require greater levels of customer support than we can deliver from our own sales offices and where local language capabilities can offer an advantage. Our distributors purchase our products and resell them at prices and upon terms set by the particular distributor. We typically use distributors in particular geographies due to local regulations or business customs.
Governmental Regulations
We are subject to international, federal, state and local regulations that are customary to businesses in our industry. These regulations relate to, among other things, environmental matters, anti-corruption, marketing, fraud and abuse, export control, employment, and privacy.
Environmental Matters
We are subject to U.S. federal, state, local, and foreign governmental laws and regulations relating to the protection of the environment, including those governing the discharge of pollutants into the air and water, the management and disposal of hazardous substances and wastes, the clean-up of contaminated sites and the maintenance of a safe workplace. We believe that we comply in all material respects with the environmental laws and regulations that apply to us as of December 25, 2021. We did not receive any notices of violations of environmental laws and regulations in fiscal 2021, 2020 or 2019. In the future, we may receive notices of violations of environmental regulations, or otherwise learn of such violations. Environmental contamination or violations may negatively impact our business.
Import and Export Control
We manufacture, market and sell our products both inside and outside the U.S. Certain products are subject to export control regulations. Failure to comply with these laws could result in sanctions by the U.S. or other respective governments, including substantial monetary penalties, denial of import or export or other privileges and debarment from government contracts.
Competition
The markets for our products are highly competitive and we anticipate that these markets will continually evolve and be subject to rapid technological change. Our current and potential competitors are as below:
7
Probe Cards. The probe card market comprises of many domestic and foreign companies, and has historically been fragmented with many local suppliers servicing individual customers in often differentiated applications. Our primary competitors are AMST Co., Ltd., Chungwa Precision Technology, Feinmetall GmbH, Japan Electronic Materials Corporation, Korea Instrument Co., Ltd., M2N Co., Ltd., Microfriend Inc., Micronics Japan Co., Ltd., MPI Corporation, Micro Square Technology Inc., NHK Spring Co., Ltd., Soulbrain Engineering, Nidec SV TCL, Synergie CAD, TechnoProbe S.p.A, TSE Co., Ltd., WinWay Technology Co., Ltd., WILL-Technology Co., Ltd., and Yokowo, among others.
Probe card vendors such as Japan Electronic Materials Corporation, Micronics Japan Co., and TechnoProbe, offer probe cards built using similar types of MEMS technology as we do. The high capital investment and other costs associated with the development of MEMS probe cards and the time and high cost of the customer evaluation process represent significant barriers to entry for this type of technology.
We believe that the primary competitive factors in the production probe card market depend upon the type of integrated circuit being tested, and include customer service, knowledge of measurement techniques, delivery time, price, probe card lifetime, chip damage prevention, probe tip touch-down accuracy, speed of the probe card, number of chips contacted in parallel, number of probe tips and their layout and pitch, signal integrity, and frequency and effectiveness of any required cleaning. As a result of our relative strengths in these areas, we believe that we compete favorably in the advanced probe card market, and in probe cards for parallel testing of chips with densely-packed bond pads, bumps or pillars, and in high signal integrity testing of wireless radio frequency devices that operate up to millimeter-wave frequencies, a capability needed for components used in 5G applications.
Analytical Probes. Our primary competitor in the analytical probe market is GGB Industries Inc. Regional competitors include Yokowo and TechnoProbe Co., Ltd., in Japan, and MPI Corporation. We believe that the primary competitive factors in this market are breadth of probe types, probe frequency and electrical signal integrity, contact integrity and the related cleaning required, knowledge of measurement techniques, calibration support, delivery time and price. We believe that we compete favorably with respect to these factors.
Probe Stations. Our primary competitors in the probe station market are HiSOL, Inc., LTD/Accretech, The Micromanipulator Company Inc., MPI Corporation, Semiprobe, Signatone Corporation, Tokyo Electron (“TEL”), Tokyo Seimitsu Co., and Wentworth Laboratories Inc. We believe that the primary competitive factors in the probe station market are measurement accuracy and versatility at temperature, including cryogenic temperatures, measurement speed, automation features, knowledge of measurement techniques, completeness of the measurement solutions, delivery time and price. We believe that we compete favorably with respect to these factors.
Metrology Systems. Our primary competitors in the metrology system market are Bruker Corporation, Camtek Ltd., Cohu, Inc., Filmetrics, Onto Innovation, and Unity SC. We believe that the primary competitive factors in this market are breadth of measurement types, measurement accuracy, measurement speed and throughput, ability to apply algorithms to multiple sensor inputs to indirectly measure attributes not otherwise directly observable, knowledge of measurement techniques and applications, delivery time and price. We believe that we compete favorably with respect to these factors.
Thermal Subsystems. In the market for thermal subsystems, we compete principally against ERS Electronic GmbH, Espec Corp, and Temptronic Corporation. In addition, many of our probe station competitors develop and produce their own thermal subsystems for use in their products. We believe the primary competitive factors in this market are thermal performance, reliability, flexibility and completeness of product offerings. We believe that we compete favorably with respect to these factors.
Cryogenic Systems. In the market for cryogenic systems, we compete principally against Bluefors Oy, Entropy, Leiden Cryogenics B.V., Montana Instruments, Nagase Techno-Engineering Co., Oxford Instruments, and STAR Cryoelectronics. We believe the primary competitive factors in this market are cryogenic performance, reliability, throughput and application expertise. We believe we compete favorably with respect to these factors.
Some of our competitors are also suppliers of other types of test and measurement equipment or other semiconductor equipment and may have greater financial and other resources than we do. Our competitors may enhance their current products and may introduce new products that will be competitive with ours. New alternatives to our products may also be introduced, by our current competitors or others, which may reduce the value of one or more of our products.
Semiconductor manufacturers may implement chip designs that include capabilities or use other methodologies that increase test throughput and reduce test content. This may reduce or eliminate some or all of our current products’ advantages. Semiconductor manufacturers may also increase their use of test strategies that include low performance semiconductor testers,
8
less complex probe cards, or test procedures that do not involve our products. Our ability to compete favorably may also adversely be affected by the long-standing relationships between our competitors and certain semiconductor manufacturers.
Intellectual Property
Our success depends in part upon our ability to continue to innovate and invest in research and development to meet the test and measurement requirements of our customers, to maintain and protect our proprietary technology, and to conduct our business without infringing on the proprietary rights of others. We rely on a combination of patents, trade secrets, trademarks and contractual restrictions on disclosure to protect our intellectual property rights. We have filed actions to enforce those rights against third parties in the past, and may pursue such actions in the future.
We have generated, and continue to generate and maintain, patents and other intellectual property rights covering innovations that are intended to create a competitive advantage, and to support the protection of our investments in research and development. We believe that we possess one of the most substantial patent portfolios relevant to our products.
Although we believe that our patents and other intellectual property rights have significant value for each of our segments, we do not believe that maintaining or growing our business is materially dependent on any single patent. Due to the rapid pace of innovation within the markets that we serve, it is possible that our protection through patents may be less important than factors such as our technological expertise, continuing development of new products and technologies, protection of trade secrets, market penetration, customer relationships, and our ability to provide comprehensive support and service to customers worldwide.
No assurance can be given that patents will not be challenged, invalidated or circumvented, or that the rights granted thereunder will provide us with a sustained competitive advantage. In addition, there can be no assurance that we will be able to protect our technology, or that competitors will not be able to independently develop similar or functionally competitive technologies, design around our patents, or attempt to manufacture and sell infringing products in countries that do not strongly enforce intellectual property rights.
Human Capital
We believe that each employee contributes to our culture of integrity, innovation, and teamwork. We reinforce this culture through our human capital development programs that drive talent acquisition, retention and employee engagement. These programs include carefully designed compensation across all levels, a variety of training, diversity and inclusion objectives, and other initiatives.
Our compensation programs help attract and retain key talent and are designed for our employees to share in our company’s success. These programs focus on compensation that we believe is market-competitive, reflects company performance, and aligns with drivers of stockholder value with differentiation based on performance, skills, geographic location, and tenure. We use information from outside compensation and benefits consulting firms to evaluate the competitiveness of the compensation we offer to employees in specific job types, and the structure of our compensation programs, to help provide benchmarking against our peers within the industry.
We offer a variety of benefits such as health insurance, paid and unpaid leaves, retirement, life and disability/accident coverage as applicable to their geographic location. We also offer a variety of other benefits which allow employees to select the options which meet their needs such as for wellness, insurance and professional services.
Our training initiatives promote the continuous improvement of our workforce to keep pace with an ever-increasingly complex business and industry. In addition to formal training, the capabilities of our workforce are intended to grow through structured feedback, mentorship, team building, career progression, tuition assistance, and a culture of transparency. In 2020, we implemented a new training management platform designed to allow for a more organized and efficient administration of training to our employees. Our training initiatives are designed to foster skills development, compliance and our company values.
We leverage both formal and informal programs to identify, foster, and retain top talent. On an annual basis, we have conducted a talent review process with our chief executive officer, leaders of our business units and functions that is focused upon performance, potential, diversity, and succession for critical roles.
Our commitment to diversity and inclusion is a significant part of our human capital development programs. We believe that the recruitment, retention and promotion of a balanced workforce is an important driver of company performance. We support these values through sponsored events, networking groups, and management objectives. As an equal opportunity employer, we develop and implement an annual and targeted affirmative action plan reflecting specific metrics.
9
We also inspire employee engagement through our commitment to corporate social responsibility, including in defined focus areas of sustainable technology, health and safety, labor and human rights, energy and climate change, supply chain responsibility and waste and chemical management.
Our workplace health and safety programs include robust policies, procedures, training programs, and self-audits. Nearly all of our manufacturing employees are located in California, Oregon and Germany, where workplace safety and labor regulations support maintaining high standards of employee protection. We have also been demonstrating a focus on health and safety in our response to the COVID-19 pandemic world-wide, including work-from-home flexibility, requiring those who may be sick to stay home; COVID-19 safety protocols across all locations, including social distancing, personal protective equipment and cleanings; regular internal communication regarding impacts of the COVID-19 pandemic and safety protocols; and temperature screening at our manufacturing facilities.
We believe that our current human capital is appropriate to serve the requirements of our business, and that our human capital development programs and other initiatives are well designed to maintain the quality of our human capital.
For our manufacturing activities, the speed at which we can recruit, train and deploy quality new and replacement personnel is an important part of our ability to ramp up and maintain our production capacity. We rely upon both employees and resources from staffing firms to meet our needs for direct labor. Speed, accuracy and agility in this process is important to our business. Similarly, it is important to our business that we are able to regularly recruit and train quality new and replacement design and engineering staff. For example, our probe card products require that we develop custom designs for our customers’ new product designs. We face strong competition from companies in a variety of technology fields to secure the engineering talent that we require. In addition, restrictions on immigration and skilled-worker visas in a variety of jurisdictions impacts the ease and flexibility with which we can develop these resources.
As of December 25, 2021, we had 2,293 regular full-time employees, including 1,396 in operations, 418 in research and development, 318 in sales and marketing and 161 in general and administrative functions. By region, 1,644 of our employees were in North America, 371 in Asia and 278 in Europe. As of December 25, 2021, our Probe Cards Segment had 1,690 regular full-time employees, our Systems Segment had 407 regular full-time employees, plus we had 196 regular full-time employees in corporate functions. None of our employees in the United States are covered by a collective bargaining agreement. Certain employees at our manufacturing facility in Germany are represented by a works council. Our employees take pride in their work and we believe that our overall relations with our employees is positive.
Available Information
We maintain a website at http://www.formfactor.com. We make available free of charge on our website our Annual Reports on Form 10-K, Quarterly Reports on Form 10-Q, current reports on Form 8-K and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Exchange Act, as soon as reasonably practicable after we electronically file such material with, or furnish it to, the United State Securities and Exchange Commission, or SEC. The reference to our website does not constitute incorporation by reference of the information contained at the site.
Item 1A: Risk Factors
In addition to the other information in this Annual Report on Form 10-K, you should carefully consider the risk factors discussed in this Annual Report on Form 10-K in evaluating FormFactor and our business. If any of the identified risks actually occur, our business, financial condition and results of operations could be materially adversely affected, the trading price of our common stock could decline, and you may lose all or part of your investment in our common stock. The risks and uncertainties described in this Annual Report on Form 10-K are not the only ones we face. Additional risks that we currently do not know about, or that we do not consider sufficiently important to describe here in accordance with applicable regulations, may also impair our business operations or the trading price of our common stock.
Risks Relating to our Operations and the Nature of Our Business
The markets in which we participate are competitive, and if we do not compete effectively, our operating results could be harmed.
We have experienced increased competition in the markets in which we operate, and we expect competition to intensify in the future. Increased competition has resulted in, and in the future may result in, price reductions, reduced gross margins or loss of market share.
10
Existing competitors might introduce new competitive products for the same markets that our products currently serve. These products may have better performance, lower prices, shorter delivery times or broader acceptance than our products.
In addition, new competitors, including test equipment manufacturers, may offer comparable or new technologies that reduce the value of our products. Also, semiconductor manufacturers may implement chip designs or methodologies that increase test throughput, reduce test content, or change their test procedures, thereby eliminating some or all of our current product advantages.
Our current or potential competitors may have larger customer bases, more established customer relationships or greater financial, technical, manufacturing, marketing and other resources than we do. As a result, they might be able to respond more quickly to new or emerging technologies and changes in customer requirements, devote greater resources to the development, promotion, sale and support of their products, and reduce prices to increase market share.
If we do not innovate and keep pace with technological developments in the semiconductor industry, our products might not be competitive, and our revenues and operating results could suffer.
We must continue to innovate and to invest in research and development to improve our competitive position and to meet the test and measurement requirements of our customers. Our future growth depends, in significant part, upon our ability to work effectively with and anticipate the future technical and operational needs of our customers and to develop and support new products and product enhancements to meet these needs on a timely and cost-effective basis. Our customers’ needs are becoming more challenging as the semiconductor industry continues to experience rapid technological change driven by the demand for complex circuits that are shrinking in size, are increasing in speed and functionality, and are produced on shorter cycle times and at reduced unit cost.
Successful product design, development and introduction on a timely basis require that we:
•collaborate with customers to understand their future requirements;
•design innovative and performance-enhancing product architectures, technologies and features that differentiate our products from those of our competitors;
•in some cases, engage with third parties who have particular expertise in order to complete one or more aspects of the design and manufacturing process;
•qualify with customers new products, or an existing product incorporating new technology;
•transition our products to new manufacturing technologies, as necessary;
•offer our products for sale at competitive price levels while maintaining our gross-margins within our financial model;
•identify emerging technological trends in our target markets;
•maintain effective marketing strategies;
•respond effectively to technological changes or product announcements by others; and
•adjust to changing market conditions quickly and cost-effectively.
Not only do we need the technical expertise to implement the changes necessary to keep our technologies current, but we must also rely heavily on the judgment of our management to anticipate future market trends. If we are unable to timely predict industry changes or industry trends, or if we are unable to modify our products or design, manufacture and deliver new products on a timely basis, or if a third party with which we engage does not timely deliver a component or service for one of our product modifications or new products, we might lose customers or market share. In addition, we might not be able to recover our research and development expenditures, which could harm our operating results.
We depend upon the sale of our probe card products for the substantial majority of our revenues.
We derive the majority of our revenues from the sale of our probe card products, primarily to manufacturers of microprocessor, foundry & logic and memory devices, despite progress in diversifying our product offerings. We anticipate that sales of probe cards will represent a substantial majority of our revenues for the foreseeable future. Our success depends in large part upon the continued acceptance of our products on the basis of a variety of factors including performance, quality, timely delivery and price, and depends upon our ability to continue to develop and introduce new products that meet our customers’ requirements. The degree to which we depend upon the sales of our probe card products for our revenues may increase our susceptibility to failures to satisfy the customers for such products, which may adversely affect our revenues and our ability to grow our business.
We derive a substantial portion of our revenues from a small number of customers.
A relatively small number of customers account for a significant portion of our revenues. Two customers represented a combined 31.8% of total revenues in fiscal 2021, one customer represented 31.5% of total revenues in fiscal 2020 and two customers represented a combined 36.8% of total revenues in fiscal 2019. We anticipate that sales of our products to a relatively
11
small number of customers will continue to account for a significant portion of our revenues and can drive material fluctuations in sales volume. Consolidation in the semiconductor industry may increase this concentration. In the future, the loss of any of these customers, or cancellation, reduction or deferral of even a small number of purchases of our products by these customers, could significantly reduce our revenues. A decline in our customers' market share and commercial success, including their ability to compete favorably within their respective end markets, could significantly impact demand for our products and reduce our revenues. Cancellations, reductions, deferrals or non-payment of invoices, could result from another downturn in the semiconductor industry, manufacturing delays, quality or reliability issues with our products, or from interruptions to our customers’ operations due to fire, natural disasters or other events, or other issues with the financial stability of our customers. Furthermore, because our probe cards are custom products designed for our customers’ unique wafer designs, any cancellations, reductions or delays can result in significant non-recoverable costs. In some situations, our customers might be able to cancel or reduce orders without a significant penalty.
If our relationships with our customers deteriorate, our product development activities could be harmed.
The success of our product development efforts depends upon our ability to anticipate market trends and to collaborate closely with our customers. Our relationships with these customers provide us with access to valuable information regarding manufacturing and process technology trends in the semiconductor industry, which enables us to better plan our product development activities. These relationships also provide us with opportunities to understand the performance and functionality requirements of our customers, which improves our ability to customize our products to fulfill their needs. Our relationships with our customers could deteriorate as a result of a variety of factors, such as if they become concerned about our ability to deliver quality products on a timely basis or to protect their intellectual property. Many of our customers are large companies that place significant orders with us, and the consequences of deterioration in our relationship with any of these companies could be significant due to the competitiveness of our industry and the significant influence that these companies exert in our market.
Consolidation in the semiconductor industry and within the semiconductor test equipment market could adversely affect the market for our products and negatively impact our ability to compete.
Consolidation in the semiconductor industry may reduce our customer base and could adversely affect the market for our products, which could cause a decline in our revenues. With consolidation, the number of actual and potential customers for our products has decreased in recent years. Consolidation may lead to relatively fewer opportunities to sell our products if we are not chosen as a supplier by any given prospective customer, and may lead to increased pricing pressures from customers that have greater volume purchasing power.
There has also been consolidation within the semiconductor test equipment market. This consolidation trend could change our interactions and relationships with complementary tester, instrument, and prober suppliers and negatively impact our revenue and operating results.
Changes in customers’ test strategies, equipment and processes could decrease customer demand for our products.
The demand for our products depends in large part upon the number of semiconductor designs, the pace of technology and architecture transitions in chip designs and overall semiconductor unit volume. The number of probe cards involved in a customer’s wafer testing can depend upon the number of devices being tested, the complexity of these devices, the test software program, the test equipment itself, and the utilization of chip designs featuring design-for-testability or self-testing capabilities. Customers may demand fewer probe cards or probing systems if they use test strategies that reduce the technical requirements on test equipment, improve available data on device performance earlier in the manufacturing process, or test devices later in the manufacturing process. Changes in the effectiveness of test technologies and test strategies used by customers may cause us to lose sales and revenues.
We may also lose sales if new semiconductor technologies or designs are implemented which cannot be efficiently tested using the products that we offer, or if semiconductor manufacturers reduce the amount or degree of testing that they perform. We may also incur significant research and development expenses in order to introduce new product architectures and platforms to serve the testing needs of new semiconductor technologies.
Cyclicality in the semiconductor industry may adversely impact our sales.
The semiconductor industry has historically been cyclical and is characterized by wide fluctuations in product supply and demand. From time to time, this industry has experienced significant downturns, often in connection with, or in anticipation of, maturing product and technology cycles, excess inventories and declines in general economic conditions. The global economic and semiconductor downturns have caused and may in the future cause our operating results to decline dramatically from one period to the next. Global economic stability can be negatively affected by a variety of factors and interrelationships, including the impacts of Brexit, epidemics and pandemics (such as the current COVID-19 pandemic), military conflicts, climate change, trade barriers and other factors acting alone or in combination. Some of these factors can also have a more direct adverse impact
12
upon our operations to varying degrees. Our business depends heavily upon the development and manufacture of new semiconductors, the rate at which semiconductor manufacturers make transitions to smaller nanometer technology nodes and implement tooling cycles, the volume of production by semiconductor manufacturers and the overall financial strength of our customers, which, in turn, depend upon the current and anticipated market demand for semiconductors and products, such as servers, personal computers, automobiles and cell phones, that use semiconductors. During industry downturns, semiconductor manufacturers sharply curtail their spending, including their spending on our products, which may adversely impact our revenues, gross margins and results of operations. Further, a protracted downturn could cause one or more of our customers to become insolvent, resulting in a loss of revenue and impacting our ability to collect on accounts receivable. The timing, length and severity of these cyclical downturns are difficult to predict and our business depends on our ability to plan for and react to these cyclical changes.
Because we generally do not have a sufficient backlog of unfilled orders to meet our quarterly revenue targets, revenues in any quarter are substantially dependent upon customer orders received and fulfilled in that quarter.
Our revenues are difficult to forecast because we generally do not have sufficient backlog of unfilled orders to meet our quarterly revenue targets at the beginning of a quarter. Rather, a substantial percentage of our revenues in any quarter depend upon customer orders for our products that we receive and fulfill in that quarter. Because our expense levels are based in part on our expectations as to future revenues and to a large extent are fixed in the short term, we might be unable to adjust spending in time to compensate for any unexpected shortfall in revenues. Accordingly, any significant shortfall of revenues in relation to our expectations could hurt our operating results.
If our ability to forecast demand for our products or the predictability of our manufacturing yields deteriorates, we could incur high inventory losses.
Each semiconductor chip design requires a custom probe card. Because our probe card products are design-specific, demand for these products is difficult to forecast. Due to our customers’ short delivery time requirements, we often design and procure materials and, at times, produce our products in anticipation of demand for our products rather than in response to an order. Our manufacturing yields and inventory requirements, particularly for new products or when we are operating at high output levels, have at times been unpredictable. If we do not obtain orders as we anticipate, if we suffer manufacturing errors, or if we build additional inventory to compensate for unpredictable manufacturing yields, we could have excess or obsolete inventory that we may not be able to sell, which would likely result in inventory write-offs or material charges for scrap.
If we are unable to efficiently manufacture our existing and new products, our business may be materially adversely affected.
We must continuously improve our manufacturing processes in an effort to increase yields and product performance, lower our costs and reduce the time required for us to design, manufacture and deliver our products in volume. If we cannot do these things, both our existing products and our new products may not be commercially successful, our revenues may be adversely affected, our customer relationships and our reputation may be harmed and our business may be materially adversely affected.
To improve our manufacturing processes, we have incurred, and may incur in the future, substantial costs in an effort to optimize capacity and yields, open new manufacturing facilities, implement new manufacturing technologies, methods and processes, purchase new equipment, upgrade existing equipment and train technical personnel. We have experienced, and may experience in the future, manufacturing delays and other inefficiencies in connection with implementation of these improvements and customer qualifications of new processes or products, which have caused and could cause in the future, our operating results to decline. These delays and other inefficiencies may arise from a variety of factors, including disruptions to, or the unavailability of, sufficient electrical power as a result of insufficient electrical power infrastructure in the regions where we have manufacturing facilities such as in California and China.
We have also experienced, and may experience in the future, difficulties in manufacturing our complex products in volume on time, and at acceptable yields and cost, and installation issues in the field, due to the complexity of customer requirements.
If we are unable to continue to reduce the time it takes for us to design and produce products, our growth could be impeded.
Our customers continuously seek to reduce the time it takes them to introduce new products to market. The cyclicality of the semiconductor industry, coupled with changing demands for semiconductor products, requires our customers to be flexible and highly adaptable to changes in the design, volume and mix of products they must produce. We may be unable to design, configure and produce our products within the short cycle times required to respond to such rapid changes. We have lost sales in the past where we were unable to meet a customer’s required delivery schedules. If we are unable to continue to reduce the time it takes for us to design, manufacture and ship our products in response to the needs of our customers, our competitive position could be harmed and we could lose sales.
13
Products that do not meet specifications or that contain defects could damage our reputation, decrease market acceptance of our technology, cause us to lose customers and revenues, and result in liability to us.
The complexity and ongoing development of our product designs and manufacturing processes could lead to design or manufacturing problems. Problems might result from a number of factors, including design defects, materials failure, failure of components manufactured by our suppliers to meet our specifications, contamination in the manufacturing environment, impurities in the materials used, and unknown sensitivities to process conditions such as temperature and humidity, and equipment failures. Any errors or defects could:
•cause lower than anticipated yields and lengthen delivery schedules;
•cause delays in product shipments;
•cause delays in new product introductions;
•cause us to incur warranty expenses;
•result in increased costs and diversion of development resources;
•cause us to incur increased charges due to unusable inventory;
•require design modifications;
•could have implications for timing of revenue recognition and associated costs; or
•decrease market acceptance or customer satisfaction with these products.
The occurrence of any one or more of these events could adversely affect our business, reputation and operating results.
As part of our sales process, we could incur substantial sales and engineering expenses that do not result in revenues.
Our customers generally expend significant efforts evaluating and qualifying our products prior to placing an order. While our customers are evaluating our products, we might incur substantial sales, marketing, and research and development expenses. For example, we typically expend significant resources educating our prospective customers regarding the uses and benefits of our products and customizing them to the potential customer’s needs, for which we might not be reimbursed. The substantial resources we commit to our sales efforts may not result in any revenues from a customer. For example, many semiconductor processes, architectures, and designs never reach production, including those for which we may have expended development effort and expense. In addition, prospective customers might decide not to use our products or use our products for a relatively small percentage of their requirements after we have expended significant effort and expense toward product design, development, and/or manufacture.
We obtain some of the components and materials we use in our products from a sole source or a limited group of suppliers, and the partial or complete loss of one of these suppliers could cause production delays.
We obtain some of the components and materials used in our products, such as printed circuit board assemblies, plating materials and ceramic substrates, from a sole source or a limited group of suppliers, and in some cases alternative sources are not currently available. Because we rely on purchase orders rather than long-term contracts with the majority of our suppliers, we cannot guarantee our ability to obtain components and materials in the long term. A sole or limited source supplier could increase prices, which could lead to a decline in our gross profit. Our dependence upon sole or limited source suppliers exposes us to several other risks, including inability to obtain an adequate supply of materials, late deliveries, poor component quality, and business disruptions while we seek to identify and qualify alternative suppliers. This could be exacerbated by certain events outside the control of either the supplier or us, such as the COVID-19 pandemic. The occurrence of any of these risks could adversely impact our business, results of operations and financial condition.
Our operations, or those of our important suppliers, business partners and customers could be adversely affected by events outside of our control such as natural disasters, pandemics and man-made disasters.
Our business is vulnerable to the direct and indirect impact of natural and man-made disasters, such as floods, earthquakes, volcanic eruptions, nuclear accidents, acts of terrorism, epidemics, pandemics, military conflicts, climate change, and other factors acting alone or in combination. It is also possible that future natural and man-made disasters could negatively impact the sales of our products as a result of impacts upon our customers’ ability to make or sell their products, or impacts upon our suppliers’ ability to supply components to us on a timely basis.
For example, the COVID-19 pandemic has shown the extent to which new pathogens are capable of disrupting business operations and economic activity locally and worldwide. Epidemics and pandemics can severely disrupt global supply chains, including for parts and materials that we use to manufacture our products, and affect economic conditions in the markets for our products. The circumstances which give rise to epidemics and pandemics from new or existing pathogens with similar impacts are expected to persist indefinitely.
Another example of events outside of our control arises from our manufacturing facilities being located in seismically active areas in California and Oregon. The manufacturing equipment and processes that we use can be severely disrupted by seismic
14
activity. A significant seismic event in the areas of our operations could have a materially negative impact on our operations, financial results or financial condition.
Much of the infrastructure on which we rely for our operations is outside of our control, such as for electric power. We have recently experienced disruptions to electrical power at some of our premises in California and China, especially when aging infrastructure or inadequate electric power service has been impacted by high demand, fires, and weather which may worsen over time with climate change, and other events. Our efforts to mitigate the effects on us from interruptions in the availability of electric power, or other infrastructure, may not adequately prevent materially negative impacts on our operations, and in turn our financial results.
The COVID-19 pandemic has impacted, and is expected to continue to negatively impact, our operations, and those of our important suppliers, business partners and customers.
We are exposed to risks associated with public health crises and outbreaks of contagious diseases, such as COVID-19. To date, COVID-19 has had, and may continue to have, an adverse impact on our operations, our supply chains and our expenses, including as a result of precautionary measures that we take in response to COVID-19. A variety of health orders and regulations arising from the pandemic apply to our operations and employees in the regions where we operate which have had, and will continue to have, negative affects upon our operations and business. The extension of existing government orders and implementation of new orders or mandates, such as government vaccine and testing mandates, could impact the availability of members of our workforce or lead to the loss of key employees, further adversely impacting our business. Implementation of such mandates and requirements could also have similar consequences for our suppliers, which may impact their ability to deliver the goods and services to us. Even as the availability of vaccines has begun to relieve the economic effects of the COVID-19 pandemic in the future, there remains substantial risk that vaccination rates will remain slow, new variants of the virus may continue to impede the vaccines’ efficacy, or other factors may prolong or worsen the pandemic and its direct and indirect affects upon our business.
A significant amount of our management resources have been, and will continue to be, focused on mitigating the negative impacts of COVID-19 on our business. This has required, and will continue to require, a substantial investment of time and resources across our enterprise which may continue to negatively impact other valuable activities, such as the development of new technologies, products or capabilities. In addition, many of our employees are working remotely for an extended period, which can increase operational risk and cybersecurity risks. If we do not respond appropriately to the COVID-19 pandemic, or if employees, customers or others do not perceive our response positively, we could suffer damage to our reputation, which could also adversely affect our business.
We obtain some of the components and materials used in our products from a sole source or a limited group of suppliers, and in some cases alternative sources are not readily available. The COVID-19 pandemic may heighten the risks posed by our dependence upon sole or limited source suppliers to the extent that the pandemic could disrupt the operations of one or more of these suppliers, resulting in an inability to obtain an adequate supply of materials, late deliveries or poor component quality while we seek to identify and qualify alternative suppliers.
The extent to which the COVID-19 pandemic impacts our operations and those of our important suppliers, business partners and customers will depend on numerous evolving factors and future developments that we are not able to predict, including but not limited to: the severity and duration of the pandemic; governmental, business and other actions including government vaccine and testing mandates (which could include further restrictions on our operations); the ongoing requirements of social distancing and health orders; the impacts on our supply chain; the impact of the pandemic on economic activity; the extent and duration of the effect on business confidence and investments by our customers; the effects of changes to our operations that may continue indefinitely; the effects on our workforce and our ability to meet our staffing needs, particularly if members of our workforce are exposed or infected; any impairments in the value of our assets; and the potential impacts upon our internal controls, including those over financial reporting, that may result from changes in working environments and other circumstances. All of these circumstances are highly uncertain and cannot be predicted. In addition, the circumstances which give rise to new or existing infectious diseases becoming epidemics or pandemics with potentially similar impacts are expected to persist.
Adverse global, regional and national economic conditions resulting from the COVID-19 pandemic could have a negative effect on our business, results of operations and financial condition and liquidity.
The COVID-19 pandemic has adversely affected, and may continue to adversely affect, national, regional and global economies and financial markets. Although the long-term macroeconomic effects of the pandemic cannot be predicted with certainty, the continued progression or persistence of the pandemic may result in global, regional or national economic slowdowns or other economic downturns. Such downturns could curtail or delay spending by businesses and consumers which may ultimately result in reductions in the demand for our products and greater volatility in demand and supply conditions. The COVID-19 pandemic has also increased uncertainty in global credit and financial markets. The impacts of such uncertainty and disruptions
15
to the availability of credit or other sources of capital as the pandemic continues or worsens, could also adversely affect our ability to access capital on favorable terms to meet our objectives. Any of these factors could have a material adverse impact on our business, results of operations, financial condition and cash flows.
In addition, governments in several countries where we operate, including the United States, have enacted stabilization and stimulus measures in an effort to counteract some of the economic impacts of COVID-19. The demand and business environments in which we operate have benefited from some of these measures, while the long-term economic impacts of increased government borrowing to fund these measures may have future negative effects on certain economies. Any significant discontinuations, reductions, or other changes to such stabilization and stimulus programs may harm our customers’ or suppliers’ financial results and financial condition, and could also have an adverse macroeconomic impact that may lead to reductions in the demand for our products. Even if maintained or expanded, such stimulus and stabilization measures may fail over the long term to mitigate the adverse economic effects of the pandemic, and may fail to prevent or exacerbate any long-term economic downturns.
As a result of the uncertain scope and duration of the COVID-19 pandemic and the uncertain timing of any national, regional or global recovery and economic normalization, we are unable to estimate the ultimate impacts on our operations and financial results.
We rely on the security and integrity of our electronic data systems, and the proper design and implementation of these systems for our business requirements, and our business can be damaged by deficiencies, disruptions, security breaches or compromises of these systems.
We rely on electronic data systems, including a variety of software and networking, computing and storage equipment and other information technologies, to operate and manage our business and to collect, process, maintain, and safeguard information, including information belonging to our customers, partners, and personnel.
Our electronic data systems may be subject to defects, failures or disruptions as a result of, among other things, natural disasters, accidents, power disruptions, telecommunications failures, deficiencies in new system designs and implementations, acts of terrorism or war, physical security breaches, computer viruses or other cyber attacks.
For example, in fiscal 2020, we discovered a data breach incident involving malware and related behaviors that resulted in unauthorized access to our information technology systems. Although we do not believe this incident had any significant impacts on our production and ordinary course operations, such incidents or other system failures or disruptions could subject us to downtime and delays, compromise or loss of sensitive or proprietary information, destruction or corruption of data, financial losses from remedial actions, breaches of obligations to third parties under privacy laws or contracts, or damage to our reputation or customer relationships. Any of the foregoing could have a material adverse effect on our business, operating results and financial condition.
In addition, we are actively implementing new electronic data systems relating to parts of our business, operations and accounting.The process of implementing and commencing our reliance on these new systems involves particularly higher risks of deficiencies or disruptions than the continued use of systems which have had a longer history of use and observed performance in the Company.
Because we conduct most of our business internationally, we are subject to operational, economic, financial and political risks abroad.
Sales of our products to customers outside of the United States represent a significant part of our past and anticipated revenues. Our international sales as a percentage of our revenues were 84%, 82% and 74% for fiscal 2021, 2020 and 2019, respectively. Certain of our non-U.S. based customers also purchase through their subsidiaries in the United States. In the future we expect international sales to continue to account for a significant percentage of our revenues. Accordingly, we will be subject to risks and challenges that we would not otherwise face if we conducted our business solely in the United States.
These risks and challenges include:
•compliance with a wide variety of foreign laws and regulations;
•legal uncertainties regarding taxes, tariffs, quotas, export controls, export licenses and other trade barriers;
•political and economic instability or foreign conflicts, including trade wars, that involve or affect the countries of our customers;
•difficulties in collecting accounts receivable and longer accounts receivable payment cycles;
•difficulties in staffing and managing personnel, distributors and representatives;
•reduced protection for intellectual property rights in some countries;
16
•currency exchange rate fluctuations, which could affect the value of our assets denominated in local currency, as well as the price of our products relative to locally produced products;
•the impact of pandemics or other disruptions to trade and production;
•seasonal fluctuations in purchasing patterns in other countries; and
•fluctuations in freight rates and transportation disruptions.
Any of these factors could harm our existing international operations, impair our ability to continue expanding into international markets or materially adversely affect our operating results. Political developments in the United States and elsewhere may increase the risks and uncertainties associated with conducting international business, including the possibilities of greater tariffs and other trade barriers in the regions where we conduct business. In fiscal 2021, we observed a continuing trend of increasing risks and challenges in the conduct of our international business activities, including expanded tariffs and other trade barriers affecting the United States and China. Additionally, we are required to comply with foreign import and export requirements, customs and value added tax standards that can be unclear or complex. Our failure to meet these requirements and standards could negatively impact our business operations.
Our foreign operations expose us to additional risks relating to currency fluctuations.
Our international operations are significant to our revenues and net income, and we plan to continue to grow internationally. We have significant business operations located in Germany. While we report our financial results in U.S. dollars, we incur certain costs in other currencies, and have certain foreign currency denominated assets and liabilities. We, therefore, face exposure to fluctuations in currency exchange rates. Significant fluctuations in exchange rates between the U.S. dollar and foreign currencies may adversely affect our revenues and earnings, despite our hedging of a portion of our international currency exposures. Additionally, hedging programs are inherently risky and could expose us to additional costs and risks that could adversely affect our financial condition and results of operations.
Increasingly restrictive export regulations and other trade barriers may materially harm our business.
Sales of our products to customers outside of the United States represent a significant part of our past and anticipated revenues, including sales involving exports from the United States to China. There is a continuing trend of increasing trade barriers affecting exports and imports between the United States and China. For example, the U.S. Department of Commerce, Bureau of Industry and Security (“BIS”), has recently amended the U.S. Export Administration Regulations to expand license requirements on exports to entities in China that may support military end uses. These rules expand export license requirements on a broader set of items from the U.S., including many of our products and for a broader set of customers in China and elsewhere. The BIS has also broadened the application of U.S. export controls to items which are the foreign direct products of the U.S. technologies which can affect a variety of customers outside of China who supply products to certain entities in China. There is no assurance that we will obtain any export licenses on a timely basis or at all. There also remains considerable uncertainty regarding the interpretation and implementation of new regulations. In addition, the reaction to these rules by governments and private businesses outside the U.S., particularly in China, may be expected to include retaliatory controls and preferences for non-U.S. or local suppliers. In China we are already observing stronger preferences for non-U.S. suppliers in general, and in favor of new and existing local suppliers in particular. These and other regulatory and policy changes, and the reactions of customers to such changes, in the U.S. and elsewhere could materially and negatively affect our future sales and operating results.
If we fail to protect our proprietary rights, our competitors might gain access to our technology, which could adversely affect our ability to compete successfully in our markets.
If we choose not to protect our proprietary rights or fail in our efforts to protect our proprietary rights, our competitors might gain access to our technology. Unauthorized parties might attempt to copy aspects of our products or to obtain and use information that we regard as proprietary. Others might independently develop similar or competing technologies or methods or design around our patents. In addition, the laws of many foreign countries in which we or our customers do business do not protect our intellectual property rights to the same extent as the laws of the United States. As a result, our proprietary rights could be compromised, our competitors might offer products similar to ours and we might not be able to compete successfully. We also cannot assure that:
•our means of protecting our proprietary rights will be adequate;
•patents will be issued from our pending or future applications;
•our existing or future patents will be sufficient in scope or strength to provide any meaningful protection or commercial advantage to us;
•our patents or other intellectual property will not be invalidated, circumvented or successfully challenged in the United States or foreign countries; or
17
•others will not misappropriate our proprietary technologies or independently develop similar technologies, duplicate our products or design around any of our patents or other intellectual property, or attempt to manufacture and sell infringing products in countries that do not strongly enforce intellectual property rights.
We have spent, and may be required to spend in the future, significant resources to monitor and protect our intellectual property rights. Any litigation, whether or not resolved in our favor, and whether initiated by us or by a third party, could result in significant and possibly material expenses to us and divert the efforts of our management and technical personnel.
We might be subject to claims of infringement of other parties’ proprietary rights.
Our industry is characterized by uncertain and conflicting intellectual property claims. As we have in the past, we may receive claims that we are infringing intellectual property rights of others. The resolution of intellectual property claims, with or without merit, could be time consuming, result in costly litigation with highly uncertain outcomes, or impact our delivery of products. In the event of an adverse judgement or settlement, we might be required to pay substantial amounts, cease the use or sale of infringing products, spend significant resources to develop non-infringing technology, discontinue the use of certain technology or enter into license agreements. License agreements might not be available on terms acceptable to us or at all. In addition, certain of our customer contracts contain provisions that require us to defend or indemnify our customers for third party intellectual property infringement claims, which could increase the costs and negative impacts of intellectual property claims.
We have recorded restructuring, inventory write-offs and asset impairment charges in the past, in fiscal 2021, and may do so again in the future, which could have a material negative impact on our business.
We recorded restructuring charges in fiscal 2021 and 2019 and will record further restructuring charges in the near future in relation to the recent restructuring announced during fiscal 2021. We may implement restructuring plans in the future, which would require us to take additional, potentially material, restructuring charges related to employee terminations, asset disposal or exit costs. We may also be required to write-off additional inventory if our product build plans or usage of inventory experience declines, and such additional write-offs could constitute material charges. In addition, significant adverse changes in market conditions could require us to take additional material impairment charges related to our long-lived assets if the changes impact the critical assumptions or estimates that we use in our assessment of the recoverability of our long-lived assets. Any such additional charges, whether related to restructuring, asset impairment or factory underutilization, may have a material negative impact on our operating results and related financial statements.
We may not be able to recruit or retain qualified personnel.
We believe our ability to manage successfully and grow our business and to develop new products depends, in large part, on our ability to recruit and retain qualified employees, particularly highly skilled technical, sales, management, and other key personnel. Competition for qualified resources is intense, and the increased availability of work-from-home arrangements accelerated by the COVID-19 pandemic has intensified and expanded competition. Other companies may have greater resources available to provide substantial inducements to lure key personnel away from us or to offer more competitive compensation packages to individuals we are trying to hire.
Our failure to comply with environmental laws and regulations could subject us to significant fines and liabilities, and new laws and regulations or changes in regulatory interpretation or enforcement could make compliance more difficult and costly.
We are subject to various U.S. federal, state and local, and foreign governmental laws and regulations relating to the protection of the environment, including those governing the discharge of pollutants into the air and water, the management and disposal of hazardous substances and wastes, the cleanup of contaminated sites and the maintenance of a safe workplace. We could incur substantial costs, including cleanup costs, civil or criminal fines or sanctions and third-party claims for property damage or personal injury, as a result of violations of or liabilities under environmental laws and regulations or non-compliance with the environmental permits required at our facilities.
Environmental laws, regulations and permits could require the installation of costly pollution or waste control equipment or operational changes to limit waste or emissions or decrease the likelihood of accidental releases of hazardous substances. In addition, changing laws and regulations, new laws and regulations, stricter enforcement of existing laws and regulations, the discovery of previously unknown contamination at our or others’ sites or the imposition of new cleanup requirements could require us to curtail our operations, restrict our future expansion, subject us to liability and cause us to incur future costs that could harm our operations, thereby adversely impacting our operating results and cash flow.
18
We are exposed to additional risks as a result of increased attention by our stakeholders to environmental, social and governance (“ESG”) matters.
Our stakeholders, including customers, investors, advisory firms, employees, and suppliers, among others, are increasing their attention to, and establishing expectations for, ESG and related matters. These expectations can extend to our corporate practices, initiatives, and disclosures, as well as stakeholder standards or preferences for investments or doing business. Third-party agencies have also established or added standards for rating companies on a range of ESG-related factors that may be inconsistent and subject to change. As a result, these expectations may impact the attractiveness of our business, the manner in which we do business, our reputation, the costs of doing business, and the willingness of these stakeholders to engage with, invest in, or retain us. We may be further impacted by the adoption and evolution of ESG-related regulation and legislation in the jurisdictions in which we do business, which could result in increased compliance, operational, and other costs.
In addition, the Company has provided voluntary disclosures on ESG matters, including regarding energy usage, greenhouse gas emissions, health and safety, diversity and inclusion, and labor and human rights. Such disclosures are aspirational and based on frameworks and standards for such initiatives and progress that are still developing, assumptions that may change, and disclosure control and procedures that continue to evolve. We may fail, or be perceived to fail, in attaining or maintaining our ESG-related initiatives. The topics on which we focus may not be popular with our stakeholders. These events or perceptions may expose us to additional reputational and operational risks.
Risks Relating to Our Acquisitions
We have made acquisitions, and may make additional acquisitions or investments in the future, which could put a strain on our resources, cause ownership dilution to our stockholders or adversely affect our financial results.
Our acquisitions or investments may subject us to new or heightened risks. Integrating any newly acquired businesses, products or technologies into our company draws upon our resources in ways that can be expensive and time consuming. These activities can substantially affect our financial resources, could cause delays in product delivery and might not be successful. Acquisitions and investments can divert management’s attention and expose our business to new liabilities or risks associated with entering into new business activities. In addition, we might lose key employees while integrating new organizations. We might not be successful in integrating any acquired businesses, products or technologies, and might not achieve anticipated revenues and cost benefits. Investments that we make may not result in a return consistent with our projections upon which such investments are made, or may require additional investment that we did not originally anticipate. In addition, acquisitions can result in customer dissatisfaction, performance problems with an acquired company, potentially dilutive issuances of equity securities or the incurrence of debt and restrictive debt covenants, contingent liabilities, possible impairment charges related to goodwill or other intangible assets or other adverse impacts or circumstances. If any of these risks were to come about, our business, financial results and stock price could be materially and adversely affected.
If goodwill or other intangible assets that we recorded, or will record, in connection with our acquisitions become impaired, we could be required to take significant charges against earnings.
In connection with our accounting for acquired businesses, we record a significant amount of goodwill and other intangible assets. Under U.S. generally accepted accounting principles, or GAAP, we must assess, at least annually and potentially more frequently, whether the value of goodwill and other indefinite-lived intangible assets have been impaired. Finite-lived intangible assets are assessed for impairment in the event of an impairment indicator. Any reduction or impairment of the value of goodwill or other intangible assets will result in a charge against earnings, which could materially adversely affect our results of operations and stockholders’ equity in future periods.
Risks Relating to Owning Our Stock
If we fail to maintain an effective system of internal and disclosure controls and procedures, we may not be able to accurately report our financial results or prevent fraud.
Effective internal and disclosure controls and procedures are necessary for us to provide reliable financial reports, to prevent fraud and to operate successfully as a public company. If we cannot provide reliable financial reports or prevent fraud, our business and reputation may be harmed. We regularly review and assess our internal controls over financial reporting and our disclosure controls and procedures. As part of that process, we may discover material weaknesses in our internal controls.
In addition, we are actively implementing new electronic data systems relating to substantial parts of our business, operations and accounting.The process of implementing and commencing our reliance on these new systems involves particularly higher risks of deficiencies or disruptions in relation to our internal controls and disclosure controls and procedures than the continued use of systems which have had a longer history of use and observed performance in the Company.
19
If we fail to maintain effective controls or timely effect any necessary improvement of our internal and disclosure controls, we may not have accurate information to make management decisions, our operating results could be harmed or we may fail to meet our reporting obligations. Ineffective internal and disclosure controls could also cause stockholders to lose confidence in our reported financial information and our ability to manage our business, which would likely have a negative effect on the trading price of our securities.
The trading price of our common stock has been and is likely to continue to be volatile, and you might not be able to sell your shares at or above the price that you paid for them.
The trading prices of the securities of technology companies have been highly volatile. During fiscal 2021, our stock price (Nasdaq Global Market close price) ranged from $33.07 per share to $51.12 per share. The trading price of our common stock is likely to continue to be subject to wide fluctuations. Factors affecting the trading price of our common stock could include:
•variations in our operating results;
•our forecasts and financial guidance for future periods;
•announcements of technological innovations, new products or product enhancements, new product adoptions at semiconductor customers or significant agreements by us or by our competitors;
•reports regarding our ability to bring new products into volume production efficiently;
•the gain or loss of significant orders or customers;
•changes in the estimates of our operating results or changes in recommendations by any securities analysts that elect to follow our common stock;
•rulings on litigation and proceedings;
•seasonality, principally due to our customers' purchasing cycles;
•market and competitive conditions in our industry, the entire semiconductor industry and the economy as a whole;
•recruitment or departure of key personnel;
•announcements of mergers and acquisition transactions and the ability to successfully integrate the business activities of the acquired/merged company; and
•political and global economic instability, including as a result of trade barriers, natural disasters, epidemics and pandemics (such as the current COVID-19 pandemic), military conflicts, climate change, and other factors acting alone or in combination.
In addition, if the market for technology stocks or the stock market in general experiences loss of investor confidence, the trading price of our common stock could decline for reasons unrelated to our business, operating results or financial condition. The trading price of our common stock also might decline in reaction to events that affect other companies in our industry even if these events do not directly affect us.
Provisions of our certificate of incorporation and bylaws or Delaware law might discourage, delay or prevent a change of control of our company or changes in our management and, therefore, depress the trading price of our common stock.
Delaware corporate law and our certificate of incorporation and bylaws contain provisions that could discourage, delay or prevent a change in control of our company or changes in our management that the stockholders of our company may deem advantageous. These provisions:
•establish a classified board of directors so that not all members of our board are elected at one time (subject to shareholder approval of a declassification amendment at the 2022 annual meeting of Stockholders);
•provide that directors may only be removed “for cause” and only with the approval of 66.7% of our stockholders;
•require super-majority voting to amend some provisions in our certificate of incorporation and bylaws;
•authorize the issuance of “blank check” preferred stock that our board could issue to increase the number of outstanding shares and to discourage a takeover attempt;
•limit the ability of our stockholders to call special meetings of stockholders;
•prohibit stockholder action by written consent, which requires all stockholder actions to be taken at a meeting of our stockholders;
•provide that the board of directors is expressly authorized to make, alter or repeal our bylaws; and
•establish advance notice requirements for nominations for election to our board or for proposing matters that can be acted upon by stockholders at stockholder meetings.
In addition, Section 203 of the Delaware General Corporation Law may discourage, delay or prevent a change in control of our company. Also, each of our named executive officers and certain other executives of the company have entered into change of control severance agreements, which were approved by our Compensation Committee, which could increase the costs associated with a change of control and thus, potentially deter such a transaction.
20
Item 1B: Unresolved Staff Comments
None.
Item 2: Properties
Our corporate headquarters, which includes sales, marketing, administration, manufacturing, engineering, and research and development facilities, is located in Livermore, California, United States. Our corporate headquarters comprises a campus of five buildings totaling approximately 259,000 square feet. We presently lease four of the buildings and own one of the buildings. In addition, we lease office, repair and service, manufacturing and/or research and development space both inside and outside of the United States. The leases expire at various times through 2028. We believe that our existing and planned facilities are suitable for our current needs.
21
Information concerning our properties as of December 25, 2021 is set forth below:
Location
Principal Use
Segment
Square Footage
Ownership
Livermore, California, United States
Manufacturing
Probe Cards
90,508
Owned
Livermore, California, United States
Corporate headquarters, sales, marketing, administration, product design, manufacturing, service and repair, distribution, research and development
Probe Cards
168,636
Leased
Beaverton, Oregon, United States
Sales, marketing, administration, product design, manufacturing, service and repair, distribution, research and development
Probe Cards
98,946
Leased
Thiendorf, Germany
Sales, marketing, administration, manufacturing, service and repair, distribution, research and development
Systems
54,361
Leased
Baldwin Park, California, United States
Manufacturing
Probe Cards
44,000
Leased
Boulder, Colorado, United States
Manufacturing, distribution, research and development
Systems
34,133
Leased
Carlsbad, California, United States
Sales, product design, administration, manufacturing, service and repair, distribution, research and development
Probe Cards
30,876
Leased
San Jose, California, United States
Administration, product design, manufacturing, service and repair, distribution, research and development
Probe Cards
24,758
Leased
Singapore
Sales, administration, product design, service, and field service
All
24,413
Leased
Jubei City, Hsinchu, Taiwan
Sales, administration, product design, field service and repair center
All
18,568
Leased
Bundang, South Korea
Sales, administration, product design, field service, and repair center
All
17,161
Leased
Suzhou, China
Sales, marketing, administration, product design, manufacturing, service and repair, distribution, research and development
All
15,177
Leased
Yokohama City, Japan
Sales, marketing, administration, product design, manufacturing, service and repair, distribution, research and development
All
13,309
Leased
Bergisch Gladbach, Germany
Manufacturing, service and repair, distribution, research and development
Systems
12,235
Leased
Munich, Germany
Sales, manufacturing, service and repair, distribution, research and development
Systems
10,656
Leased
Montbonnot Saint Martin, France
Sales and service
All
4,736
Leased
Shanghai, China
Sales and service
All
3,348
Leased
Dresden, Germany
Sales and service
All
2,960
Leased
Hiroshima, Japan
Repair center
Probe Cards
1,007
Leased
Legnano, Italy
Sales office
All
215
Leased
22
Item 3: Legal Proceedings
From time to time, we may be subject to legal proceedings and claims in the ordinary course of business. As of December 25, 2021, and as of the filing of this Annual Report on Form 10-K, we were not involved in any material legal proceedings. In the future, we may become a party to additional legal proceedings that may require us to spend significant resources, including proceedings designed to protect our intellectual property rights. Litigation can be expensive and disruptive to normal business operations. Moreover, the results of legal proceedings are difficult to predict, and the costs incurred in litigation can be substantial, regardless of outcome.
Item 4: Mine Safety Disclosures
Not applicable.
PART II
Item 5: Market for Registrant's Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities
Market Information
Our common stock is listed on the Nasdaq Global Market under the symbol “FORM.” As of February 14, 2022, there were 123 registered holders of record of our common stock.
Dividends
No cash dividends have been declared on shares of our common stock, and the Company currently does not intend to pay dividends in the future.
Repurchase of Common Stock
In October 2020, our Board of Directors authorized a program to repurchase up to $50.0 million of outstanding common stock to offset potential dilution from issuances of our common stock under our employee stock purchase plan and equity incentive plan. Under the authorized stock repurchase program, we may repurchase shares from time to time on the open market. The pace of repurchase activity will depend on levels of cash generation, the Company's current stock price and other factors. The program may be modified or discontinued at any time. The share repurchase program will expire on October 28, 2022.
The following table provides information as of December 25, 2021 with respect to the shares of common stock repurchased during the fourth quarter of fiscal 2021 pursuant to the foregoing Board authorization.
Period (fiscal months)
Total Number of Shares Purchased
Average Price Paid per Share
Total Number of Shares Purchased as Part of Publicly Announced Plans or Programs
Maximum Amount that May Yet Be Purchased Under the Plans or Programs
September 26, 2021 - October 23, 2021
200
$
33.00
200
$
26,042,818
October 24, 2021 - November 20, 2021
—
—
—
26,042,818
November 21, 2021 - December 25, 2021
2,000
40.00
2,000
25,962,818
2,200
$
39.36
2,200
25,962,818
23
Stock Price Performance Graph
The following graph shows the total stockholder return of an investment of $100 in cash on December 31, 2016 through December 25, 2021 for (1) our common stock, (2) the S&P 500 Index and (3) the RDG Semiconductor Composite Index. All values assume reinvestment of the full amount of all dividends. Stockholder returns over the indicated period are based on historical data and are not necessarily indicative of future stockholder returns.
COMPARISON OF 5 YEAR CUMULATIVE TOTAL RETURN*
Among FormFactor, Inc., the S&P 500 Index, and the RDG Semiconductor Composite Index
*$100 invested on December 31, 2016 in stock or index, including reinvestment of dividends.
Cumulative Total Return
December 31, 2016
December 30, 2017
December 29, 2018
December 28, 2019
December 26, 2020
December 25, 2021
FormFactor, Inc.
$
100.00
$
139.73
$
125.09
$
232.50
$
380.18
$
397.41
S&P 500
100.00
121.83
116.49
153.17
181.35
233.41
RDG Semiconductor Composite
100.00
135.72
126.17
186.57
271.57
413.36
Item 6: [Reserved]
Item 7: Management's Discussion and Analysis of Financial Condition and Results of Operations
The following discussion and analysis of our financial condition and results of operations should be read in conjunction with our consolidated financial statements and the related notes included elsewhere in this Annual Report on Form 10-K. In addition to historical consolidated financial information, the following discussion and analysis contains forward-looking statements that involve risks, uncertainties and assumptions as described under the “Note Regarding Forward-Looking Statements” that appears earlier in this Annual Report on Form 10-K. Our actual results could differ materially from those
24
anticipated by these forward-looking statements as a result of many factors, including those discussed under “Item 1A: Risk Factors” and elsewhere in this Annual Report on Form 10-K.
Overview
FormFactor, Inc., headquartered in Livermore, California, is a leading provider of essential test and measurement technologies along the full semiconductor product lifecycle - from characterization, modeling, reliability, and design de-bug, to qualification and production test. We provide a broad range of high-performance probe cards, analytical probes, probe stations, metrology systems, thermal systems, and cryogenic systems to both semiconductor companies and scientific institutions. Our products provide electrical and physical information from a variety of semiconductor and electro-optical devices and integrated circuits from early research, through development, to high-volume production. Customers use our products and services to accelerate profitability by optimizing device performance and advancing yield knowledge.
We operate in two reportable segments consisting of the Probe Cards segment and the Systems segment. Sales of our probe cards and analytical probes are included in the Probe Cards segment, while sales of our probe stations, metrology systems, thermal systems and cryogenic systems are included in the Systems segment.
We generated net income of $83.9 million in fiscal 2021 compared to net income of $78.5 million in fiscal 2020 and net income of $39.3 million in fiscal 2019. The increase in net income in fiscal 2021 compared to fiscal 2020 was primarily due to increased revenue in both of our reportable segments, partially offset by slightly lower margins driven primarily by product mix and a higher tax rate due to significant one-time tax benefits during fiscal 2020 that did not recur. The increase in net income in fiscal 2020 compared to fiscal 2019 was primarily due to increased revenue and leverage on operating expenses, which only marginally increased on significantly higher operating levels, as well as a decrease in provision for income taxes due to a lower effective tax rate in fiscal 2020.
Impact of COVID-19
The COVID-19 pandemic continues to cause serious illness and death in many of the regions that we, our customers and our suppliers operate. The COVID-19 pandemic has resulted in significant governmental actions designed to control the spread of the virus, including the imposition of safety requirements and other orders in locations where we have manufacturing and other activities.
We continue to operate our manufacturing sites at production levels greater than those prior to the pandemic, albeit subject to certain safety and related constraints. Our other operations are continuing with substantial work-from-home activities.
If the provisions of governmental health orders or other safety requirements applicable to us or our customers or suppliers become more restrictive for an extended period of time, or if we have repeated occurrences of COVID-19 in any of our facilities, we may experience disruptions or delays in manufacturing, product design, product development, customer support, manufacturing and sales, and an overall loss of productivity and efficiency.
While the disruptions in our operations, supply chain and customer demand as a result of the COVID-19 pandemic have been somewhat limited, we continue to see impacts on elements in the supply chain and believe that the COVID-19 pandemic represents a sustained threat that may give rise to a variety of more significant adverse impacts on our business and financial results. The semiconductor industry is experiencing various supply constraints due to the pandemic. While we are working with our global supply chain partners to mitigate this risk, the duration and extent of the supply chain disruptions remain uncertain. For a further description of the uncertainties and business risks associated with the COVID-19 pandemic, see Part I, Item 1A, “Risk Factors” in this Annual Report on Form 10-K.
Fiscal Year
We operate on a 52/53 week fiscal year, whereby the fiscal year ends on the last Saturday of December. The fiscal years ended December 25, 2021, December 26, 2020 and December 28, 2019 each included 52 weeks.
Use of Estimates
Preparation of our financial statements requires management to make estimates and assumptions that affect the reported amounts of assets, liabilities, revenues and expenses. Management bases its estimates on historical experience and on various other assumptions that it believes to be reasonable under the circumstances, the results of which form the basis for making
25
judgments about the carrying values of assets and liabilities that are not readily apparent from other sources. Actual results may differ from these estimates under different assumptions or conditions.
Critical Accounting Policies
Our discussion and analysis of our financial condition and results of operations are based upon our consolidated financial statements, which have been prepared in accordance with generally accepted accounting principles (“GAAP”). The preparation of these financial statements requires us to make estimates and assumptions that affect the reported amounts of assets and liabilities at the date of the financial statements and the reported amounts of net revenue and expenses in the reporting period. Our accounting policies are fundamental to understanding our financial condition and results of operations reported in our financial statements and related disclosures. We have identified the following accounting policies as being critical because they require our management to make particularly difficult, subjective and/or complex judgments about the effect of matters that are inherently uncertain. Our management has discussed the development, selection, application and disclosure of these critical accounting policies with the Audit Committee of our Board of Directors.
Inventory Valuation
We state our inventories at the lower of cost (principally standard cost which approximates actual cost on a first in, first out basis) or net realizable value. We regularly assess the value of our inventory and will periodically write down its value for estimated excess inventory and product obsolescence based upon an analysis of existing inventory quantities compared to estimated future consumption. Future consumption is estimated based upon assumptions about how past consumption, recent purchases, backlog and other factors indicate future consumption. On a quarterly basis, we review existing inventory quantities in comparison to our past consumption, recent purchases, backlog and other factors to determine what inventory quantities, if any, may not be sellable. Based on this analysis, we record an adjustment to the cost basis of inventory when evidence exists that the net realizable value of inventory is lower than its cost, which occurs when we have excess and/or obsolete inventory.
At the point of loss recognition, a new, lower cost basis for that inventory is established, and subsequent changes in facts and circumstances do not result in the restoration or increase in that newly established cost basis. Market conditions are subject to change, and demand for our products can fluctuate significantly. Actual consumption of inventories could differ from forecasted demand, and this difference could have a material impact on our gross profit and inventory balances based on additional provisions for excess or obsolete inventories or a benefit from the sale of inventories previously written down.
Revenue Recognition
Revenue is recognized upon transferring control of products and services, and the amounts recognized reflect the consideration we expect to be entitled to receive in exchange for these products and services. An arrangement may include some or all of the following products and services: probe cards, systems, accessories, installation services, service contracts and extended warranty contracts.
A performance obligation is a promise in a contract to transfer a distinct good or service to the customer. In contracts with multiple performance obligations, we identify each performance obligation and evaluate whether the performance obligation is distinct within the context of the contract at contract inception. Performance obligations that are not distinct at contract inception are combined and accounted for as one unit of account. Generally, the performance obligations in a contract are considered distinct within the context of the contract and are accounted for as separate units of account.
Our products may be customized to our customers’ specifications, however, control of our product is typically transferred to the customer at the point in time the product is either shipped or delivered, depending on the terms of the arrangement, as the criteria for over time recognition is not met. In limited circumstances, substantive acceptance by the customer exists which results in the deferral of revenue until acceptance is formally received from the customer. Judgment may be required in determining if the acceptance clause is substantive. In certain instances control of products is transferred to the customer over time based on performance and in those instances we utilize an appropriate input or output measure to determine to what extent control has transferred to the customer. Judgment may be required in determining an appropriate measure of performance.
Installation services are routinely provided to customers purchasing our systems. Installation services are a distinct performance obligation apart from the systems and recognized in the period they are performed. Service contracts, which include repair and maintenance service contracts, and extended warranty contracts are also distinct performance obligations and recognized over the contractual service period, which ranges from one to three years. For these service contracts recognized over time, we use an input measure, days elapsed, to measure progress.
A contract’s transaction price is allocated to each distinct performance obligation and recognized as revenue when, or as, the performance obligation is satisfied. In determining the transaction price, we evaluate whether the price is subject to refund or
26
adjustment to determine the net consideration to which we expect to be entitled. We generally do not grant return privileges, except for defective products during the warranty period. Sales incentives and other programs that we may make available to our customers are considered to be a form of variable consideration, which is estimated in determining the contract’s transaction price to be allocated to the performance obligations.
For contracts with multiple performance obligations, we allocate the contract’s transaction price to each performance obligation based on its relative stand-alone selling price. The stand-alone selling prices are determined based on observable prices, which are the prices at which we separately sell these products. For items which do not have observable prices, we use our best estimate of the stand-alone selling prices.
We account for tax assessed by a governmental authority that is directly imposed on a revenue-producing transaction (i.e., sales, use, value added) on a net (excluded from revenue) basis.
Results of Operations
In this section, we discuss the results of our operations for the year ended December 25, 2021 compared to the year ended December 26, 2020. For a discussion of the year ended December 26, 2020 compared to the year ended December 28, 2019, please refer to Part II, Item 7, “Management's Discussion and Analysis of Financial Condition and Results of Operations” in our Annual Report on Form 10-K for the year ended December 26, 2020.
The following table sets forth our operating results as a percentage of revenues:
Fiscal 2021
Fiscal 2020
Fiscal 2019
Revenues
100.0
%
100.0
%
100.0
%
Cost of revenues
58.1
58.5
59.7
Gross profit
41.9
41.5
40.3
Operating expenses:
Research and development
13.1
12.8
13.8
Selling, general and administrative
16.1
16.6
18.0
Total operating expenses
29.2
29.4
31.8
Operating income
12.7
12.1
8.5
Interest income
0.1
0.2
0.5
Interest expense
(0.1)
(0.1)
(0.3)
Other income, net
0.1
0.1
*
Income before income taxes
12.8
12.3
8.7
Provision for income taxes
1.9
1.0
2.0
Net income
10.9
%
11.3
%
6.7
%
* Amounts insignificant and not greater than 0.1%.
Revenues by Segment
Fiscal 2021
Fiscal 2020
Fiscal 2019
(In thousands)
Probe Cards
$
633,281
$
581,739
$
491,363
Systems
136,393
111,877
98,101
Total
$
769,674
$
693,616
$
589,464
27
Revenues by Market
Fiscal
% of
Fiscal
% of
Change
2021
Revenues
2020
Revenues
$
%
(In thousands, except percentages)
Probe Cards Markets:
Foundry & Logic
$
435,812
56.6
%
$
446,183
64.3
%
$
(10,371)
(2.3)
%
DRAM
156,049
20.3
109,734
15.8
46,315
42.2
Flash
41,420
5.4
25,822
3.7
15,598
60.4
Systems Market:
Systems
136,393
17.7
111,877
16.2
24,516
21.9
Total revenues
$
769,674
100.0
%
$
693,616
100.0
%
$
76,058
11.0
%
Fiscal
% of
Fiscal
% of
Change
2020
Revenues
2019
Revenues
$
%
(In thousands, except percentages)
Probe Cards Markets:
Foundry & Logic
$
446,183
64.3
%
$
318,552
54.0
%
$
127,631
40.1
%
DRAM
109,734
15.8
147,257
25.0
(37,523)
(25.5)
Flash
25,822
3.7
25,554
4.3
268
1.0
Systems Market:
Systems
111,877
16.2
98,101
16.7
13,776
14.0
Total revenues
$
693,616
100.0
%
$
589,464
100.0
%
$
104,152
17.7
%
The decrease in Foundry & Logic product revenue in fiscal 2021 compared to fiscal 2020 was driven by lower demand from two major customers, partially offset by increased unit sales to other large semiconductor foundries and integrated device manufacturers. Our ability to significantly grow our overall revenue, despite these fluctuations, is the result of our long-term customer and market diversification initiatives.
The increase in DRAM product revenues in fiscal 2021 compared to fiscal 2020 was driven by increased sales to several customers and strong market-based demand for DRAM products through fiscal 2021. While we expect DRAM revenues to fluctuate from period to period, we believe new-design activity will continue to sustain healthy DRAM demand from each of our customers throughout fiscal 2022.
The increase in Flash product revenue in fiscal 2021 compared to fiscal 2020 was driven by increased sales resulting from the acquisition of the probe card assets of Advantest Corporation (“Baldwin Park”), offset by decreased sales as a result of decreased customer demand for our existing products. Our revenue in this market continues to be highly variable.
The increase in Systems product revenue in fiscal 2021 compared to fiscal 2020 was driven by increased sales of cryogenic systems due to the acquisition of High Precision Devices, Inc. (“HPD”) and increased sales of thermal sub-systems and metrology systems.
28
Revenues by Geographic Region
Fiscal 2021
% of Revenues
Fiscal 2020
% of Revenues
Fiscal 2019
% of Revenues
(In thousands, except percentages)
Taiwan
$
185,925
24.2
%
$
150,837
21.7
%
$
86,539
14.7
%
China
163,069
21.2
174,915
25.2
106,256
18.0
South Korea
123,463
16.0
86,951
12.5
116,882
19.8
United States
122,147
15.9
127,628
18.4
155,202
26.3
Asia-Pacific (1)
88,550
11.5
32,991
4.8
21,468
3.7
Europe
43,705
5.7
65,572
9.5
41,473
7.0
Japan
36,504
4.7
43,605
6.3
52,584
8.9
Rest of World
6,311
0.8
11,117
1.6
9,060
1.6
Total Revenues
$
769,674
100.0
%
$
693,616
100.0
%
$
589,464
100.0
%
(1) Asia-Pacific includes all countries in the region except Taiwan, South Korea, China and Japan, which are disclosed separately.
Geographic revenue information is based on the location to which we ship the product. For example, if a certain South Korean customer purchases through their U.S. subsidiary and requests the products to be shipped to an address in South Korea, this sale will be reflected in the revenue for South Korea rather than U.S.
Changes in revenue by geographic region in fiscal 2021 compared to fiscal 2020 were primarily attributable to changes in customer demand, shifts in customer regional manufacturing strategies, particularly with our large multinational customers, and product sales mix.
Cost of Revenues and Gross Margins
Cost of revenues consists primarily of manufacturing materials, compensation and benefits, shipping and handling costs, manufacturing-related overhead and amortization of certain intangible assets. Our manufacturing operations rely on a limited number of suppliers to provide key components and materials for our products, some of which are a sole source. We order materials and supplies based on backlog and forecasted customer orders. Tooling and setup costs related to changing manufacturing lots at our suppliers are also included in the cost of revenues. We expense all warranty costs, inventory provisions and amortization of certain intangible assets as cost of revenues.
Gross profit and gross margin by segment were as follows (dollars in thousands):
Fiscal 2021
Probe Cards
Systems
Corporate and Other
Total
Gross profit
$
279,873
$
65,834
$
(22,940)
$
322,767
Gross margin
44.2
%
48.3
%
—
%
41.9
%
Fiscal 2020
Probe Cards
Systems
Corporate and Other
Total
Gross profit
$
263,215
$
51,835
$
(27,130)
$
287,920
Gross margin
45.2
%
46.3
%
—
%
41.5
%
Fiscal 2019
Probe Cards
Systems
Corporate and Other
Total
Gross profit
$
211,382
$
50,927
$
(24,813)
$
237,496
Gross margin
43.0
%
51.9
%
—
%
40.3
%
Probe Cards
Gross profit in the Probe Cards segment increased in fiscal 2021 compared to fiscal 2020, primarily due to higher revenues. Gross margin in the Probe Cards segment decreased in fiscal 2021 compared to fiscal 2020, primarily due to product mix within and between our served markets, including the effects of increased DRAM revenues at gross margin levels lower than fiscal
29
2020, unfavorable manufacturing variances, higher material costs driven by fluctuations in commodity costs, and increases in wafer expense primarily due to timing of factory loading, partially offset by higher gross margin Foundry & Logic revenues.
Systems
Gross profit and gross margin in the Systems segment increased in fiscal 2021 compared to fiscal 2020, primarily as a result of higher revenues and favorable product mix, largely related to increased sales of metrology systems and thermal sub-systems.
Corporate and Other
Corporate and Other includes unallocated expenses relating to amortization of intangible assets, inventory and fixed asset fair value adjustments due to acquisitions, share-based compensation, and restructuring charges, net, which are not used in evaluating the results of, or in allocating resources to, our reportable segments. The reduction in Corporate and Other in fiscal 2021 compared to fiscal 2020, is primarily due to a reduction in the amortization of intangibles from significant intangibles becoming fully amortized, partially offset by increased stock-based compensation expense.
Overall
Gross profit and gross margin fluctuate with revenue levels, product mix, selling prices, factory loading and material costs. For fiscal 2021 compared to fiscal 2020, gross profit has increased on greater revenue levels and gross margins increased due to the reduction in the amortization of intangibles, partially offset by lower blended gross margins due to product mix.
Stock-based compensation expense included in cost of revenues for fiscal 2021 and 2020 was $5.2 million and $4.0 million, respectively.
Research and Development
Fiscal Year Ended
December 25, 2021
December 26, 2020
$ Change
% Change
(Dollars in thousands)
Research and development
$
100,937
$
89,034
$
11,903
13.4
%
% of revenues
13.1
%
12.8
%
Fiscal Year Ended
December 26, 2020
December 28, 2019
$ Change
% Change
(Dollars in thousands)
Research and development
$
89,034
$
81,499
$
7,535
9.2
%
% of revenues
12.8
%
13.8
%
The increase in research and development expenses in fiscal 2021 compared to fiscal 2020 was primarily driven by our acquisitions of Baldwin Park and HPD during the third and fourth quarters of fiscal 2020, respectively, which increased headcount and general operational costs. Annual salary increases, higher stock-based compensation, and restructuring charges also contributed to the increase. The components of this increase were as follows (in thousands):
Fiscal 2021 compared to Fiscal 2020
Employee compensation costs
$
5,697
General operating expenses
3,259
Stock-based compensation
1,759
Restructure
869
Depreciation
181
Project material costs
138
$
11,903
Stock-based compensation expense included within research and development in fiscal 2021 and 2020 was $7.6 million and $5.8 million, respectively.
30
Selling, General and Administrative
Fiscal Year Ended
December 25, 2021
December 26, 2020
$ Change
% Change
(Dollars in thousands)
Selling, general and administrative
$
123,792
$
115,098
$
8,694
7.6
%
% of revenues
16.1
%
16.6
%
Fiscal Year Ended
December 26, 2020
December 28, 2019
$ Change
% Change
(Dollars in thousands)
Selling, general and administrative
$
115,098
$
106,335
$
8,763
8.2
%
% of revenues
16.6
%
18.0
%
The increase in selling, general and administrative expenses in fiscal 2021 compared to fiscal 2020 was primarily driven by our acquisitions of Baldwin Park and HPD during the third and fourth quarter of fiscal 2020, respectively, which increased headcount and general operational costs. Annual salary increases, higher stock-based compensation, and the benefit in the prior year related to adjustments to contingent consideration for the acquisition of FRT GmbH (“FRT”) that did not repeat also contributed to the increases. These increases were partially offset by decreased consulting fees for information technology security remediation costs incurred in fiscal 2020 that did not repeat in fiscal 2021.
The components of this overall increase were as follows (in thousands):
Fiscal 2021 compared to Fiscal 2020
Employee compensation
$
5,832
Gain on contingent consideration
2,784
Stock-based compensation
2,546
General operating expenses
1,537
Consulting fees
(4,005)
$
8,694
Stock-based compensation expense included within selling, general and administrative in fiscal 2021 and 2020 was $16.6 million, and $14.1 million, respectively.
Interest Income and Interest Expense
Fiscal Year Ended
December 25, 2021
December 26, 2020
December 28, 2019
(Dollars in thousands)
Interest income
$
569
$
1,501
$
2,714
Weighted average balance of cash and investments
265,248
230,310
179,526
Weighted average yield on cash and investments
0.29
%
0.90
%
2.05
%
Interest expense
$
602
$
864
$
1,915
Average debt outstanding
16,304
37,563
56,776
Weighted average interest rate on debt
1.42
%
1.94
%
4.09
%
31
Interest income is earned on our cash, cash equivalents, restricted cash and marketable securities. The decrease in interest income in fiscal 2021 compared to fiscal 2020 was attributable to lower investment yields due to the low interest rate environment, despite higher invested balances.
Interest expense primarily includes interest on our term loans, interest rate swap derivative contracts, and term loan issuance costs amortization charges. The decrease in interest expense in fiscal 2021 compared to fiscal 2020 was primarily due to lower outstanding debt balances driven primarily by the pay-off of one of our term loans on June 30, 2020.
Other income, net
Other income, net primarily includes the effects of foreign currency impact and various other gains and losses.
Provision for income taxes
Fiscal Year Ended
December 25, 2021
December 26, 2020
December 28, 2019
(Dollars in thousands)
Provision for income taxes
$
14,576
$
6,652
$
11,717
Effective tax rate
14.8
%
7.8
%
22.9
%
Provision for income taxes reflects the tax provision on our operations in foreign and U.S. jurisdictions, offset by tax benefits from tax credits and the foreign-derived intangible income (“FDII”) deduction. Our effective tax rate may vary based on changes in estimated taxable income or loss by jurisdiction, changes to the valuation allowance, changes to U.S. federal, state or foreign tax laws, changes in ASC 718 stock-based compensation expense/benefit, future expansion into areas with varying country, state, and local income tax rates, and deductibility of certain costs and expenses by jurisdiction.
We have utilized our previous net operating loss carryforwards in fiscal 2021, and expect the FDII deduction and corresponding benefit to be available, resulting in a decrease from the U.S. statutory rate and included in our worldwide effective tax rate for the year ended December 25, 2021. In fiscal 2020, the U.S. Department of Treasury and the Internal Revenue Service finalized regulations T.D. 9902 with respect to the global intangible low-taxes income high-tax exemption, resulting in a decrease in our effective tax rate. This adjustment was retroactive to the fiscal years 2018 and 2019 and the cumulative impact was taken into account during fiscal 2020, which provided a significant one-time tax benefit in fiscal 2020.
Liquidity and Capital Resources
Capital Resources
Our working capital increased to $375.3 million at December 25, 2021 compared to $332.5 million at December 26, 2020, primarily due to higher cash, cash equivalents and marketable securities, net, from cash generated from operations, higher inventories and accounts receivable on higher operating levels, and lower accounts payable and accrued liabilities from timing of payments, partially offset by higher deferred revenue and operating lease liabilities.
Cash and cash equivalents primarily consist of deposits held at banks, money market funds, and U.S. agency securities. Marketable securities primarily consist of U.S. treasuries, corporate bonds and commercial paper. We typically invest in highly-rated securities with low probabilities of default. Our investment policy requires investments to be rated single A or better, and limits the types of acceptable investments, issuer concentration and duration of the investment.
Our cash, cash equivalents and marketable securities totaled approximately $276.1 million at December 25, 2021 compared to $255.0 million at December 26, 2020. Based on our historical results of operations, we expect that our cash, cash equivalents, and marketable securities on hand, and the cash we expect to generate from operations, will be sufficient to fund our short-term and long-term liquidity requirements primarily arising from: research and development, capital expenditures, working capital, outstanding commitments, and other liquidity requirements associated with existing operations. However, we cannot be certain that our cash, cash equivalents, and marketable securities on hand, and cash generated from operations, will be available in the future to fund all of our capital and operating requirements. In addition, any future strategic investments and significant acquisitions may require additional cash and capital resources. To the extent necessary, we may consider entering into short and long-term debt obligations, raising cash through a stock issuance, or obtaining new financing facilities, which may not be available on terms favorable to us. If we are unable to obtain sufficient cash or capital to meet our needs on a timely basis and on favorable terms, our business and operations could be materially and adversely affected.
32
The COVID-19 pandemic has negatively impacted the global economy, disrupted global supply chains and created significant volatility and disruption of financial markets. An extended period of global supply chain and economic disruption could materially affect our business, results of operations, access to sources of liquidity and financial condition.
If we are unsuccessful in maintaining or growing our revenues, maintaining or reducing our cost structure (in response to a potential reduction in demand due to an industry downturn, COVID-19, or other event), or increasing our available cash through debt or equity financings, our cash, cash equivalents and marketable securities may decline.
We utilize a variety of tax planning and financing strategies in an effort to manage our worldwide cash and deploy funds to locations where they are needed. As part of these strategies, we indefinitely reinvest a portion of our foreign earnings. Should we require additional capital in the U.S., we may elect to repatriate indefinitely-reinvested foreign funds or raise capital in the United States.
Cash Flows
Fiscal Year Ended
December 25, 2021
December 26, 2020
December 28, 2019
(Dollars in thousands)
Net cash provided by operating activities
$
139,364
$
169,256
$
121,048
Net cash used in investing activities
(124,741)
(98,922)
(66,352)
Net cash used in financing activities
(47,199)
(30,935)
(6,578)
Operating Activities
Cash provided by operating activities consists of net income for the period adjusted for certain non-cash items and changes in certain operating assets and liabilities. The $29.9 million decrease in cash provided by operating activities for fiscal 2021, as compared to fiscal 2020, was primarily related to increased investment in working capital to support higher operating levels.
Net cash provided by operating activities in fiscal 2021 was primarily attributable to net income of $83.9 million, which included $105.2 million of net non-cash items, offset by changes in operating assets and liabilities using $49.8 million of cash as discussed in more detail below.
Accounts receivable increased $7.9 million to $115.5 million at December 25, 2021 compared to $107.6 million at December 26, 2020, as a result of higher operating levels and timing of customer payments.
Inventories, net, increased $12.3 million to $111.5 million at December 25, 2021 compared to $99.2 million at December 26, 2020, as a result of higher operating levels.
Accounts payable and accrued liabilities decreased $8.7 million to $108.7 million at December 25, 2021 compared to $117.4 million at December 26, 2020, as a result of the timing of payments and decreases in accrued warranty, partially offset by higher operating levels and increases in accrued taxes.
Operating lease liabilities increased $4.2 million to $38.9 million at December 25, 2021, compared to $34.7 million at December 26, 2020, as a result of additional right-of-use assets obtained in exchange for lease obligations of $7.2 million, offset by lease payments.
Investing Activities
Net cash used in investing activities in fiscal 2021 primarily related to $66.5 million of cash used in the acquisition of property, plant and equipment, and $58.2 million used for the purchase of marketable securities, net of maturities.
Financing Activities
Net cash used in financing activities in fiscal 2021 primarily related to $24.0 million used to purchase common stock under our stock repurchase program, $20.6 million used to pay tax withholdings for net share settlements of employee equity awards, and $9.3 million of principal payments made towards the repayment of our term loans, partially offset by $10.7 million of proceeds received from issuances of common stock under our stock incentive plans.
33
Debt
CMI Term Loan
On June 24, 2016, we entered into a Credit Agreement (the “Credit Agreement”) with HSBC Bank USA, National Association (“HSBC”), as administrative agent, co-lead arranger, sole bookrunner and syndication agent, other lenders that may from time-to-time be a party to the Credit Agreement, and certain guarantors. Pursuant to the Credit Agreement, the lenders provided us with a senior secured term loan facility of $150 million (the “CMI Term Loan”). The proceeds of the CMI Term Loan were used to finance a portion of the purchase price paid in connection with the Cascade Microtech acquisition in fiscal 2016 and to pay related bank fees and expenses.
The CMI Term Loan bore interest at a rate equal to, at our option, (i) the applicable London Interbank Offered Rate (“LIBOR”) rate plus 2.00% per annum or (ii) Base Rate (as defined in the Credit Agreement) plus 1.00% per annum. We elected to pay interest at 2.00% over the one-month LIBOR rate. Interest payments were payable in quarterly installments over a five-year period.
The principal payments on the CMI Term Loan were scheduled to be paid in equal quarterly installments that began June 30, 2016, in an annual amount equal to 5% for year one, 10% for year two, 20% for year three, 30% for year four and 35% for year five. We accelerated payments of these scheduled amounts and made the final payment on the CMI Term Loan on June 30, 2020, approximately one year before the original maturity. We are no longer subject to the terms of the Credit Agreement.
FRT Term Loan
On October 25, 2019, we entered into a euro denominated $23.4 million, three-year credit facility loan agreement (the “FRT Term Loan”) with HSBC Trinkaus & Burkhardt AG, Germany, to fund the acquisition of FRT GmbH, which we acquired on October 9, 2019.
The FRT Term Loan bears interest at a rate equal to the Euro Interbank Offered Rate (“EURIBOR”) plus 1.75 % per annum and will be repaid in quarterly installments of approximately $2.0 million plus interest. The interest rate at December 25, 2021 was 1.20%.
The obligations under the FRT Term Loan are fully and unconditionally guaranteed by FormFactor, Inc. The FRT Term Loan contains negative covenants customary for financing of this type, including covenants that place limitations on the incurrence of additional indebtedness, the creation of liens, the payment of dividends; dispositions; fundamental changes, including mergers and acquisitions; loans and investments; sale leasebacks; negative pledges; transactions with affiliates; changes in fiscal year; sanctions and anti-bribery laws and regulations, and modifications to charter documents in a manner materially adverse to the Lenders. The FRT Term Loan also contains affirmative covenants and representations and warranties customary for financing of this type. As of December 25, 2021, the balance outstanding pursuant to the FRT term loan was $7.9 million, and we were in compliance with all covenants.
Building Term Loan
On June 22, 2020, we entered into an $18.0 million 15-year credit facility loan agreement (the “Building Term Loan”) with MUFG Union Bank, National Association (“Union Bank”). The proceeds of the Building Term Loan were used to purchase a building adjacent to our leased facilities in Livermore, California.
The Building Term Loan bears interest at a rate equal to the applicable LIBOR rate plus 1.75% per annum. Interest payments are payable in monthly installments over a fifteen-year period. The interest rate at December 25, 2021 was 1.85%.
On March 17, 2020, we entered into an interest rate swap agreement with Union Bank to hedge the interest payments on the Building Term Loan for the notional amount of $18.0 million. As future levels of LIBOR over the life of the loan are uncertain, we entered into this interest-rate swap agreement to hedge the exposure in interest rate risks associated with movement in LIBOR rates. By entering into the agreement, we convert a floating rate interest at one-month LIBOR plus 1.75% into a fixed rate interest at 2.75%. The interest rate swap included a 0% floor that was effective for one year from the date of the swap. As of December 25, 2021, the notional amount of the loan that is subject to this interest rate swap is $16.5 million.
The obligations under the Building Term Loan are guaranteed by a deed of trust covering certain real property and improvements and certain personal property used in connection therewith. The deed of trust creates a first priority lien or encumbrance on the property with only such exceptions as may be approved by the Union Bank in writing.
34
The Credit Agreement contains covenants customary for financing of this type. As of December 25, 2021, the balance outstanding pursuant to the Building Term Loan was $16.5 million, and we were in compliance with all covenants under the Credit Agreement.
Stock Repurchase Program
In October 2020, our Board of Directors authorized a program to repurchase up to $50 million of outstanding common stock to offset potential dilution from issuances of common stock under our stock-based incentive plans. The share repurchase program will expire October 28, 2022. This repurchase program replaced the previous repurchase program that expired in February 2020 to purchase up to $25.0 million of outstanding common stock. During fiscal 2021, we repurchased 622,400 shares of common stock for $24.0 million, and, as of December 25, 2021, $26.0 million remained available for future repurchases. There was no stock repurchased in fiscal 2020 or 2019.
Contractual Obligations and Commitments
The following table summarizes our significant contractual commitments to make future payments in cash under contractual obligations as of December 25, 2021 (in thousands):
Payments Due In Fiscal Year
2022
2023
2024
2025
2026
2027 and thereafter
Total
Operating leases
$
8,594
$
7,232
$
6,814
$
6,799
$
6,008
$
8,970
$
44,417
Term loans - principal payments
8,935
1,050
1,080
1,111
1,142
11,117
24,435
Term loans - interest payments(1)
361
282
263
240
220
930
2,296
Total
$
17,890
$
8,564
$
8,157
$
8,150
$
7,370
$
21,017
$
71,148
(1) Represents our minimum interest payment commitments at 1.20% per annum for the FRT Term Loan and 1.85% per annum for the Building Term Loan.
The table above excludes our gross liability for unrecognized tax benefits, which totaled $35.7 million as of December 25, 2021. The timing of any payments which could result from these unrecognized tax benefits will depend upon a number of factors and, accordingly, the timing of payment cannot be estimated.
Indemnification Agreements
We have entered, and may from time to time in the ordinary course of our business enter, into contractual arrangements with third parties that include indemnification obligations. Under these contractual arrangements, we have agreed to defend, indemnify and/or hold the third party harmless from and against certain liabilities. These arrangements include indemnities in favor of customers in the event that our products or services infringe a third party's intellectual property or cause property or other indemnities in favor of our lessors in connection with facility leasehold liabilities that we may cause. In addition, we have entered into indemnification agreements with our directors and certain of our officers, and our bylaws contain indemnification obligations in favor of our directors, officers and agents. These indemnity arrangements may limit the type of the claim, the total amount that we can be required to pay in connection with the indemnification obligation and the time within which an indemnification claim can be made. The duration of the indemnification obligation may vary, and for most arrangements, survives the agreement term and is indefinite. We believe that substantially all of our indemnity arrangements provide either for limitations on the maximum potential future payments we could be obligated to make, or for limitations on the types of claims and damages we could be obligated to indemnify, or both. However, it is not possible to determine or reasonably estimate the maximum potential amount of future payments under these indemnification obligations due to the varying terms of such obligations, a lack of history of prior indemnification claims, the unique facts and circumstances involved in each particular contractual arrangement and in each potential future claim for indemnification, and the contingency of any potential liabilities upon the occurrence of events that are not reasonably determinable. We have not had any material requests for indemnification under these arrangements. We have not recorded any liabilities for these indemnification arrangements on our Consolidated Balance Sheets as of December 25, 2021 or December 26, 2020.
New Accounting Pronouncements
See Note 17, New Accounting Pronouncements, of Notes to Consolidated Financial Statements.
35
Item 7A: Quantitative and Qualitative Disclosures about Market Risk
Foreign Currency Exchange Risk
We conduct certain operations in foreign currencies. We enter into currency forward exchange contracts to hedge a portion, but not all, of existing foreign currency denominated amounts. Gains and losses on these contracts are generally recognized in Other income, net in our Consolidated Statements of Income. Because the effect of movements in currency exchange rates on the currency forward exchange contracts generally offsets the related effect on the underlying items being hedged, these financial instruments are not expected to subject us to risks that would otherwise result from changes in currency exchange rates as of December 25, 2021. We do not use derivative financial instruments for trading or speculative purposes. We recognized a net gain from foreign exchange of zero and $0.5 million in fiscal 2021 and 2020, respectively, and a net loss of $0.4 million in fiscal 2019.
Interest Rate Sensitivity
Our exposure to market risk for changes in interest rates relates primarily to our investment portfolio. We invest in a number of securities including U.S. agency discount notes, money market funds and commercial paper. We attempt to maintain the safety and preservation of our invested principal funds by limiting default risk, market risk and reinvestment risk. We mitigate default risk by investing in high grade investment securities. By policy, we limit the amount of credit exposure to an issuer, except U.S. Treasuries and U.S. agencies.
Our exposure to interest rate risk arising from our Term Loans (see Note 5, Debt, of Notes to Consolidated Financial Statements) is insignificant as a result of the interest-rate swap agreement (see Note 8, Derivative Financial Instruments, of Notes to Consolidated Financial Statements) that we entered into with Union Bank to hedge the interest payments on our Building Term Loan.
We use interest rate derivative instruments to manage certain interest rate exposures. We do not use derivative instruments for trading or speculative purposes. The fair market value of our fixed rate securities may be adversely impacted by increases in interest rates while income earned on floating rate securities may decline as a result of decreases in interest rates. A hypothetical 100 basis-point (one percentage point) increase or decrease in interest rates compared to rates at December 25, 2021 and December 26, 2020 would have affected the fair value of our investment portfolio by $0.1 million and $0.1 million, respectively.
Item 8: Financial Statements and Supplementary Data
Consolidated Financial Statements
The consolidated financial statements and supplementary data required by this item are included in the section entitled “Consolidated Financial Statements” of this Annual Report on Form 10-K. See Item 15 for a list of our consolidated financial statements.
Item 9: Changes in and Disagreements with Accountants on Accounting and Financial Disclosure
None.
Item 9A: Controls and Procedures
Evaluation of Disclosure Controls and Procedures
Based on our management’s evaluation (with the participation of our principal executive officer and principal financial officer), as of the end of the period covered by this report, our principal executive officer and principal financial officer have concluded that our disclosure controls and procedures (as defined in Rules 13a-15(e) and 15d-15(e) under the Securities Exchange Act of 1934, as amended, (the “Exchange Act”)) were effective as of December 25, 2021 to ensure that information required to be disclosed by us in reports that we file or submit under the Exchange Act is recorded, processed, summarized and reported within the time periods specified in Securities and Exchange Commission rules and forms and is accumulated and communicated to our management, including our principal executive officer and principal financial officer, as appropriate to allow timely decisions regarding required disclosure.
36
Changes in Internal Control over Financial Reporting
There have been no changes in our internal control over financial reporting (as defined in Rules 13a-15(f) and 15d-15(f) under the Exchange Act) that occurred during the fourth quarter of fiscal 2021, that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.
Management's Report on Internal Control over Financial Reporting
Our management is responsible for establishing and maintaining adequate internal control over financial reporting as defined in Rules 13a-15(f) and 15d-15(f) under the Exchange Act. Internal control over financial reporting is a process designed by, or under the supervision of, our Principal Executive Officer and Principal Financial Officer, and effected by our board of directors, management and other personnel and consultants, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles, and includes those policies and procedures that:
(i) pertain to the maintenance of records that in reasonable detail accurately and fairly reflect our transactions and dispositions of assets;
(ii) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that our receipts and expenditures are being made only in accordance with the authorization of our management and directors; and
(iii) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use or disposition of our assets that could have a material effect on the financial statements.
Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.
Under the supervision and with the participation of our management, including our Principal Executive Officer and Principal Financial Officer, we conducted an assessment of the effectiveness of our internal control over financial reporting as of December 25, 2021. In making this assessment, our management used the criteria set forth in Internal Control-Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission (“COSO”). Based on the results of this assessment, management has concluded that our internal control over financial reporting was effective as of December 25, 2021.
The effectiveness of our internal control over financial reporting as of December 25, 2021 has been audited by KPMG LLP, an independent registered public accounting firm, as stated in their report which appears in this Annual Report on Form 10-K.
Limitations on the Effectiveness of Controls
Control systems, no matter how well designed and operated, can provide only reasonable, not absolute, assurance that the control systems’ objectives are being met. Further, the design of any control systems must reflect the fact that there are resource constraints, and the benefits of all controls must be considered relative to their costs. Because of the inherent limitations in all control systems, no evaluation of controls can provide absolute assurance that all control issues and instances of fraud, if any, within our company have been detected. These inherent limitations include the realities that judgments in decision making can be faulty and that breakdowns can occur because of simple error or mistake. Control systems can also be circumvented by the individual acts of some persons, by collusion of two or more people, or by management override of the controls. The design of any system of controls is based, in part, on certain assumptions about the likelihood of future events, and there can be no assurance that any design will succeed in achieving its stated goals under all potential future conditions. Over time, controls may become inadequate because of changes in conditions or deterioration in the degree of compliance with policies or procedures.
CEO and CFO Certifications
We have attached as exhibits to this Annual Report on Form 10-K the certifications of our Chief Executive Officer and Chief Financial Officer, which are required in accordance with the Exchange Act. We recommend that this Item 9A be read in conjunction with the certifications for a more complete understanding of the subject matter presented.
Item 9B: Other Information
None.
37
Item 9C: Disclosure Regarding Foreign Jurisdictions that Prevent Inspections
None.
38
PART III
Item 10: Directors, Executive Officers and Corporate Governance
The information required by this item is incorporated by reference to the proxy statement for our 2022 Annual Meeting of Stockholders under the captions Corporate Governance, Executive Officers, and, if applicable, Delinquent Section 16 Reports.
Item 11: Executive Compensation
The information required by this item is incorporated by reference to the proxy statement for our 2022 Annual Meeting of Stockholders under the captions Executive Compensation and Related Information, Compensation Committee Interlocks and Insider Participation and Report of the Compensation Committee.
Item 12: Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters
The information required by this item is incorporated by reference to the proxy statement for our 2022 Annual Meeting of Stockholders under the captions Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters, and Equity Compensation Plans.
Item 13: Certain Relationships and Related Transactions, and Director Independence
The information required by this item is incorporated by reference to the proxy statement for our 2022 Annual Meeting of Stockholders under the captions Certain Relationships and Related Transactions and Independence of Directors.
Item 14: Principal Accountant Fees and Services
Our independent registered public accounting firm is KPMG, LLP; Portland, Oregon; Auditor Firm ID: 185.
The information required by this item is incorporated by reference to the proxy statement for our 2022 Annual Meeting of Stockholders under the caption Principal Auditor Fees and Services.
39
PART IV
Item 15: Exhibits and Financial Statement Schedules
Financial Statements and Schedules
The Consolidated Financial Statements, together with the report thereon of KPMG LLP, are included on the pages indicated below:
Page
Report of Independent Registered Public Accounting Firm
Financial statement schedules have been omitted because they are not applicable or the required information is shown in the consolidated financial statements or notes thereto.
Exhibits
The exhibits listed in the accompanying index to exhibits are filed or incorporated by reference as part of this Annual Report on Form 10-K.
Pacific Corporate Center Lease (Building 1) by and between Greenville Holding Company LLC (successor to Greenville Investors, L.P.) (“Greenville”) and the Registrant dated May 3, 2001
Third Amendment, dated December 19, 2016, between FormFactor, Inc. and MOHR PCC, LP, to Pacific Corporate Center Leases (Buildings 1, 2 and 3), dated May 3, 2001, by and between Greenville Investors, L.P. and FormFactor, Inc., as amended
Pacific Corporate Center Lease by and between Greenville and the Registrant dated September 7, 2004, as amended by First Amendment to Building 6 Lease dated August 16, 2006
Second Amendment, dated December 19, 2016, between FormFactor, Inc. and MOHR PCC, LP, to Pacific Corporate Center Lease, dated October 5, 2004, by and between Greenville Investors, L.P. and FormFactor, Inc., as amended
Third Amendment, dated October 1, 2018, between FormFactor, Inc. and MOHR PCC, LP, to Pacific Corporate Center Lease, dated October 5, 2004, by and between Greenville Investors, L.P. and FormFactor, Inc., as amended
Fourth Amendment, dated October 1, 2018, between FormFactor, Inc. and MOHR PCC, LP, to Pacific Corporate Center Lease, dated October 5, 2004, by and between Greenville Investors, L.P. and FormFactor, Inc., as amended
First Amendment to Lease dated January 10, 2007, between Nimbus Center LLC (as successor in interest to Spieker Properties, L.P.) and Cascade Microtech, Inc.
Certification of Chief Executive Officer and Chief Financial Officer pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002
—
—
—
—
X
101**
The following financial statements from the Company’s Annual Report on Form 10-K for the year ended December 25, 2021, formatted in Inline XBRL: (i) Consolidated Balance Sheets, (ii) Consolidated Statements of Income, (iii) Consolidated Statements of Comprehensive Income, (iv) Consolidated Statements of Cash Flows, and (v) Notes to Consolidated Financial Statements, tagged as blocks of text and including detailed tags.
The cover page from the Company’s Annual Report on Form 10-K for the year ended December 25, 2021, formatted in Inline XBRL (included as Exhibit 101).
—
—
—
—
X
* This exhibit shall not be deemed “filed” for purposes of Section 18 of the Securities Exchange Act of 1934 or otherwise subject to the liabilities of that section, nor shall it be deemed incorporated by reference in any filing under the Securities Act of 1933 or the Securities Exchange Act of 1934, whether made before or after the date hereof and irrespective of any general incorporation language in any filings.
** Pursuant to Rule 406T of Regulation S-T, these interactive data files are deemed not filed or part of a registration statement or prospectus for purposes of Sections 11 or 12 of the Securities Act of 1933 or Section 18 of the Securities Exchange Act of 1934 and otherwise are not subject to liability.
*** The schedules, exhibits, and annexes to this exhibit have been omitted in reliance on Item 601(b)(2) of Regulation S-K and will be furnished supplementally to the SEC upon request.
+ Indicates a management contract or compensatory plan or arrangement.
42
SIGNATURES
Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the Registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.
FORMFACTOR, INC.
Date:
February 18, 2022
By:
/s/ SHAI SHAHAR
Shai Shahar
Chief Financial Officer
(Principal Financial Officer and Principal
Accounting Officer)
POWER OF ATTORNEY
KNOW BY ALL PERSONS BY THESE PRESENTS, that each of the undersigned whose signature appears below constitutes and appoints Shai Shahar and Christy Robertson, and each of them, the undersigned's true and lawful attorneys in-fact and agents with full power of substitution, for the undersigned and in the undersigned's name, place and stead, in any and all capacities, to sign any and all amendments to this Annual Report on Form 10-K and any other documents in connection therewith, and to file the same, with all exhibits thereto, with the Securities and Exchange Commission, granting unto said attorneys-in-fact and agents, and each of them, full power and authority to do and perform each and every act requisite and necessary to be done with respect to this Annual Report on Form 10-K, including amendments, as fully to all intents and purposes as the undersigned might or could do in person, hereby ratifying and confirming all that said attorneys-in-fact and agents, or his or their substitute or substitutes, may lawfully do or cause to be done by virtue hereof.
IN WITNESS WHEREOF, each of the undersigned has executed this Power of Attorney as of the date indicated below.
Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the Registrant and in the capacities and on the dates indicated.
Signature
Title
Date
Principal Executive Officer:
/s/ MICHAEL D. SLESSOR
President, Chief Executive Officer and Director
February 18, 2022
Michael D. Slessor
Principal Financial Officer and Principal Accounting Officer:
/s/ SHAI SHAHAR
Chief Financial Officer
February 18, 2022
Shai Shahar
43
Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the Registrant and in the capacities and on the dates indicated.
Signature
Title
Date
Additional Directors:
/s/ LOTHAR MAIER
Director
February 18, 2022
Lothar Maier
/s/ JORGE TITINGER
Director
February 18, 2022
Jorge Titinger
/s/ KELLEY STEVEN-WAISS
Director
February 18, 2022
Kelley Steven-Waiss
/s/ SHERI RHODES
Director
February 18, 2022
Sheri Rhodes
/s/ RAYMOND LINK
Director
February 18, 2022
Raymond Link
/s/ REBECA OBREGON-JIMENEZ
Director
February 18, 2022
Rebeca Obregon-Jimenez
/s/ THOMAS ST. DENNIS
Director
February 18, 2022
Thomas St. Dennis
44
Report of Independent Registered Public Accounting Firm
To the Stockholders and Board of Directors
FormFactor, Inc.:
Opinions on the Consolidated Financial Statements and Internal Control Over Financial Reporting
We have audited the accompanying consolidated balance sheets of FormFactor, Inc. and subsidiaries (the Company) as of December 25, 2021 and December 26, 2020, the related consolidated statements of income, comprehensive income, stockholders’ equity, and cash flows for each of the years in the three-year period ended December 25, 2021, and the related notes (collectively, the consolidated financial statements). We also have audited the Company’s internal control over financial reporting as of December 25, 2021, based on criteria established in Internal Control - Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission.
In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the financial position of the Company as of December 25, 2021 and December 26, 2020, and the results of its operations and its cash flows for each of the years in the three-year period ended December 25, 2021, in conformity with U.S. generally accepted accounting principles. Also in our opinion, the Company maintained, in all material respects, effective internal control over financial reporting as of December 25, 2021 based on the criteria established in Internal Control - Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission.
Basis for Opinions
The Company’s management is responsible for these consolidated financial statements, for maintaining effective internal control over financial reporting, and for its assessment of the effectiveness of internal control over financial reporting, included in the accompanying Management’s Report on Internal Control over Financial Reporting. Our responsibility is to express an opinion on the Company’s consolidated financial statements and an opinion on the Company’s internal control over financial reporting based on our audits. We are a public accounting firm registered with the Public Company Accounting Oversight Board (United States) (PCAOB) and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.
We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audits to obtain reasonable assurance about whether the consolidated financial statements are free of material misstatement, whether due to error or fraud, and whether effective internal control over financial reporting was maintained in all material respects.
Our audits of the consolidated financial statements included performing procedures to assess the risks of material misstatement of the consolidated financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the consolidated financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the consolidated financial statements. Our audit of internal control over financial reporting included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, and testing and evaluating the design and operating effectiveness of internal control based on the assessed risk. Our audits also included performing such other procedures as we considered necessary in the circumstances. We believe that our audits provide a reasonable basis for our opinions.
Definition and Limitations of Internal Control Over Financial Reporting
A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.
Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.
45
Critical Audit Matter
The critical audit matter communicated below is a matter arising from the current period audit of the consolidated financial statements that was communicated or required to be communicated to the audit committee and that: (1) relates to accounts or disclosures that are material to the consolidated financial statements and (2) involved our especially challenging, subjective, or complex judgments. The communication of a critical audit matter does not alter in any way our opinion on the consolidated financial statements, taken as a whole, and we are not, by communicating the critical audit matter below, providing a separate opinion on the critical audit matter or on the accounts or disclosures to which it relates.
Evaluation of inventory excess and obsolescence
As discussed in notes 2 and 3 to the consolidated financial statements, the Company’s net inventories were $111.5 million as of December 25, 2021, and inventory write-downs totaled $15.5 million for the year ended December 25, 2021. The Company states its inventories at the lower of cost or net realizable value. The Company records an adjustment to the cost basis of inventory when evidence exists that the net realizable value of inventory is lower than its cost, which occurs when the Company has excess and/or obsolete inventory. The Company’s model to estimate the excess and/or obsolete inventory is based on an analysis of existing inventory quantities compared to estimated future consumption. Future consumption is estimated based upon assumptions about how past consumption, recent purchases, backlog or other factors indicate future consumption.
We identified the evaluation of inventory excess and obsolescence as a critical audit matter. Complex auditor judgment was required to evaluate that past consumption, recent purchases, or backlog accurately indicate future consumption and thus meet the accounting objective of recording inventory at the lower of its cost or net realizable value.
The following are the primary procedures we performed to address this critical audit matter. We evaluated the design and tested the operating effectiveness of certain internal controls related to the critical audit matter. This included controls related to the Company’s process to develop the assumptions used to predict future consumption of inventory. We assessed the Company’s assumptions about how past consumption, recent purchases, or backlog indicate future consumption by: (1) Evaluating historical cumulative write down trends and relevant changes to the overall business environment, including key customers and product lines in order to evaluate the Company’s methodology that actual past consumption history, recent purchases, or backlog are relevant as predictors of future inventory consumption, and (2) Selecting a sample of products within inventory and for each sample selection (a) evaluating how past consumption, recent purchases, or backlog indicate future consumption of the specific sampled inventory product, and (b) recalculating the Company’s estimate of the cumulative inventory write-downs based on the actual quantity of product on hand compared to the estimate of future consumption.
/s/ KPMG LLP
We have served as the Company’s auditor since 2013.
Portland, Oregon
February 18, 2022
46
FORMFACTOR, INC.
CONSOLIDATED BALANCE SHEETS
December 25, 2021
December 26, 2020
(In thousands, except share and per share data)
ASSETS
Current assets:
Cash and cash equivalents
$
151,010
$
187,225
Marketable securities
125,055
67,810
Accounts receivable, net
115,541
107,603
Inventories, net
111,548
99,229
Restricted cash
2,233
1,904
Prepaid expenses and other current assets
18,652
23,303
Total current assets
524,039
487,074
Restricted cash
2,099
1,969
Operating lease, right-of-use-assets
35,210
30,756
Property, plant and equipment, net
146,555
104,103
Goodwill
212,299
212,761
Intangibles, net
36,342
59,147
Deferred tax assets
61,995
66,242
Other assets
1,981
1,165
Total assets
$
1,020,520
$
963,217
LIABILITIES AND STOCKHOLDERS' EQUITY
Current liabilities:
Accounts payable
$
57,862
$
62,045
Accrued liabilities
50,836
55,342
Current portion of term loans, net of unamortized issuance cost of $5 and $5
8,931
9,516
Deferred revenue
23,224
20,964
Operating lease liabilities
7,901
6,704
Total current liabilities
148,754
154,571
Term loans, less current portion, net of unamortized issuance cost of $65 and $70
15,434
24,978
Deferred tax liabilities
3,623
5,346
Long-term operating lease liabilities
31,009
27,996
Other liabilities
5,920
6,242
Total liabilities
204,740
219,133
Stockholders' equity:
Preferred stock, $0.001 par value:
10,000,000 shares authorized; no shares issued and outstanding
—
—
Common stock, $0.001 par value:
250,000,000 shares authorized; 78,240,506 and 77,437,997 shares issued and outstanding
78
78
Additional paid-in capital
898,945
903,838
Accumulated other comprehensive income (loss)
(1,449)
5,886
Accumulated deficit
(81,794)
(165,718)
Total stockholders' equity
815,780
744,084
Total liabilities and stockholders' equity
$
1,020,520
$
963,217
The accompanying notes are an integral part of these consolidated financial statements.
47
FORMFACTOR, INC.
CONSOLIDATED STATEMENTS OF INCOME
Fiscal Year Ended
December 25, 2021
December 26, 2020
December 28, 2019
(In thousands, except per share data)
Revenues
$
769,674
$
693,616
$
589,464
Cost of revenues
446,907
405,696
351,968
Gross profit
322,767
287,920
237,496
Operating expenses:
Research and development
100,937
89,034
81,499
Selling, general and administrative
123,792
115,098
106,335
Total operating expenses
224,729
204,132
187,834
Operating income
98,038
83,788
49,662
Interest income
569
1,501
2,714
Interest expense
(602)
(864)
(1,915)
Other income, net
495
750
602
Income before income taxes
98,500
85,175
51,063
Provision for income taxes
14,576
6,652
11,717
Net income
$
83,924
$
78,523
$
39,346
Net income per share:
Basic
$
1.08
$
1.02
$
0.52
Diluted
$
1.06
$
0.99
$
0.51
Weighted-average number of shares used in per share calculations:
Basic
77,787
76,681
74,994
Diluted
79,133
79,001
77,286
The accompanying notes are an integral part of these consolidated financial statements.
48
FORMFACTOR, INC.
CONSOLIDATED STATEMENTS OF COMPREHENSIVE INCOME
Fiscal Year Ended
December 25, 2021
December 26, 2020
December 28, 2019
(In thousands)
Net income
$
83,924
$
78,523
$
39,346
Other comprehensive income (loss), net of tax:
Translation adjustments and other
(5,995)
5,131
(1,028)
Unrealized gains (losses) on available-for-sale marketable securities
(598)
226
316
Unrealized gains (losses) on derivative instruments
(742)
1,188
(727)
Other comprehensive income (loss), net of tax
(7,335)
6,545
(1,439)
Comprehensive income
$
76,589
$
85,068
$
37,907
The accompanying notes are an integral part of these consolidated financial statements.
49
FORMFACTOR, INC.
CONSOLIDATED STATEMENTS OF STOCKHOLDERS' EQUITY
Common Stock
Additional Paid-in Capital
Accumulated Other Comprehensive Income (Loss)
Accumulated Deficit
Total
Shares
Amount
(In thousands, except shares)
Balances, December 29, 2018
74,139,712
$
74
$
862,897
$
780
$
(283,587)
$
580,164
Issuance of common stock under the Employee Stock Purchase Plan
544,271
1
6,806
—
—
6,807
Issuance of common stock pursuant to exercise of options for cash
162,956
—
1,176
—
—
1,176
Issuance of common stock pursuant to vesting of restricted stock units, net of stock withheld for tax
918,051
1
(8,026)
—
—
(8,025)
Stock-based compensation
—
—
22,968
—
—
22,968
Other comprehensive loss
—
—
—
(1,439)
—
(1,439)
Net income
—
—
—
—
39,346
39,346
Balances, December 28, 2019
75,764,990
76
885,821
(659)
(244,241)
640,997
Issuance of common stock under the Employee Stock Purchase Plan
485,566
—
7,875
—
—
7,875
Issuance of common stock pursuant to exercise of options for cash
255,769
1
2,134
—
—
2,135
Issuance of common stock pursuant to vesting of restricted stock units, net of stock withheld for tax
931,672
1
(15,451)
—
—
(15,450)
Stock-based compensation
—
—
23,459
—
—
23,459
Other comprehensive income
—
—
—
6,545
—
6,545
Net income
—
—
—
—
78,523
78,523
Balances, December 26, 2020
77,437,997
78
903,838
5,886
(165,718)
744,084
Issuance of common stock under the Employee Stock Purchase Plan
378,584
—
9,809
—
—
9,809
Issuance of common stock pursuant to exercise of options for cash
100,000
—
844
—
—
844
Issuance of common stock pursuant to vesting of restricted stock units, net of stock withheld for tax
946,325
1
(20,604)
—
—
(20,603)
Purchase and retirement of common stock
(622,400)
(1)
(24,037)
—
—
(24,038)
Stock-based compensation
—
—
29,095
—
—
29,095
Other comprehensive loss
—
—
—
(7,335)
—
(7,335)
Net income
—
—
—
—
83,924
83,924
Balances, December 25, 2021
78,240,506
$
78
$
898,945
$
(1,449)
$
(81,794)
$
815,780
The accompanying notes are an integral part of these consolidated financial statements.
50
FORMFACTOR, INC.
CONSOLIDATED STATEMENTS OF CASH FLOWS
Fiscal Year Ended
December 25, 2021
December 26, 2020
December 28, 2019
(In thousands)
Cash flows from operating activities:
Net income
$
83,924
$
78,523
$
39,346
Adjustments to reconcile net income to net cash provided by operating activities:
Depreciation
25,772
20,694
17,185
Amortization
18,747
27,991
27,672
Amortization (accretion) of discount on investments
403
(2)
(365)
Reduction in the carrying amount of right-of-use assets
7,172
5,955
5,269
Stock-based compensation expense
29,384
23,830
23,176
Amortization of debt issuance costs
5
32
160
Deferred income tax provision (benefit)
3,869
(562)
4,954
Provision for excess and obsolete inventories
15,544
13,117
10,421
Acquired inventory step-up amortization
723
838
465
Loss on disposal of long-lived assets
449
451
486
Non-cash restructuring charges
1,646
—
—
Gain on contingent consideration
(95)
(2,879)
—
Foreign currency transaction losses (gains)
1,577
(968)
408
Loss on derivative instruments
—
372
110
Changes in assets and liabilities:
Accounts receivable
(9,086)
(3,545)
481
Inventories
(31,655)
(22,191)
(14,295)
Prepaid expenses and other current assets
3,808
(6,207)
230
Other assets
(326)
179
(441)
Accounts payable
(6,589)
16,788
(27)
Accrued liabilities
(725)
13,892
7,517
Other liabilities
285
362
166
Deferred revenues
1,974
8,901
3,130
Operating lease liabilities
(7,442)
(6,315)
(5,000)
Net cash provided by operating activities
139,364
169,256
121,048
Cash flows from investing activities:
Acquisition of property, plant and equipment
(66,496)
(55,865)
(20,847)
Acquisition of business, net of cash acquired
—
(51,880)
(20,524)
Proceeds from sale of subsidiary
—
82
132
Purchases of marketable securities
(149,979)
(51,224)
(76,327)
Proceeds from maturities of marketable securities
91,734
59,965
51,214
Net cash used in investing activities
(124,741)
(98,922)
(66,352)
Cash flows from financing activities:
Proceeds from issuances of common stock
10,653
10,010
8,093
Purchase of common stock through stock repurchase program
(24,038)
—
—
Tax withholdings related to net share settlements of equity awards
(20,604)
(15,450)
(8,025)
Proceeds from term loan
—
18,000
23,354
Payments on term loan
(9,337)
(43,417)
(30,000)
Payment of term loan issuance costs
—
(78)
—
Payment of contingent consideration
(3,873)
—
—
Net cash used in financing activities
(47,199)
(30,935)
(6,578)
Effect of exchange rate changes on cash, cash equivalents and restricted cash
(3,180)
3,762
(727)
Net increase (decrease) in cash, cash equivalents and restricted cash
(35,756)
43,161
47,391
Cash, cash equivalents and restricted cash, beginning of year
191,098
147,937
100,546
Cash, cash equivalents and restricted cash, end of year
$
155,342
$
191,098
$
147,937
The accompanying notes are an integral part of these consolidated financial statements.
51
FORMFACTOR, INC.
CONSOLIDATED STATEMENTS OF CASH FLOWS
Fiscal Year Ended
December 25, 2021
December 26, 2020
December 28, 2019
(In thousands)
Supplemental disclosure of non-cash investing and financing activities:
Operating lease, right-of-use assets obtained in exchange for lease obligations
$
12,254
$
1,912
$
36,709
Contingent consideration payable related to FRT acquisition
—
—
5,364
Increase in accounts payable and accrued liabilities related to property, plant and equipment purchases
2,711
2,545
866
Supplemental disclosure of cash flow information:
Income taxes paid, net
$
7,957
$
9,150
$
4,324
Cash paid for interest
643
867
1,405
Operating cash outflows from operating leases
8,520
7,546
6,713
Reconciliation of cash, cash equivalents and restricted cash:
Cash and cash equivalents
$
151,010
$
187,225
$
144,545
Restricted cash, current
2,233
1,904
1,981
Restricted cash
2,099
1,969
1,411
Total cash, cash equivalents and restricted cash
$
155,342
$
191,098
$
147,937
The accompanying notes are an integral part of these consolidated financial statements.
52
FORMFACTOR, INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
Note 1—Formation and Nature of Business
FormFactor, Inc. was incorporated in Delaware on April 15, 1993 and is headquartered in Livermore, California. We are a leading provider of essential test and measurement technologies along the full semiconductor product lifecycle - from characterization, modeling, reliability, and design de-bug, to qualification and production test. We provide a broad range of high-performance probe cards, analytical probes, probe stations, metrology systems, thermal systems, and cryogenic systems to both semiconductor companies and scientific institutions. Our products provide electrical and physical information from a variety of semiconductor and electro-optical devices and integrated circuits from early research, through development, to high-volume production. Customers use our products and services to accelerate profitability by optimizing device performance and advancing yield knowledge.
Design, development and manufacturing operations are located in Livermore, San Jose, Carlsbad, and Baldwin Park, California, Beaverton, Oregon and Boulder, Colorado, United States and Bergisch Gladbach, Munich and Thiendorf, Germany, and sales, service and support operations are located in the United States, Germany, France, Italy, South Korea, Japan, Taiwan, China and Singapore.
Fiscal Year
Our fiscal year ends on the last Saturday in December. The fiscal years ended on December 25, 2021, December 26, 2020 and December 28, 2019, each consisted of 52 weeks, respectively.
Note 2—Summary of Significant Accounting Policies
Basis of Consolidation and Foreign Currency Translation
The consolidated financial statements include our accounts and those of our wholly-owned subsidiaries. All intercompany balances and transactions have been eliminated.
The functional currencies of certain of our foreign subsidiaries are the local currencies and, accordingly, all assets and liabilities of these foreign operations are translated to U.S. Dollars at current period-end exchange rates, and revenues and expenses are translated to U.S. Dollars using average exchange rates in effect during the period. The gains and losses from the foreign currency translation of these subsidiaries' financial statements are included as a separate component of stockholders' equity on our Consolidated Balance Sheets under Accumulated other comprehensive income (loss).
Certain other of our foreign subsidiaries use the U.S. Dollar as their functional currency. Accordingly, monetary assets and liabilities in non-functional currencies of these subsidiaries are remeasured using exchange rates in effect at the end of the period. Revenues and costs in local currency are remeasured using average exchange rates for the period, except for costs related to those balance sheet items that are remeasured using historical exchange rates. The resulting remeasurement gains and losses are included in the Consolidated Statements of Income as a component of Other income, net as incurred.
Use of Estimates
The preparation of consolidated financial statements in conformity with accounting principles generally accepted in the United States of America (“GAAP”) requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities, the disclosure of contingent assets and liabilities at the date of the financial statements, and the reported amounts of revenues and expenses during the reporting period. Estimates may change as new information is obtained. We believe that the estimates, assumptions and judgments involved in revenue recognition, fair value of marketable securities, fair value of derivative financial instruments used to hedge both foreign currency and interest rate exposures, allowance for credit losses, reserves for product warranty, valuation of obsolete and slow moving inventory, assets acquired and liabilities assumed in business combinations, legal contingencies, valuation of goodwill, the assessment of recoverability of long-lived assets, valuation and recognition of stock-based compensation, loss contingencies, provision for income taxes and valuation of deferred tax assets have the greatest potential impact on our consolidated financial statements. Actual results could differ from those estimates.
Business Acquisitions
Our consolidated financial statements include the operations of acquired businesses after the completion of their respective acquisitions. We account for acquired businesses using the acquisition method of accounting, which requires, among other things, that assets acquired and liabilities assumed be recognized at their estimated fair values as of the acquisition date, and
53
FORMFACTOR, INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
that the fair value of acquired intangibles be recorded on the balance sheet. Transaction costs are expensed as incurred. Any excess of the purchase price over the assigned fair values of the net assets acquired is recorded as goodwill.
Cash and Cash Equivalents and Marketable Securities
Cash and cash equivalents consist of deposits and financial instruments which are readily convertible into cash and have original maturities of 90 days or less at the time of acquisition.Marketable securities consist primarily of highly liquid investments with maturities of greater than 90 days when purchased. We classify our available-for-sale marketable securities as current assets because they represent investments of cash available for current operations. As a result, the Company recorded all its marketable securities in short-term investments regardless of the contractual maturity date of the securities. Furthermore, we report them at fair value with the related unrealized gains and losses included in Accumulated other comprehensive income (loss) in our Consolidated Balance Sheets. Any unrealized losses which are considered to be other-than-temporary are recorded in Other income, net, in the Consolidated Statements of Income. Realized gains and losses on the sale of marketable securities are determined using the specific-identification method and recorded in Other income, net, in the Consolidated Statements of Income.
All of our available-for-sale investments are subject to a periodic impairment review. If an available-for-sale debt security’s fair value is less than its amortized cost basis, then we evaluate whether the decline is the result of a credit loss, in which case an impairment is recorded through an allowance for credit losses. Unrealized gains and losses not attributable to credit losses are included, net of tax, in Accumulated other comprehensive income (loss) in our Consolidated Balance Sheets. We did not record an allowance for credit losses related to our available-for-sale investments during fiscal 2021.
Foreign Exchange Management
We transact business in various foreign currencies. We enter into forward foreign exchange contracts in an effort to mitigate the risks associated with currency fluctuations on certain foreign currency balance sheet exposures and certain operational costs denominated in local currency impacting our statement of income. For accounting purposes, certain of our foreign currency forward contracts are not designated as hedging instruments and, accordingly, we record the fair value of these contracts as of the end of our reporting period in our Consolidated Balance Sheets with changes in fair value recorded within Other income, net in our Consolidated Statements of Income for both realized and unrealized gains and losses. Certain of our foreign currency forward contracts are designated as cash flow hedges, and, accordingly, we record the fair value of these contracts as of the end of our reporting period in our Consolidated Balance Sheets with changes in fair value recorded as a component of Accumulated other comprehensive income (loss) and reclassified into earnings in the same period in which the hedged transaction affects earnings, and in the same line item on the Consolidated Statements of Income as the impact of the hedge transaction. We do not use derivative financial instruments for trading or speculative purposes.
Accounts Receivable and Allowance for Credit Losses
The majority of our accounts receivable are derived from sales to large multinational semiconductor manufacturers throughout the world, are recorded at their invoiced amount and do not bear interest.
In order to monitor potential credit losses, we perform ongoing credit evaluations of our customers' financial condition. An allowance for credit losses accounts is maintained based upon our assessment of the expected collectability of all accounts receivable. The allowance for credit losses is reviewed and assessed for adequacy on a quarterly basis. We take into consideration (1) any circumstances of which we are aware of a customer's inability to meet its financial obligations and (2) our judgments as to prevailing economic conditions in the industry and their impact on our customers. If circumstances change, and the financial condition of our customers is adversely affected and they are unable to meet their financial obligations, we may need to take additional allowances, which would result in an increase in our operating expense.
Activity related to our allowance for credit losses was as follows (in thousands):
Fiscal Year Ended
December 25, 2021
December 26, 2020
December 28, 2019
Balance at beginning of year
$
248
$
222
$
185
Charges (reversals) to costs and expenses
(53)
26
37
Balance at end of year
$
195
$
248
$
222
Inventories
We state our inventories at the lower of cost (principally standard cost which approximates actual cost on a first in, first out basis) or net realizable value. We regularly assess the value of our inventory and will periodically write down its value for
54
FORMFACTOR, INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
estimated excess inventory and product obsolescence based upon an analysis of existing inventory quantities compared to estimated future consumption. Future consumption is estimated based upon assumptions about how past consumption, recent purchases, backlog and other factors indicate future consumption. On a quarterly basis, we review existing inventory quantities in comparison to our past consumption, recent purchases, backlog and other factors to determine what inventory quantities, if any, may not be sellable. Based on this analysis, we record an adjustment to the cost basis of inventory when evidence exists that the net realizable value of inventory is lower than its cost, which occurs when we have excess and/or obsolete inventory. Once the value is adjusted, the original cost of our inventory, less the related inventory write-down, represents the new cost basis. Reversal of these write downs is recognized only when the related inventory has been scrapped or sold. Shipping and handling costs are classified as a component of Cost of revenues in the Consolidated Statements of Income.
We design, manufacture and sell a custom product into a market that has been subject to cyclicality and significant demand fluctuations. Many of our products are complex, custom to a specific chip design and have to be delivered on short lead-times. Probe cards are manufactured in low volumes, but, for certain materials, the purchases are often subject to minimum order quantities in excess of the actual underlying probe card demand. It is not uncommon for us to acquire production materials and commence production activities based on estimated production yields and forecasted demand prior to, or in excess of, actual demand for our probe cards. These factors result in normal recurring inventory valuation charges to Cost of revenues.
Inventory write downs totaled $15.5 million, $13.1 million and $10.4 million for fiscal 2021, 2020 and 2019, respectively.
Restricted Cash
Restricted cash is comprised primarily of funds held by our foreign subsidiaries for employee obligations, office leases, customer deposits, temporary customs import permits, and environmental remediation.
Property, Plant, and Equipment
Property, plant and equipment is stated at cost less accumulated depreciation and amortization. Depreciation is recorded on a straight-line method. Machinery and equipment, computer equipment and software, and furniture and fixtures are depreciated over 3 to 5 years. Building and building improvements are depreciated over 30 years. Leasehold improvements are amortized over 7 years. Construction-in-progress assets are not depreciated until the assets are placed in service. Upon sale or retirement of assets, the cost and related accumulated depreciation or amortization are removed from the Consolidated Balance Sheets and the resulting gain or loss, if any, is reflected in Operating income in our Consolidated Statements of Income.
Leases
The Company determines if an arrangement is a lease at its inception. Right-of-use (“ROU”) assets and liabilities are recognized at the lease commencement date based on the present value of lease payments over the lease term. We use our estimated incremental borrowing rate in determining the present value of lease payments considering the term of the lease, which is derived from information available at the lease commencement date. The lease term includes renewal options when it is reasonably certain that the option will be exercised and excludes termination options. To the extent that the Company’s agreements have variable lease payments, the Company includes variable lease payments that depend on an index or a rate and excludes those that depend on facts or circumstances occurring after the commencement date, other than the passage of time.
Lease expense for these leases is recognized on a straight-line basis over the lease term. We have elected not to recognize ROU assets and lease liabilities that arise from short-term leases for any class of underlying asset. Operating leases are included in Operating lease, right-of-use-assets, Operating lease liabilities, and Long-term operating lease liabilities in our Consolidated Balance Sheets.
Goodwill
Goodwill represents the excess of the purchase price over the fair value of identifiable assets acquired and liabilities assumed. Goodwill is not amortized, rather assessed, at least annually, for impairment at a reporting unit level. Impairment of goodwill exists when the carrying amount of a reporting unit exceeds its fair value. A goodwill impairment loss is recognized for the amount that the carrying amount of the reporting unit, including goodwill, exceeds its fair value, limited to the total amount of goodwill allocated to that reporting unit. If the fair value of a reporting unit exceeds the carrying amount, goodwill of the reporting unit is not considered impaired.
We evaluate impairment by first assessing qualitative factors to determine whether it is necessary to perform a quantitative impairment test. If we determine, as a result of the qualitative assessment, that it is more likely than not that the fair value of a reporting unit is less than its carrying amount, then the quantitative impairment test is required. Otherwise, no further testing is required.
55
FORMFACTOR, INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
We perform our annual goodwill impairment test in the fourth quarter of each year by assessing qualitative factors, including, but not limited to an assessment of our market capitalization, which was significantly higher than our book value. Based on these tests, we determined that the quantitative impairment test was not required and no impairment charges were recorded in fiscal 2021, 2020 or 2019.
The evaluation of goodwill for impairment requires the exercise of judgment. In the event of future changes in business conditions, we will be required to reassess and update our forecasts and estimates used in future impairment analysis. If the results of these analysis are lower than current estimates, a material impairment charge may result at that time.
See Note 10, Goodwill and Intangible Assets, for additional information.
Intangible Assets
Intangible assets consist of acquisition related intangible assets and intellectual property. The intangible assets are being amortized over periods of 1 to 10 years, which reflect the pattern in which economic benefits of the assets are expected to be realized. We perform a review of intangible assets when facts and circumstances indicate that the useful life is shorter than originally estimated or that the carrying amount of assets may not be recoverable. Such facts and circumstances include significant adverse changes in the business climate or legal factors; current period cash flow or operating losses combined with a history of losses or a forecast of continuing losses associated with the use of the intangible assets; and current expectation that the intangible assets will more likely than not be sold or disposed of before the end of their estimated useful lives. We assess the recoverability of identified intangible assets by comparing the projected undiscounted net cash flows associated with the related asset or group of assets over their remaining lives against their respective carrying amounts. Impairments, if any, are based on the excess of the carrying amount over the fair value of those assets.
See Note 10, Goodwill and Intangible Assets, for additional information.
Impairment of Long-Lived Assets
We test long-lived assets or asset groups, such as property, plant and equipment and intangible assets, for recoverability when events or changes in circumstances indicate that their carrying amounts may not be recoverable. Circumstances which could trigger a review include, but are not limited to: significant decreases in the market price of the asset; significant adverse changes in the business climate or legal factors; accumulation of costs significantly in excess of the amount originally expected for the acquisition or construction of the asset; current period cash flow or operating losses combined with a history of losses or a forecast of continuing losses associated with the use of the asset; and current expectation that the asset will more likely than not be sold or disposed of before the end of its estimated useful life.
Recoverability is assessed based on the carrying amounts of the asset or asset group and the sum of the undiscounted cash flows expected to result from the use and the eventual disposal of the asset. An impairment loss is recognized when the carrying amount is not recoverable and exceeds fair value.
Concentration of Credit Risk and Other Risks and Uncertainties
Financial instruments that potentially subject us to concentrations of credit risk consist primarily of cash equivalents, marketable securities and accounts receivable. Our cash equivalents and marketable securities are held in safekeeping by large, credit worthy financial institutions. We invest our excess cash primarily in U.S. banks, government and agency bonds, money market funds and corporate obligations. We have established guidelines relative to credit ratings, diversification and maturities that seek to maintain safety and liquidity. Deposits in these banks may exceed the amounts of insurance provided on such deposits. To date, we have not experienced any losses on our deposits of cash and cash equivalents. We market and sell our products to a relatively narrow base of customers and generally do not require collateral.
The following customers represented 10% or more of our revenues:
Fiscal Year Ended
December 25, 2021
December 26, 2020
December 28, 2019
Intel Corporation
20.4
%
31.5
%
25.3
%
Samsung Electronics Co., LTD.
11.4
%
*
11.5
%
* Less than 10% of revenues.
At December 25, 2021, one customer accounted for 13.8% of gross accounts receivable. At December 26, 2020, two customers accounted for 15.3% and 13.7% of gross accounts receivable, respectively. No other customers accounted for 10% or more of gross accounts receivable for these fiscal period ends.
56
FORMFACTOR, INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
We are exposed to non-performance risk by counterparties on our derivative instruments used in hedging activities. We seek to minimize risk by diversifying our hedging program across multiple financial institutions. These counterparties are large international financial institutions, and, to date, no such counterparty has failed to meet its financial obligations to us.
Revenue Recognition
Revenue is recognized upon transferring control of products and services, and the amounts recognized reflect the consideration we expect to be entitled to receive in exchange for these products and services. Revenue is recognized net of any taxes collected from customers, which are subsequently remitted to governmental authorities. An arrangement may include some or all of the following products and services: probe cards, systems, accessories, installation services, service contracts and extended warranty contracts. We sell our products and services direct to customers and to partners in two distribution channels: global direct sales force and through a combination of manufacturers’ representatives and distributors.
A performance obligation is a promise in a contract to transfer a distinct good or service to the customer. In contracts with multiple performance obligations, we identify each performance obligation and evaluate whether the performance obligation is distinct within the context of the contract at contract inception. Performance obligations that are not distinct at contract inception are combined and accounted for as one unit of account. Generally, the performance obligations in a contract are considered distinct within the context of the contract and are accounted for as separate units of account.
Our products may be customized to our customers’ specifications, however, control of our product is typically transferred to the customer at the point in time the product is either shipped or delivered, depending on the terms of the arrangement, as the criteria for over time recognition is not met. In limited circumstances, substantive acceptance by the customer exists which results in the deferral of revenue until acceptance is formally received from the customer. Judgment may be required in determining if the acceptance clause is substantive. In certain instances control of products is transferred to the customer over time based on performance and in those instances we utilize an appropriate input or output measure to determine to what extent control has transferred to the customer. Judgment may be required in determining an appropriate measure of performance.
Installation services are routinely provided to customers purchasing our systems. Installation services are a distinct performance obligation apart from the systems and recognized in the period they are performed. Service contracts, which include repair and maintenance service contracts, and extended warranty contracts are also distinct performance obligations and recognized over the contractual service period, which ranges from one to three years. For these service contracts recognized over time, we use an input measure, days elapsed, to measure progress.
A contract’s transaction price is allocated to each distinct performance obligation and recognized as revenue when, or as, the performance obligation is satisfied. In determining the transaction price, we evaluate whether the price is subject to refund or adjustment to determine the net consideration to which we expect to be entitled. We generally do not grant return privileges, except for defective products during the warranty period. Sales incentives and other programs that we may make available to our customers are considered to be a form of variable consideration, which is estimated in determining the contract’s transaction price to be allocated to the performance obligations.
For contracts with multiple performance obligations, we allocate the contract’s transaction price to each performance obligation based on its relative stand-alone selling price. The stand-alone selling prices are determined based on observable prices, which are the prices at which we separately sell these products. For items which do not have observable prices, we use our best estimate of the stand-alone selling prices.
Transaction price allocated to the remaining performance obligations: On December 25, 2021, we had $7.8 million of remaining performance obligations, which were comprised of deferred service contracts and extended warranty contracts and contracts with overtime revenue recognition that are not yet delivered. We expect to recognize approximately 79.5% of our remaining performance obligations as revenue in fiscal 2022, approximately 16.2% in fiscal 2023, and approximately 4.3% in fiscal 2024 and thereafter. The foregoing excludes the value of remaining performance obligations that have original durations of one year or less, and also excludes information about variable consideration allocated entirely to a wholly unsatisfied performance obligation.
Contract balances: The timing of revenue recognition may differ from the timing of invoicing to customers. Accounts receivable is recorded at the invoiced amount, net of an allowance for credit losses. A receivable is recognized in the period we deliver goods or provide services or when our right to consideration is unconditional. A contract asset is recorded when we have performed under the contract but our right to consideration is conditional on something other than the passage of time.
57
FORMFACTOR, INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
Contract assets as of December 25, 2021 and December 26, 2020 were $0.9 million and $3.7 million, respectively, and are reported on the Consolidated Balance Sheets as a component of Prepaid expenses and other current assets.
Contract liabilities include payments received and payments due in advance of performance under a contract and are satisfied as the associated revenue is recognized. Contract liabilities are reported on the Consolidated Balance Sheets on a contract-by-contract basis at the end of each reporting period as a component of Deferred revenue and Other liabilities. Contract liabilities totaled $24.2 million and $22.2 million at December 25, 2021 and December 26, 2020, respectively. During fiscal 2021, we recognized $17.8 million of revenue that was included in contract liabilities as of December 26, 2020.
Costs to obtain a contract: We generally expense sales commissions when incurred as a component of Selling, general and administrative expense as the amortization period is typically less than one year.
Revenue by Category: Refer to Note 16, Segments and Geographic Information, for further details.
Warranty Obligations
We offer warranties on certain products and record a liability for the estimated future costs associated with warranty claims at the time revenue is recognized. The warranty liability is based upon historical experience and our estimate of the level of future costs. While we engage in product quality programs and processes, our warranty obligation is affected by product failure rates, material usage and service delivery costs incurred in correcting a product failure. We continuously monitor product returns for warranty and maintain a reserve for the related expenses based upon our historical experience and any specifically identified field failures. As we sell new products to our customers, we must exercise considerable judgment in estimating the expected failure rates. This estimating process is based on historical experience of similar products, as well as various other assumptions that we believe to be reasonable under the circumstances.
We provide for the estimated cost of product warranties at the time revenue is recognized. Warranty costs are reflected in the Consolidated Statement of Income as a Cost of revenues.
A reconciliation of the changes in our warranty liability is as follows (in thousands):
Fiscal Year Ended
December 25, 2021
December 26, 2020
December 28, 2019
Balance at beginning of year
$
3,918
$
1,942
$
2,102
Accruals
5,759
5,727
3,881
Settlements
(6,872)
(3,751)
(4,041)
Balance at end of year
$
2,805
$
3,918
$
1,942
Research and Development
Research and development expenses include expenses related to product development, engineering and material costs. All research and development costs are expensed as incurred.
Income Taxes
We utilize the asset and liability method of accounting for income taxes, under which deferred taxes are determined based on the temporary differences between the financial statement and tax basis of assets and liabilities using tax rates expected to be in effect during the years in which the basis differences reverse and for operating losses and tax credit carryforwards. We estimate our provision for income taxes and amounts ultimately payable or recoverable in numerous tax jurisdictions around the world. Estimates involve interpretations of regulations and are inherently complex. Resolution of income tax treatments in individual jurisdictions may not be known for many years after completion of any fiscal year. We are required to evaluate the realizability of our deferred tax assets on an ongoing basis to determine whether there is a need for a valuation allowance with respect to such deferred tax assets. A valuation allowance is recorded when it is more likely than not that some or all of the deferred tax assets will not be realized. In evaluating the ability to recover deferred tax assets, we consider all available positive and negative evidence giving greater weight to our recent cumulative income, our historical ability to utilize net operating losses in recent years and our forecast of future taxable income, including the reversal of temporary differences and the implementation of feasible and prudent tax planning strategies.
We recognize and measure uncertain tax positions taken or expected to be taken in a tax return if it is more likely than not that the tax position will be sustained on examination by the taxing authorities, based on the technical merits of the position. The tax benefits recognized are then measured based on the largest benefit that has a greater than 50 percent likelihood of being realized
58
FORMFACTOR, INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
upon ultimate settlement. We report a liability for unrecognized tax benefits resulting from uncertain tax positions taken or expected to be taken in a tax return. We adjust these reserves in light of changing facts and circumstances, such as the closing of a tax audit or the refinement of an estimate. To the extent that the final tax outcome of these matters is different than the amounts recorded, such differences will impact the provision for income taxes in the period in which such determination is made. The provision for income taxes includes the impact of reserve provisions and changes to reserves that are considered appropriate, as well as the related net interest. We recognize interest and penalties related to unrecognized tax benefits within the income tax provision. Accrued interest and penalties are included within the related tax liability in the Consolidated Balance Sheets.
We file annual income tax returns in multiple taxing jurisdictions around the world. A number of years may elapse before an uncertain tax position is audited and finally resolved. While it is often difficult to predict the final outcome or the timing of resolution of any particular uncertain tax position, we believe that our related liability reflects the most likely outcome. We adjust the liability, as well as the related interest, in light of changing facts and circumstances. Settlement of any particular position could require the use of cash.
Stock-Based Compensation
We recognize compensation expense for all stock-based awards based on the grant-date estimated fair values. The value of the portion of the award that is ultimately expected to vest is recognized as expense ratably over the requisite service periods in our Consolidated Statements of Income. The fair value of stock options is measured using the Black-Scholes option pricing model, while the fair value for restricted stock units (“RSUs”) is measured based on the closing market price of our common stock on the date of grant. The fair value of Performance RSUs (“PRSU”) is based on certain market performance criteria and is measured using a Monte Carlo simulation pricing model.
See Note 12, Stockholders' Equity, and Note 13, Stock-Based Compensation, for additional information.
Net Income Per Share
Basic net income per share is computed by dividing net income by the weighted-average number of common shares outstanding for the period. Diluted net income per share is computed giving effect to all potentially dilutive common stock and common stock equivalents, including stock options, RSUs and common stock subject to repurchase.
The following table reconciles the shares used in calculating basic net income per share and diluted net income per share (in thousands):
Fiscal Year Ended
December 25, 2021
December 26, 2020
December 28, 2019
Weighted-average shares used in computing basic net income per share
77,787
76,681
74,994
Add potentially dilutive securities
1,346
2,320
2,292
Weighted-average shares used in computing basic and diluted net income per share
79,133
79,001
77,286
Accumulated Other Comprehensive Income (Loss)
Accumulated other comprehensive income (loss) (“OCI”) includes the following items, the impact of which has been excluded from earnings and reflected as components of stockholders' equity as shown below (in thousands):
December 25, 2021
December 26, 2020
Unrealized losses on available-for-sale marketable securities
$
(724)
$
(126)
Translation adjustments and other
(811)
5,184
Unrealized gains on derivative instruments
86
828
Accumulated other comprehensive income (loss)
$
(1,449)
$
5,886
59
FORMFACTOR, INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
Note 3—Balance Sheet Components
Marketable Securities
Marketable securities consisted of the following (in thousands):
December 25, 2021
Amortized Cost
Gross Unrealized Gains
Gross Unrealized Losses
Fair Value
U.S. treasuries
$
39,128
$
—
$
(143)
$
38,985
Commercial paper
32,174
—
(13)
32,161
Corporate bonds
52,832
29
(151)
52,710
Certificate of deposit
1,200
1
(2)
1,199
$
125,334
$
30
$
(309)
$
125,055
December 26, 2020
Amortized Cost
Gross Unrealized Gains
Gross Unrealized Losses
Fair Value
U.S. treasuries
$
40,602
$
124
$
—
$
40,726
Corporate bond
24,156
176
(2)
24,330
Certificate of deposit
2,160
19
—
2,179
U.S. agency securities
575
—
—
575
$
67,493
$
319
$
(2)
$
67,810
We typically invest in highly-rated securities with low probabilities of default. Our investment policy requires investments to be rated single A or better, limits the types of acceptable investments, concentration as to security holder and duration of the investment. The gross unrealized gains and losses in fiscal 2021 and 2020 were caused primarily by changes in interest rates.
The longer the duration of marketable securities, the more susceptible they are to changes in market interest rates and bond yields. As yields increase, those securities with a lower yield-at-cost show a mark-to-market unrealized loss. We anticipate recovering the full cost of the securities either as market conditions improve, or as the securities mature. Accordingly, we believe that the unrealized losses are not as a result of a credit loss. As of December 25, 2021 and December 26, 2020, gross unrealized losses related to our marketable securities portfolio were not material.
The contractual maturities of marketable securities were as follows (in thousands):
December 25, 2021
December 26, 2020
Amortized Cost
Fair Value
Amortized Cost
Fair Value
Due in one year or less
$
75,804
$
75,778
$
50,500
$
50,679
Due after one year to five years
49,530
49,277
16,993
17,131
$
125,334
$
125,055
$
67,493
$
67,810
See also Note 9, Fair Value.
Inventories, net
Inventories consisted of the following (in thousands):
December 25, 2021
December 26, 2020
Raw materials
$
57,673
$
48,122
Work-in-progress
35,935
30,806
Finished goods
17,940
20,301
$
111,548
$
99,229
60
FORMFACTOR, INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
Property, Plant and Equipment, net
Property, plant and equipment, net consisted of the following (in thousands):
December 25, 2021
December 26, 2020
Land
$
4,751
$
4,751
Building and building improvements
41,722
—
Machinery and equipment
252,632
226,185
Computer equipment and software
44,667
36,361
Furniture and fixtures
7,293
6,894
Leasehold improvements
82,266
79,144
Sub-total
433,331
353,335
Less: Accumulated depreciation and amortization
(312,700)
(294,468)
Net property, plant and equipment
120,631
58,867
Construction-in-progress
25,924
45,236
Total
$
146,555
$
104,103
Accrued Liabilities
Accrued liabilities consisted of the following (in thousands):
December 25, 2021
December 26, 2020
Accrued compensation and benefits
$
29,706
$
33,110
Accrued employee stock purchase plan contributions withheld
4,693
4,240
Accrued warranty
2,805
3,918
Accrued income and other taxes
8,086
6,976
Accrued restructuring charges
2,478
—
Accrued contingent consideration
—
4,012
Other accrued expenses
3,068
3,086
$
50,836
$
55,342
Note 4—Acquisitions
High Precision Devises, Inc. (“HPD”) Acquisition
On October 19, 2020, we acquired 100% of the shares of HPD for total consideration of $16.9 million, net of cash acquired of $1.7 million, which included an adjustment for changes in working capital. This acquisition brought highly specialized skills and know-how to address the unique test challenges within the emerging quantum computing, superconducting computing, and ultra-sensitive sensor markets which operate at temperatures as low as 30 millikelvin.
The acquisition was accounted for using the acquisition method of accounting, with FormFactor treated as the acquirer. The acquired assets and liabilities of HPD were recorded at their respective fair values including an amount for goodwill representing the difference between the acquisition consideration and the fair value of the identifiable net assets.
Our Consolidated Statements of Income include the financial results of HPD subsequent to the acquisition date of October 19, 2020. Revenue in fiscal 2020 related to HPD subsequent to the acquisition date that was included in our Consolidated Statements of Income was not material.
The acquisition price was allocated to the tangible and identified intangible assets acquired and liabilities assumed as of the closing date of the acquisition based upon their respective fair values. The fair values assigned to assets acquired and liabilities assumed were based on management’s assumptions as of the acquisition date. We subsequently made certain immaterial adjustments within the measurement period to the acquisition price allocation as a result of finalization of our valuation of identifiable assets and liabilities. The purchase price allocated to the underlying assets acquired, including goodwill and intangibles, and liabilities assumed based on the final amounts are as follows (in thousands):`
61
FORMFACTOR, INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
Amount
Cash and cash equivalents
$
1,680
Accounts receivable
1,017
Inventory
3,047
Property, plant and equipment
669
Operating lease, right-of-use-assets
2,554
Prepaid expenses and other assets
916
Tangible assets acquired
9,883
Deferred revenue
(2,529)
Accounts payable and accrued liabilities
(1,268)
Operating lease liabilities
(2,554)
Deferred tax liability
(2,400)
Total net tangible assets acquired and liabilities assumed
1,132
Intangible assets
11,520
Goodwill
5,908
Net assets acquired
$
18,560
The intangible assets as of the acquisition date included (in thousands):
Amount
Weighted Average Useful Life (in years)
Developed technologies
$
7,500
10.0
Customer relationships
3,600
5.0
Order backlog
200
0.5
Trade names
220
5.0
Total intangible assets
$
11,520
8.2
The fair value of the intangible assets acquired in connection with the acquisition were determined using either the income, market or replacement cost methodologies. The intangible assets are being amortized over periods which reflect the pattern in which economic benefits of the assets are expected to be realized.
Identifiable Intangible Assets
Valuation of intangible assets involves multiple assumptions. The key assumptions are described below.
Developed technologies acquired primarily consist of existing technology related to cryogenic probe stations, Adiabatic Demagnetization Refrigerator (“ADR”), and continuous ADR cryostats and similar tools, and technology related to other cryogenic applications. We valued the developed technologies using the multi-period excess earnings method under the income approach. Using this approach, the estimated fair values were calculated using expected future cash flows from specific products discounted to their net present values at an appropriate risk-adjusted rate of return.
Customer relationships represent the fair value of future projected revenues that will be derived from the sale of products to HPD's existing customers. We valued customer relationships using the incremental cash flow method. This method estimates value based on the incremental cash flow afforded by having the customers relationships in place on the acquisition date versus having no relationships in place and needing to replicate or replace those relationships. The incremental cash flows are then discounted to a present value to arrive at an estimate of fair value for this asset class.
Order backlog represents business under existing contractual obligations. Expected cash flow from order backlog was valued on a discounted direct cash flow basis, net of returns on contributory assets such as working capital, property and equipment, trade name and assembled workforce.
The identified trade names intangibles relate to the estimated fair value of future cash flows related to the HPD brand. We valued trade names by applying the relief-from-royalty method under the income approach. This method is based on the application of a royalty rate to forecasted revenue under the trade name.
62
FORMFACTOR, INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
Goodwill
The excess of purchase price over the fair value assigned to the assets acquired and liabilities assumed represents the amount of goodwill resulting from the acquisition. We believe the factors that contributed to goodwill include synergies that are specific to our consolidated business, such as cost savings and operational efficiencies, and the acquisition of a talented workforce that expands our expertise in business development and commercializing semiconductor test products, none of which qualify for recognition as a separate intangible asset. We do not expect any portion of this goodwill to be deductible for tax purposes. The goodwill attributable to the acquisition was recorded as a non-current asset and is not amortized, but is subject to an annual review for impairment.
The goodwill arising from the acquisition was allocated to the HPD reporting unit within the Systems reportable segment.
We have not presented unaudited combined pro forma financial information as the HPD acquisition was not significant to our consolidated results of operations and financial position.
Baldwin Park Acquisition
On July 30, 2020, we acquired the probe card assets of Advantest Corporation for total cash consideration of $35.0 million. This acquisition brought important enabling technologies and capabilities for designing and manufacturing advanced probe cards, and adds a complementary 3D-NAND Flash probe-card product that is qualified and in production at one of the world's leading NAND Flash manufacturers.
The acquisition was accounted for using the acquisition method of accounting, with FormFactor treated as the acquirer. The acquired assets and liabilities of Baldwin Park were recorded at their respective fair values including an amount for goodwill representing the difference between the acquisition consideration and the fair value of the identifiable net assets.
Our Consolidated Statements of Income include the financial results of Baldwin Park subsequent to the acquisition date of July 30, 2020. Revenue in fiscal 2020 related to Baldwin Park subsequent to the acquisition date that was included in our Consolidated Statements of Income was not material.
The acquisition price was allocated to the tangible and identified intangible assets acquired and liabilities assumed as of the closing date of the acquisition based upon their respective fair values. The fair values assigned to assets acquired and liabilities assumed were based on management’s assumptions as of the acquisition date. We subsequently made certain immaterial adjustments within the measurement period to the acquisition price allocation as a result of finalization of our valuation of identifiable assets and liabilities. The purchase price allocated to the underlying assets acquired, including goodwill and intangibles, and liabilities assumed based on the final amounts are as follows (in thousands):
Amount
Accounts receivable
$
4,365
Inventory
2,727
Property, plant and equipment
9,053
Operating lease, right-of-use-assets
519
Prepaid expenses and other assets
56
Tangible assets acquired
16,720
Accounts payable and accrued liabilities
(743)
Operating lease liabilities
(519)
Total net tangible assets acquired and liabilities assumed
15,458
Intangible assets
13,600
Goodwill
5,942
Net assets acquired
$
35,000
63
FORMFACTOR, INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
The intangible assets as of the acquisition date included (in thousands):
Amount
Weighted Average Useful Life (in years)
Developed technologies
$
8,800
10.0
Customer relationships
4,400
3.0
In-process research and development
400
N/A
Total intangible assets
$
13,600
7.7
The fair value of the intangible assets acquired in connection with the acquisition were determined using either the income, market or replacement cost methodologies. The intangible assets are being amortized over periods which reflect the pattern in which economic benefits of the assets are expected to be realized.
Identifiable Intangible Assets
Valuation of intangible assets involves multiple assumptions. The key assumptions are described below.
Developed technologies acquired consists of existing technology related to 3D NAND Flash probe cards and the value of cost savings expected to be derived from Low Temperature Co-fired Ceramic (“LTCC”) technology. We valued the developed technology related to 3D NAND Flash using the multi-period excess earnings method under the income approach. Using this approach, the estimated fair values were calculated using expected future cash flows from specific products discounted to their net present values at an appropriate risk-adjusted rate of return. We valued the LTCC developed technology asset using the incremental cash flow method. This method estimates value based on the incremental cash flow afforded by having the LTCC capability in place on the acquisition date versus having no capability in place and needing to replicate or replace that capability. The incremental cash flows are then discounted to a present value to arrive at an estimate of fair value for this asset class.
In-process research and development (“IPR&D”) acquired primarily consists of research and development projects that were in process at the time of acquisition related to technologies used in DRAM probe cards. Once these projects are complete they will be placed in developed technologies and amortized over their useful lives. We valued the IPR&D using the multi-period excess earnings method under the income approach. Using this approach, the estimated fair values were calculated using expected future cash flows from specific products discounted to their net present values at an appropriate risk-adjusted rate of return.
Customer relationships represent the fair value of future projected revenues that will be derived from the sale of products to Baldwin Park's existing customers. We valued customer relationships using the incremental cash flow method. This method estimates value based on the incremental cash flow afforded by having the customers relationships in place on the acquisition date versus having no relationships in place and needing to replicate or replace those relationships. The incremental cash flows are then discounted to a present value to arrive at an estimate of fair value for this asset class.
Goodwill
The excess of purchase price over the fair value assigned to the assets acquired and liabilities assumed represents the amount of goodwill resulting from the acquisition. We believe the factors that contributed to goodwill include synergies that are specific to our consolidated business, such as cost savings and operational efficiencies, and the acquisition of a talented workforce that expands our expertise in business development, none of which qualify for recognition as a separate intangible asset. We expect this goodwill to be deductible for tax purposes. The goodwill attributable to the acquisition was recorded as a non-current asset and is not amortized, but is subject to an annual review for impairment.
The goodwill arising from the acquisition was allocated to the Probe Cards reporting unit within the Probe Cards reportable segment.
We have not presented unaudited combined pro forma financial information as the Baldwin Park acquisition was not significant to our consolidated results of operations and financial position.
FRT GmbH Acquisition
On October 9, 2019, we acquired 100% of the shares of FRT, a German-based company, for total consideration of $26.9 million, net of cash acquired of $1.7 million. The fair value of the purchase consideration was comprised of a $22.2 million cash payment and $6.5 million of contingent consideration. The contingent consideration was a cash amount equal to 1.5x Earnings Before Interest and Tax (“EBIT”) as defined in the purchase agreement, from a minimum of zero up to a maximum of €10.3 million, payable subject to the performance of the acquired business in calendar 2020. We estimated the fair value of
64
FORMFACTOR, INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
contingent consideration using a probability weighted approach. Key assumptions in determining the fair value of contingent consideration include estimating the probability of achieving certain EBIT levels and discounting at an appropriate discount rate. See Note 9, Fair Value, for additional information. This acquisition strengthened our leadership in test and measurement by expanding our addressable market into 3D hybrid surface metrology and extending the optical applications scope of our existing Systems segment.
The acquisition was accounted for using the acquisition method of accounting, with FormFactor treated as the acquirer. The acquired assets and liabilities of FRT were recorded at their respective fair values including an amount for goodwill representing the difference between the acquisition consideration and the fair value of the identifiable net assets.
Our Consolidated Statements of Income include the financial results of FRT subsequent to the acquisition date of October 9, 2019. Revenue in fiscal 2019 related to FRT subsequent to the acquisition date that was included in our Consolidated Statements of Income was not material.
Separate from the purchase agreement, we entered into a term loan agreement with a lender for an aggregate amount of $23.4 million to finance the acquisition. See Note 5, Debt, for additional information.
The acquisition price was allocated to the tangible and identified intangible assets acquired and liabilities assumed as of the closing date of the acquisition based upon their respective fair values. The fair values assigned to assets acquired and liabilities assumed were based on management’s assumptions as of the reporting date. We have finalized our allocation of the assets acquired, including goodwill and intangibles, and liabilities assumed for the purchase as follows (in thousands):
Amount
Cash and cash equivalents
$
1,687
Accounts receivable
3,079
Inventory
2,643
Property, plant and equipment
696
Operating lease, right-of-use-assets
335
Prepaid expenses and other assets
838
Tangible assets acquired
9,278
Customer deposits
(1,933)
Accounts payable and accrued liabilities
(1,182)
Operating lease liabilities
(335)
Deferred tax liabilities
(5,757)
Total net tangible assets acquired and liabilities assumed
71
Intangible assets
17,429
Goodwill
11,123
Net assets acquired
$
28,623
The intangible assets as of the closing date of the acquisition included (in thousands):
Amount
Weighted Average Useful Life (in years)
Developed technologies
$
12,505
8.0
Customer relationships
3,071
6.0
Order backlog
1,645
0.5
Trade names
208
2.0
Total intangible assets
$
17,429
6.9
The fair value of the intangible assets acquired in connection with the acquisition were determined using either the income, market or replacement cost methodologies. The intangible assets are being amortized over periods which reflect the pattern in which economic benefits of the assets are expected to be realized.
Identifiable Intangible Assets
Valuation of intangible assets involves multiple assumptions. The key assumptions are described below.
65
FORMFACTOR, INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
Developed technologies acquired primarily consist of existing technology related to hybrid 3D surface metrology measurement equipment. We valued the developed technologies using the multi-period excess earnings method under the income approach. Using this approach, the estimated fair values were calculated using expected future cash flows from specific products discounted to their net present values at an appropriate risk-adjusted rate of return.
Customer relationships represent the fair value of future projected revenues that will be derived from the sale of products to FRT's existing customers. We valued customer relationships using the incremental cash flow method. This method estimates value based on the incremental cash flow afforded by having the customers relationships in place on the acquisition date versus having no relationships in place and needing to replicate or replace those relationships. The incremental cash flows are then discounted to a present value to arrive at an estimate of fair value for this asset class.
Order backlog represents business under existing contractual obligations. Expected cash flow from order backlog was valued on a direct cash flow basis.
The identified trade names intangibles relate to the estimated fair value of future cash flows related to the FRT brand. We valued trade names by applying the relief-from-royalty method under the income approach. This method is based on the application of a royalty rate to forecasted revenue under the trade name.
Goodwill
The excess of purchase price over the fair value assigned to the assets acquired and liabilities assumed represents the amount of goodwill resulting from the acquisition. We believe the factors that contributed to goodwill include synergies that are specific to our consolidated business, such as cost savings and operational efficiencies, and the acquisition of a talented workforce that expands our expertise in business development and commercializing semiconductor test products, none of which qualify for recognition as a separate intangible asset. We do not expect any portion of this goodwill to be deductible for tax purposes. The goodwill attributable to the acquisition was recorded as a non-current asset and is not amortized, but is subject to an annual review for impairment.
The goodwill arising from the acquisition was allocated to the FRT reporting unit within the Systems reportable segment.
We have not presented unaudited combined pro forma financial information as the FRT acquisition was not significant to our consolidated results of operations and financial position.
Note 5—Debt
Our debt consisted of the following (in thousands):
December 25, 2021
December 26, 2020
Term loans
$
24,435
$
34,569
Less unamortized issuance costs
(70)
(75)
Term loans less issuance costs
$
24,365
$
34,494
CMI Term Loan
On June 24, 2016, we entered into a Credit Agreement (the “Credit Agreement”) with HSBC Bank USA, National Association (“HSBC”), as administrative agent, co-lead arranger, sole bookrunner and syndication agent, other lenders that may from time-to-time be a party to the Credit Agreement, and certain guarantors. Pursuant to the Credit Agreement, the lenders provided us with a senior secured term loan facility of $150 million (the “CMI Term Loan”). The proceeds of the CMI Term Loan were used to finance a portion of the purchase price paid in connection with the Cascade Microtech acquisition in fiscal 2016 and to pay related bank fees and expenses.
The CMI Term Loan bore interest at a rate equal to, at our option, (i) the applicable London Interbank Offered Rate (“LIBOR”) rate plus 2.00% per annum or (ii) Base Rate (as defined in the Credit Agreement) plus 1.00% per annum. We elected to pay interest at 2.00% over the one-month LIBOR rate. Interest payments were payable in quarterly installments over a five-year period.
The principal payments on the CMI Term Loan were scheduled to be paid in equal quarterly installments that began June 30, 2016, in an annual amount equal to 5% for year one, 10% for year two, 20% for year three, 30% for year four and 35% for year
66
FORMFACTOR, INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
five. We accelerated payments of these scheduled amounts and made the final payment on the CMI Term Loan on June 30, 2020, approximately one year before the original maturity. We are no longer subject to the terms of the Credit Agreement.
FRT Term Loan
On October 25, 2019, we entered into a euro denominated $23.4 million three-year credit facility loan agreement (the “FRT Term Loan”) with HSBC Trinkaus & Burkhardt AG, Germany, to fund the acquisition of FRT GmbH, which we acquired on October 9, 2019. See Note 4, Acquisitions, for further details of the acquisition.
The FRT Term Loan bears interest at a rate equal to the Euro Interbank Offered Rate (“EURIBOR”) plus 1.75 % per annum and will be repaid in quarterly installments of approximately $2.0 million plus interest. The interest rate at December 25, 2021 was 1.20%.
The obligations under the FRT Term Loan are fully and unconditionally guaranteed by FormFactor, Inc. The FRT Term Loan contains negative covenants customary for financing of this type, including covenants that place limitations on the incurrence of additional indebtedness, the creation of liens, the payment of dividends; dispositions; fundamental changes, including mergers and acquisitions; loans and investments; sale leasebacks; negative pledges; transactions with affiliates; changes in fiscal year; sanctions and anti-bribery laws and regulations, and modifications to charter documents in a manner materially adverse to the Lenders. The FRT Term Loan also contains affirmative covenants and representations and warranties customary for financing of this type. As of December 25, 2021, the balance outstanding pursuant to the FRT term loan was $7.9 million.
Building Term Loan
On June 22, 2020, we entered into an $18.0 million 15-year credit facility loan agreement (the “Building Term Loan”) with MUFG Union Bank, National Association (“Union Bank”). The proceeds of the Building Term Loan were used to purchase a building adjacent to our leased facilities in Livermore, California.
The Building Term Loan bears interest at a rate equal to the applicable LIBOR rate plus 1.75% per annum. Interest payments are payable in monthly installments over a fifteen-year period. The interest rate at December 25, 2021 was 1.85%.
On March 17, 2020, we entered into an interest rate swap agreement with Union Bank to hedge the interest payments on the Building Term Loan for the notional amount of $18.0 million. As future levels of LIBOR over the life of the loan are uncertain, we entered into this interest-rate swap agreement to hedge the exposure in interest rate risks associated with movement in LIBOR rates. By entering into the agreement, we convert a floating rate interest at one-month LIBOR plus 1.75% into a fixed rate interest at 2.75%. The interest rate swap included a 0% floor that was effective for one year from the date of the swap. As of December 25, 2021, the notional amount of the loan that is subject to this interest rate swap is $16.5 million. See Note 9, Fair Value, for additional information.
The obligations under the Building Term Loan are guaranteed by a deed of trust covering certain real property and improvements and certain personal property used in connection therewith. The deed of trust creates a first priority lien or encumbrance on the property with only such exceptions as may be approved by the Union Bank in writing.
The Credit Agreement contains covenants customary for financing of this type. As of December 25, 2021, the balance outstanding pursuant to the Building Term Loan was $16.5 million.
Future principal and interest payments on our term loans as of December 25, 2021, based on the interest rate in effect at that date were as follows (in thousands):
Payments Due In Fiscal Year
2022
2023
2024
2025
2026
2027 and thereafter
Total
Term loans - principal payments
$
8,935
$
1,050
$
1,080
$
1,111
$
1,142
$
11,117
$
24,435
Term loans - interest payments(1)
361
282
263
240
220
930
2,296
$
9,296
$
1,332
$
1,343
$
1,351
$
1,362
$
12,047
$
26,731
(1) Represents our minimum interest payment commitments at 1.20% per annum for the FRT Term Loan and 1.85% per annum for the Building Term Loan.
67
FORMFACTOR, INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
Note 6—Leases
Our operating lease, right-of-use assets relate to real estate space under non-cancelable operating lease agreements for commercial and industrial space, as well as for our corporate headquarters located in Livermore, California. Our leases have remaining terms of 1 to 7 years, and some leases include options to extend up to 20 years. We also have operating leases for automobiles with remaining lease terms of 1 to 3 years. We did not include any of our renewal options in our lease terms for calculating our lease liability as the renewal options allow us to maintain operational flexibility and we are not reasonably certain we will exercise these options at this time. The weighted-average remaining lease term for our operating leases was 5.4 years at December 25, 2021 and the weighted-average discount rate was 3.74%.
The components of lease expense were as follows (in thousands):
Lease Expense
December 25, 2021
December 26, 2020
December 28, 2019
Operating lease expense
$
8,485
$
7,468
$
6,985
Short-term lease expense
180
136
142
Variable lease expense
1,842
1,574
1,286
$
10,507
$
9,178
$
8,413
Future minimum payments under our non-cancelable operating leases were as follows as of December 25, 2021 (in thousands):
Fiscal Year
Amount
2022
$
8,594
2023
7,232
2024
6,814
2025
6,799
2026
6,008
Thereafter
8,970
Total minimum lease payments
44,417
Less: interest
(5,507)
Present value of net minimum lease payments
38,910
Less: current portion
(7,901)
Total long-term operating lease liabilities
$
31,009
Note 7—Restructuring Charges
On September 25, 2021, we adopted restructuring plans to improve our business effectiveness and streamline our operations by consolidating certain manufacturing facilities for both the Probe Cards segment and the Systems segment. This includes plans to consolidate or relocate certain leased locations in the United States to other locations in the United States, Germany and Asia. As a result of these changes to certain work locations, we have incurred, and expect to incur, personnel related costs to sever, relocate, or retain select employees. Additionally, as part of these plans we are undertaking actions to adjust capacity for certain product offerings. Contract termination costs include charges to satisfy contract obligations. The amounts accrued are based on our best estimates, however it is reasonably possible that the final amount paid or incurred will differ from the amount estimated in the near term. We expect the actions defined under these plans will be largely completed by the end of December 2022, except facilities charges which may extend beyond that time.
This plan is expected to result in FormFactor recording restructuring and other charges in the aggregate amount of approximately $6.0 million to $9.0 million, estimated to be comprised primarily of $1.0 million to $2.0 million of severance and employee-related costs, $2.0 million to 3.0 million in contract and lease termination costs, $1.0 million to $1.5 million in inventory impairments, and $2.0 million to $2.5 million of cost related to impairment of leasehold improvements, facility exits, and other costs. Approximately $3.0 million to $4.5 million and $3.0 million to $4.5 million is expected within the Probe Cards segment and Systems segment, respectively.
68
FORMFACTOR, INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
Restructuring charges by reportable segment included in our Consolidated Statements of Income were as follows (in thousands):
Fiscal Year Ended
December 25, 2021
Probe Cards
Systems
Total
Cost of revenues
$
2,720
$
485
$
3,205
Research and development
—
869
869
Selling, general and administrative
—
50
50
$
2,720
$
1,404
$
4,124
Changes to the restructuring accrual during December 25, 2021 were as follows (in thousands):
Employee Severance and Benefits
Inventory Impairments
Property and Equipment Impairments
Contract Termination Costs
Total
December 26, 2020
$
—
$
—
$
—
$
—
$
—
Restructuring charges
1,175
1,376
270
2,800
5,621
Adjustment to restructuring charges
(147)
—
—
(1,350)
(1,497)
Non-cash settlement
—
(1,376)
(270)
—
(1,646)
December 25, 2021
$
1,028
$
—
$
—
$
1,450
$
2,478
Note 8—Derivative Financial Instruments
Foreign Exchange Derivative Contracts
We operate and sell our products in various global markets. As a result, we are exposed to changes in foreign currency exchange rates. We utilize foreign currency forward contracts to hedge against future movements in foreign exchange rates that affect certain existing foreign currency denominated assets and liabilities and forecasted foreign currency revenue and expense transactions. Under this program, our strategy is to have increases or decreases in our foreign currency exposures mitigated by gains or losses on the foreign currency forward contracts in order to mitigate the risks and volatility associated with foreign currency transaction gains or losses.
We do not use derivative financial instruments for speculative or trading purposes. For accounting purposes, certain of our foreign currency forward contracts are not designated as hedging instruments and, accordingly, we record the fair value of these contracts as of the end of our reporting period in our Consolidated Balance Sheets with changes in fair value recorded within Other income, net in our Consolidated Statements of Income for both realized and unrealized gains and losses. Certain of our foreign currency forward contracts are designated as cash flow hedges, and, accordingly, we record the fair value of these contracts as of the end of our reporting period in our Consolidated Balance Sheets with changes in fair value recorded as a component of Accumulated other comprehensive income (loss) and reclassified into earnings in the same period in which the hedged transaction affects earnings, and in the same line item on the Consolidated Statements of Income as the impact of the hedge transaction. At December 25, 2021, we expect to reclassify $0.5 million of the amount accumulated in other comprehensive loss to earnings during the next 12 months, due to the recognition in earnings of the hedged forecasted transactions.
The fair value of our foreign exchange derivative contracts was determined based on current foreign currency exchange rates and forward points. All of our foreign exchange derivative contracts outstanding at December 25, 2021 will mature by the fourth quarter of fiscal 2022.
69
FORMFACTOR, INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
The following table provides information about our foreign currency forward contracts outstanding as of December 25, 2021 (in thousands):
Currency
Contract Position
Contract Amount (Local Currency)
Contract Amount (U.S. Dollars)
Euro
Buy
(9,774)
$
(11,579)
Euro
Sell
5,906
6,680
Japanese Yen
Sell
1,902,670
16,629
Korean Won
Buy
(1,901,547)
(1,603)
Taiwan Dollar
Sell
47,548
1,718
Total USD notional amount of outstanding foreign exchange contracts
$
11,845
Our foreign currency contracts are classified within Level 2 of the fair value hierarchy as they are valued using pricing models that utilize observable market inputs.
The location and amount of gains (losses) related to non-designated derivative instruments in the Consolidated Statements of Income were as follows (in thousands):
Location of Gain (Loss) Recognized on Derivatives
Fiscal Year Ended
Derivatives Not Designated as Hedging Instruments
December 25, 2021
December 26, 2020
December 28, 2019
Foreign exchange forward contracts
Other income, net
$
1,585
$
(1,437)
$
248
The location and amount of gains (losses) related to derivative instruments designated as cash flow hedges on our Consolidated Statements of Income was as follows (in thousands):
Amount of Gain or (Loss) Recognized in Accumulated OCI on Derivative
Location of Gain or (Loss) Reclassified from Accumulated OCI into Income
Amount of Gain or (Loss) Reclassified from Accumulated OCI into Income
Fiscal 2021
$
(1,096)
Cost of revenues
$
184
Research and development
3
Selling, general and administrative
64
$
251
Fiscal 2020
$
1,142
Cost of revenues
$
89
Research and development
77
Selling, general and administrative
25
$
191
Fiscal 2019
$
93
Cost of revenues
$
(526)
Research and development
(75)
Selling, general and administrative
(172)
$
(773)
Interest Rate Swaps
Pursuant to our interest rate and risk management strategy, during fiscal 2016 we entered into an interest rate swap agreement with HSBC and other lenders to hedge the interest payments on the CMI Term Loan for the notional amount of $95.6 million. As future levels of LIBOR over the life of the loan were uncertain, we entered into these interest-rate swap agreements to hedge the exposure in interest rate risks associated with the movement in LIBOR rates. By entering into the agreements, we converted a floating rate interest at one-month LIBOR plus 2.00% into a fixed rate interest at 2.94%. The interest rate swap agreement ended as of March 28, 2020.
During fiscal 2020 we entered into an interest rate swap agreement with Union Bank to hedge the interest payments on the Building Term Loan for the notional amount of $18.0 million. As future levels of LIBOR over the life of the loan are uncertain, we entered into this interest-rate swap agreement to hedge the exposure in interest rate risks associated with movement in LIBOR rates. By entering into the agreement, we convert a floating rate interest at one-month LIBOR plus 1.75% into a fixed
70
FORMFACTOR, INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
rate interest at 2.75%. The interest rate swap also included a 0% floor that was effective for one year from the date of the swap. As of December 25, 2021, the notional amount of the loan that is subject to this interest rate swap was $16.5 million. See Note 5, Debt, for additional information.
For accounting purposes, the interest-rate swap contracts qualify for and are designated as cash flow hedges. All hedging relationships are formally documented, and the hedges are designed to offset changes to future cash flows on hedged transactions. We evaluate hedge effectiveness at hedge inception and on an ongoing basis.
The fair value of our interest rate swap contracts are determined at the end of each reporting period based on valuation models that use interest rate yield curves as inputs. The cash flows associated with the interest rate swaps are reported in Net cash provided by operating activities in our Consolidated Statements of Cash Flows and the fair value of the interest rate swap contracts are recorded within Accrued Liabilities and Other assets.
The impact of the interest rate swaps on the Consolidated Statements of Income was as follows (in thousands):
Amount of Gain or (Loss) Recognized in OCI on Derivative (Effective Portion)
Location of Gain or (Loss) Reclassified from Accumulated OCI into Income (Effective Portion)
Amount of Gain or (Loss) Reclassified from Accumulated OCI into Income (Effective Portion)
Fiscal 2021
$
451
Other income, net
$
(154)
Fiscal 2020
(119)
Other income, net
(64)
Fiscal 2019
(86)
Other income, net
548
See also Note 9, Fair Value.
Note 9—Fair Value
Whenever possible, the fair values of our financial assets and liabilities are determined using quoted market prices of identical securities or quoted market prices of similar securities from active markets. The three levels of inputs that may be used to measure fair value are as follows:
•Level 1 valuations are obtained from real-time quotes for transactions in active exchange markets involving identical securities;
•Level 2 valuations utilize significant observable inputs, such as quoted prices for similar assets or liabilities, quoted prices near the reporting date in markets that are less active, or other inputs that are observable or can be corroborated by observable market data for substantially the full term of the assets or liabilities; and
•Level 3 valuations utilize unobservable inputs to the valuation methodology and include our own data about assumptions market participants would use in pricing the asset or liability based on the best information available under the circumstances.
We did not have any transfers of assets or liabilities measured at fair value on a recurring basis to or from Level 1, Level 2 or Level 3 during fiscal 2021, 2020 or 2019.
The carrying values of Cash, Accounts receivable, net, Restricted cash, Prepaid expenses and other current assets, Accounts payable, Accrued liabilities, and Current portion of term loans, net of unamortized issuance costs approximate fair value due to their short maturities.
No changes were made to our valuation techniques during fiscal 2021.
Cash Equivalents
The fair value of our cash equivalents is determined based on quoted market prices for similar or identical securities.
Marketable Securities
We classify our marketable securities as available-for-sale and value them utilizing a market approach. Our investments are priced by pricing vendors who provide observable inputs for their pricing without applying significant judgment. Broker pricing is used mainly when a quoted price is not available, the investment is not priced by our pricing vendors or when a broker price is more reflective of fair value. Our broker-priced investments are categorized as Level 2 investments because fair value is based on similar assets without applying significant judgments. In addition, all of our investments have a sufficient level of trading volume to demonstrate that the fair value is appropriate.
71
FORMFACTOR, INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
Contingent Consideration
Contingent consideration, arising from the acquisition of FRT (see Note 4, Acquisitions), was a cash amount equal to 1.5x EBIT as defined in the purchase agreement, up to a maximum of €10.3 million, payable subject to the performance of the acquired business in calendar 2020. We estimated the fair value of contingent consideration using a probability weighted approach. Key assumptions in determining the fair value of contingent consideration included estimating EBIT levels that we believed as of the acquisition date were likely to be achieved during the performance period, discounted to present value at an appropriate discount rate. In the second quarter of fiscal 2021, we paid $3.9 million in contingent consideration in satisfaction of our obligation under the purchase agreement, resulting in a $0.1 million credit to Selling, general and administrative expense with the remaining change from December 26, 2020 resulting from foreign currency translation.
Assets and liabilities Measured at Fair Value on a Recurring Basis
Assets and liabilities measured at fair value on a recurring basis were as follows (in thousands):
December 25, 2021
Level 1
Level 2
Level 3
Total
Assets:
Cash equivalents:
Money market funds
$
9,526
$
—
$
—
$
9,526
U.S. treasuries
2,500
—
—
2,500
Commercial paper
—
1,000
—
1,000
U.S. agency securities
—
5,556
—
5,556
12,026
6,556
—
18,582
Marketable securities:
U.S. treasuries
38,985
—
—
38,985
Certificates of deposit
—
1,199
—
1,199
Corporate bonds
—
52,709
—
52,709
Commercial paper
—
32,162
—
32,162
38,985
86,070
—
125,055
Interest rate swap derivative contracts
—
629
—
629
Total assets
$
51,011
$
93,255
$
—
$
144,266
Liabilities:
Foreign exchange derivative contracts
$
—
$
(489)
$
—
$
(489)
Interest rate swap derivative contracts
—
(55)
—
(55)
Total liabilities
$
—
$
(544)
$
—
$
(544)
December 26, 2020
Level 1
Level 2
Level 3
Total
Assets:
Cash equivalents:
Money market funds
$
43,019
$
—
$
—
$
43,019
Marketable securities:
U.S. Treasuries
40,726
—
—
40,726
Certificates of deposit
—
2,179
—
2,179
Agency securities
—
575
—
575
Corporate bonds
—
24,330
—
24,330
40,726
27,084
—
67,810
Foreign exchange derivative contract
—
1,057
—
1,057
Interest rate swap derivative contracts
—
57
—
57
Total assets
$
83,745
$
28,198
$
—
$
111,943
Liabilities:
Interest rate swap derivative contracts
$
—
$
(87)
$
—
$
(87)
Contingent consideration
—
—
(4,012)
(4,012)
Total liabilities
$
—
$
(87)
$
(4,012)
$
(4,099)
72
FORMFACTOR, INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
Assets and Liabilities Measured at Fair Value on a Non-Recurring Basis
We measure and report our non-financial assets such as Property, plant and equipment, Goodwill and Intangible assets at fair value on a non-recurring basis if we determine these assets to be impaired or in the period when we make a business acquisition. Other than as discussed in Note 4, Acquisitions and Note 7, Restructuring Charges, there were no assets or liabilities measured at fair value on a non-recurring basis during fiscal 2021, 2020 or 2019.
Note 10—Goodwill and Intangible Assets
Goodwill
Goodwill by reportable segment was as follows (in thousands):
Probe Cards
Systems
Total
Goodwill, as of December 28, 2019
$
172,482
$
26,714
$
199,196
Addition - FRT acquisition
—
975
975
Addition - Baldwin Park acquisition
5,590
—
5,590
Addition - HPD acquisition
—
4,654
4,654
Foreign currency translation
—
2,346
2,346
Goodwill, as of December 26, 2020
178,072
34,689
212,761
Addition - Baldwin Park acquisition
352
—
352
Addition - HPD acquisition
—
1,254
1,254
Foreign currency translation
—
(2,068)
(2,068)
Goodwill, as of December 25, 2021
$
178,424
$
33,875
$
212,299
Intangible Assets
Intangible assets were as follows (in thousands):
December 25, 2021
December 26, 2020
Other Intangible Assets
Gross
Accumulated Amortization
Net
Gross
Accumulated Amortization
Net
Existing developed technologies
$
172,259
$
148,784
$
23,475
$
176,265
$
137,754
$
38,511
Trade name
8,054
7,603
451
8,162
7,363
799
Customer relationships
51,270
39,254
12,016
52,488
33,378
19,110
Backlog
1,896
1,896
—
2,227
1,900
327
In-process research and development
400
—
400
400
—
400
$
233,879
$
197,537
$
36,342
$
239,542
$
180,395
$
59,147
Amortization expense was included in our Consolidated Statements of Income as follows (in thousands):
Fiscal Year Ended
December 25, 2021
December 26, 2020
December 28, 2019
Cost of revenues
$
12,269
$
21,609
$
20,036
Selling, general and administrative
6,478
6,382
7,636
$
18,747
$
27,991
$
27,672
73
FORMFACTOR, INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
The estimated future amortization of definite-lived intangible assets, excluding in-process research and development, is as follows (in thousands):
Fiscal Year
Amount
2022
$
9,488
2023
7,133
2024
4,533
2025
4,277
2026
3,241
Thereafter
7,270
Total
$
35,942
We did not record any impairment of intangible assets in fiscal 2021, 2020 and 2019.
Note 11—Commitments and Contingencies
Leases
See Note 6, Leases.
Environmental Matters
We are subject to U.S. federal, state, local, and foreign governmental laws and regulations relating to the protection of the environment, including those governing the discharge of pollutants into the air and water, the management and disposal of hazardous substances and wastes, the clean-up of contaminated sites and the maintenance of a safe workplace. We believe that we comply in all material respects with the environmental laws and regulations that apply to us. We did not receive any notices of violations of environmental laws and regulations in fiscal 2021, 2020 or 2019. In the future, we may receive notices of violations of environmental regulations, or otherwise learn of such violations. Environmental contamination or violations may negatively impact our business.
Indemnification Arrangements
We have entered, and may from time to time in the ordinary course of our business enter, into contractual arrangements with third parties that include indemnification obligations. Under these contractual arrangements, we have agreed to defend, indemnify and/or hold the third party harmless from and against certain liabilities. These arrangements include indemnities in favor of customers in the event that our products or services infringe a third party's intellectual property or cause property or other indemnities in favor of our lessors in connection with facility leasehold liabilities that we may cause. In addition, we have entered into indemnification agreements with our directors and certain of our officers, and our bylaws contain indemnification obligations in favor of our directors, officers and agents. These indemnity arrangements may limit the type of the claim, the total amount that we can be required to pay in connection with the indemnification obligation and the time within which an indemnification claim can be made. The duration of the indemnification obligation may vary, and for most arrangements, survives the agreement term and is indefinite. We believe that substantially all of our indemnity arrangements provide either for limitations on the maximum potential future payments we could be obligated to make, or for limitations on the types of claims and damages we could be obligated to indemnify, or both. However, it is not possible to determine or reasonably estimate the maximum potential amount of future payments under these indemnification obligations due to the varying terms of such obligations, a lack of history of prior indemnification claims, the unique facts and circumstances involved in each particular contractual arrangement and in each potential future claim for indemnification, and the contingency of any potential liabilities upon the occurrence of events that are not reasonably determinable. We have not had any material requests for indemnification under these arrangements. We have not recorded any liabilities for these indemnification arrangements on our Consolidated Balance Sheets as of December 25, 2021 or December 26, 2020.
Legal Matters
From time to time, we may be subject to legal proceedings and claims in the ordinary course of business. As of December 25, 2021, and as of the filing of these financial statements, we were not involved in any material legal proceedings. In the future, we may become a party to additional legal proceedings that may require us to spend significant resources. Litigation can be expensive and disruptive to normal business operations. The results of legal proceedings are difficult to predict, and the costs incurred in litigation can be substantial, regardless of outcome.
74
FORMFACTOR, INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
Note 12—Stockholders' Equity
Preferred Stock
We have authorized 10,000,000 shares of undesignated preferred stock, $0.001 par value, none of which is issued and outstanding. Our Board of Directors shall determine the rights, preferences, privileges and restrictions of the preferred stock, including dividends rights, conversion rights, voting rights, terms of redemption, liquidation preferences, sinking fund terms and the number of shares constituting any series or the designation of any series.
Common Stock
Each share of common stock has the right to one vote. The holders of common stock are also entitled to receive dividends whenever funds are legally available and when declared by the Board of Directors, subject to the prior rights of holders, if any, of all classes of stock outstanding having priority rights as to dividends. No dividends have been declared or paid as of December 25, 2021.
Common Stock Repurchase Program
On October 26, 2020, our Board of Directors authorized a program to repurchase up to $50 million of outstanding common stock to offset potential dilution from issuances of common stock under our stock-based incentive plans. The share repurchase program will expire October 28, 2022. This repurchase program replaced the previous repurchase program that expired in February 2020 to purchase up to $25.0 million of outstanding common stock. During fiscal 2021, we repurchased and retired 622,400 shares of common stock for $24.0 million and, as of December 25, 2021 $26.0 million remained available for future repurchases. During fiscal 2020 and 2019, we did not repurchase any shares.
Equity Incentive Plan
We currently grant equity-based awards under our Equity Incentive Plan, as amended (the “2012 Plan”) which was approved by our stockholders. As amended, the 2012 Plan has authorized for issuance a total of 23.4 million shares, 4.5 million of which were available for grant as of December 25, 2021.
RSUs granted under the 2012 Plan generally vest over three years in annual tranches, though we have granted, and will continue to grant, such awards that vest over a shorter term for employee retention purposes.
The 2012 Plan provides that incentive stock options may be granted to our employees and nonqualified stock options, and all awards other than incentive stock options, may be granted to employees, directors and consultants. The exercise price of incentive stock options must be at least equal to the fair market value of our common stock on the date of grant. All restricted stock units and options granted under the 2012 Plan generally vest over three years and options expire after seven years, unless otherwise determined by the Compensation Committee of the Board of Directors.
Stock Options
Stock option activity was as follows:
Outstanding Options
Number of Shares
Weighted Average Exercise Price
Weighted Average Remaining Contractual Life in Years
Aggregate Intrinsic Value
Outstanding at December 26, 2020
106,000
$
8.35
Options exercised
(100,000)
8.44
Outstanding at December 25, 2021
6,000
$
6.93
0.6
$
225,480
Vested and expected to vest at December 25, 2021
6,000
$
6.93
0.6
$
225,480
Exercisable at December 25, 2021
6,000
$
6.93
0.6
$
225,480
75
FORMFACTOR, INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
Restricted Stock Units
RSUs, including Performance Restricted Stock Units (“PRSUs”) are converted into shares of our common stock upon vesting on a one-for-one basis. The vesting of RSUs is subject to the employee's continuing service. RSU activity was as follows:
Number of Shares
Weighted Average Grant Date Fair Value
Restricted stock units at December 26, 2020
2,840,922
$
19.80
Granted
1,036,537
36.12
Vested
(1,517,402)
17.26
Canceled
(193,123)
28.28
Restricted stock units at December 25, 2021
2,166,934
28.63
The PRSUs granted in fiscal 2021, 2020 and 2019 listed below vest based on us achieving certain market performance criteria. The performance criteria are based on a metric called Total Shareholder Return (“TSR”) for the performance period of three years, relative to the TSR of the companies identified as being part of the S&P Semiconductor Select Industry Index (FormFactor peer companies) as of a specific date.
All 318,100 PRSUs granted in fiscal 2018 vested in fiscal 2021. These shares achieved TSR performance that resulted in an additional 124,600 shares issued during fiscal 2021 related to the 2018 PRSU grant.
PRSU grant activity was as follows:
Fiscal Year Ended
December 25, 2021
December 26, 2020
December 28, 2019
Grant Date
August 2, 2021
August 27, 2020
June 4, 2019
Performance period
July 1, 2021 - June 30, 2024
July 1, 2020 - June 30, 2023
July 1, 2019 - June 30, 2022
Number of shares
197,128
258,000
273,000
TSR as-of date
August 2, 2021
August 27, 2020
June 4, 2019
Stock-based compensation
$8.6 million
$6.9 million
$4.4 million
Employee Stock Purchase Plan
Our 2012 Employee Stock Purchase Plan (the “ESPP”), as amended, allows for the issuance of a total of 7,000,000 shares. The offering periods under the ESPP are 12 months commencing on February 1 of each calendar year and ending on January 31 of the subsequent calendar year, and a six-month fixed offering period commencing on August 1 of each calendar year and ending on January 31 of the subsequent calendar year. The 12-month offering period consists of twosix-month purchase periods and the six-month offering period consists of onesix-month purchase period. The price of the common stock purchased is 85% of the lesser of the fair market value of the common stock on the first day of the applicable offering period or the last day of each purchase period. We have treated the 2012 ESPP as a compensatory plan.
During fiscal 2021, employees purchased 378,584 shares under this program at a weighted average exercise price of $25.91 per share, which represented a weighted average discount of $13.53 per share from the fair value of the stock purchased. As of December 25, 2021, 1,793,072 shares remained available for issuance.
76
FORMFACTOR, INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
Note 13—Stock-Based Compensation
Stock-Based Compensation Expense
Certain information regarding our stock-based compensation was as follows (in thousands, except per share amounts):
Fiscal Year Ended
December 25, 2021
December 26, 2020
December 28, 2019
Weighted average grant date per share fair value of RSUs granted
$
36.12
$
25.96
$
15.12
Total intrinsic value of stock options exercised
3,179
4,688
1,814
Fair value of RSUs vested
54,948
42,597
23,450
Pre-tax stock-based compensation expense by financial statement line and related tax benefit in the Consolidated Statements of Income are as follows (in thousands):
Fiscal Year Ended
December 25, 2021
December 26, 2020
December 28, 2019
Stock-based compensation expense included in:
Cost of revenues
$
5,200
$
3,951
$
4,055
Research and development
7,583
5,824
6,367
Selling, general and administrative
16,601
14,055
12,754
Total stock-based compensation
$
29,384
$
23,830
$
23,176
Stock-based compensation tax benefit
$
6,118
$
4,962
$
911
Unrecognized Stock-Based Compensation Expense
Unrecognized stock-based compensation expense at December 25, 2021 consisted of the following (in thousands):
Unrecognized Expense
Weighted Average Recognition Period (Years)
Restricted stock units
$
36,055
2.2
Performance restricted stock units
10,126
2.1
Employee stock purchase plan
452
0.1
Total unrecognized stock-based compensation expense
$
46,633
2.1
77
FORMFACTOR, INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
Valuation Assumptions
The following assumptions were used in estimating the fair value of PRSUs:
Fiscal Year Ended
December 25, 2021
December 26, 2020
December 28, 2019
PRSUs:
Dividend yield
—
%
—
%
—
%
Expected volatility
52.5
%
52.0
%
47.3
%
Risk-free interest rate
0.3
%
0.2
%
1.8
%
Expected life (in years)
2.9
2.8
3.1
The following assumptions were used in estimating the fair value of shares under the Employee Stock Purchase Plan:
Fiscal Year Ended
December 25, 2021
December 26, 2020
December 28, 2019
Employee Stock Purchase Plan:
Dividend yield
—
%
—
%
—
%
Expected volatility
33.6% - 74.4%
30.4% - 74.4%
36.6% - 59.5%
Risk-free interest rate
0.1% - 1.5%
0.1% - 1.5%
2.0% - 2.5%
Expected life (in years)
0.5 - 1.0
0.5 - 1.0
0.5 - 1.0
Note 14—Income Taxes
Components of Income Before Income Taxes
The components of income before income taxes were as follows (in thousands):
Fiscal Year Ended
December 25, 2021
December 26, 2020
December 28, 2019
United States
$
74,298
$
72,950
$
41,115
Foreign
24,202
12,225
9,948
$
98,500
$
85,175
$
51,063
Provision for Income Taxes
The components of the provision for income taxes are as follows (in thousands):
Fiscal Year Ended
December 25, 2021
December 26, 2020
December 28, 2019
Current provision:
Federal
$
2,334
$
1,799
$
179
State
712
1,194
2,302
Foreign
7,661
4,278
4,202
10,707
7,271
6,683
Deferred provision (benefit):
Federal
4,651
1,472
8,128
State
522
(267)
(1,898)
Foreign
(1,304)
(1,824)
(1,196)
3,869
(619)
5,034
Total provision for income taxes
$
14,576
$
6,652
$
11,717
78
FORMFACTOR, INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
Tax Rate Reconciliation
The following is a reconciliation of the difference between income taxes computed by applying the federal statutory rate of 21% and the provision from income taxes (in thousands):
Fiscal Year Ended
December 25, 2021
December 26, 2020
December 28, 2019
U.S. statutory federal tax rate
$
20,685
$
17,887
$
10,723
State taxes and credits, net of federal benefit
811
663
441
Stock-based compensation
(6,118)
(4,962)
(911)
Research and development credits
(7,153)
(6,576)
(6,436)
Foreign taxes at rates different than the U.S.
2,286
415
1,454
Other permanent differences
2,043
400
(148)
Global intangible low-taxed income
—
—
1,369
Foreign derived intangible income
(2,486)
(3,668)
—
Change in valuation allowance
2,231
1,862
2,567
Other
2,277
631
2,658
Total
$
14,576
$
6,652
$
11,717
Deferred Tax Assets and Liabilities
Deferred tax assets and liabilities are recognized for the future tax consequences of differences between the carrying amounts of assets and liabilities and their respective tax basis using enacted tax rates in effect for the year in which the differences are expected to be reversed.
Significant deferred tax assets and liabilities consisted of the following (in thousands):
As of
December 25, 2021
December 26, 2020
Tax credits
$
41,650
$
42,927
Inventory reserve
13,691
13,401
Other reserves and accruals
8,523
8,610
Non-statutory stock options
2,837
2,794
Lease liability
6,717
6,934
Depreciation and amortization
17,912
20,961
Net operating loss carryforwards
18,395
18,421
Gross deferred tax assets
109,725
114,048
Valuation allowance
(40,698)
(38,466)
Total deferred tax assets
69,027
75,582
Right of use asset
(5,910)
(6,074)
Acquired intangibles and fixed assets
(4,522)
(8,395)
Unrealized investment gains
(105)
(106)
Tax on undistributed earnings
(118)
(110)
Total deferred tax liabilities
(10,655)
(14,685)
Net deferred tax assets
$
58,372
$
60,897
We are required to evaluate the realizability of our deferred tax assets in both our U.S. and non-U.S. jurisdictions on an ongoing basis to determine whether there is a need for a valuation allowance with respect to such deferred tax assets. As of December 25, 2021, we maintained a valuation allowance of $40.7 million, primarily related to California deferred tax assets and foreign tax credit carryovers, due to uncertainty about the future realization of these assets. We believe that future reversals of taxable temporary differences, and our forecast of continued earnings in both our U.S. and non-U.S. jurisdictions, support our decision to not record a valuation allowance on other deferred tax assets.
79
FORMFACTOR, INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
Tax Credits and Carryforwards
Tax credits and carryforwards available to us at December 25, 2021 consisted of the following (in thousands):
Amount
Latest Expiration Date
Federal research and development tax credit
$
34,838
2024-2041
Foreign tax credit carryforwards
1,029
2022-2027
California research credits
46,993
Indefinite
State net operating loss carryforwards
250,472
2022-Indefinite
Singapore net operating loss carryforwards
6,331
Indefinite
Undistributed Earnings
As of December 25, 2021, unremitted earnings of foreign subsidiaries was estimated at $45.0 million. We intend to permanently invest $10.0 million of undistributed earnings indefinitely outside of the U.S. To the extent we repatriate the remaining $35.0 million of undistributed foreign earnings to the U.S., we established a deferred tax liability of $0.1 million for foreign withholding taxes. Our estimates are provisional and subject to change because of the complexity and variety of assumptions necessary to compute the tax.
Unrecognized Tax Benefits
We recognize the benefits of tax return positions if we determine that the positions are “more-likely-than-not” to be sustained by the taxing authority. Interest and penalties accrued on unrecognized tax benefits are recorded as tax expense in the period incurred.
The following table reflects changes in the unrecognized tax benefits (in thousands):
Fiscal Year Ended
December 25, 2021
December 26, 2020
December 28, 2019
Unrecognized tax benefit, beginning balance
$
32,497
$
28,800
$
25,224
Additions based on tax positions related to the current year
3,201
3,072
3,679
Additions based on tax positions from prior years
124
702
—
Reductions for tax positions of prior years
—
—
(5)
Reductions due to lapse of the applicable statute of limitations
(77)
(77)
(98)
Unrecognized tax benefit, ending balance
$
35,745
$
32,497
$
28,800
Interest and penalties recognized as a component of provision for income taxes
$
40
$
50
$
59
Interest and penalties accrued at period end
188
204
212
Of the unrecognized tax benefits at December 25, 2021, $17.5 million would impact the effective tax rate if recognized.
The amount of income taxes we pay is subject to ongoing audits by federal, state and foreign tax authorities which might result in proposed assessments. Our estimate for the potential outcome for any uncertain tax issue is judgmental in nature. However, we believe we have adequately provided for any reasonably foreseeable outcome related to those matters. Our future results may include favorable or unfavorable adjustments to our estimated tax liabilities in the period the assessments are made or resolved or when statutes of limitation on potential assessments expire. As of December 25, 2021, changes to our uncertain tax positions in the next 12 months that are reasonably possible are not expected to have a significant impact on our financial position or results of operations.
At December 25, 2021, our tax years 2018 through 2021, 2017 through 2021 and 2016 through 2021, remain open for examination in the federal, state and foreign jurisdictions, respectively. However, to the extent allowed by law, the taxing authorities may have the right to examine prior periods where net operating losses and credits were generated and carried forward, and make adjustments up to the net operating loss and credit carryforward amounts.
80
FORMFACTOR, INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
Note 15—Employee Benefit Plans
We have an employee savings plan that qualifies as a deferred salary arrangement under Section 401(k) of the Internal Revenue Code. The plan is designed to provide employees with an accumulation of funds for retirement on a tax-deferred basis and provide for annual discretionary employer contributions. The total charge to net income under the 401(k) plan for fiscal 2021, 2020 and 2019 aggregated $2.7 million, $2.2 million and $2.1 million, respectively.
Note 16—Segments and Geographic Information
We operate in two reportable segments consisting of the Probe Cards Segment and the Systems Segment.
Our chief operating decision maker (“CODM”) is our Chief Executive Officer, who reviews operating results to make decisions about allocating resources and assessing performance for the entire company.
The following table summarizes the operating results by reportable segment (dollars in thousands):
Fiscal 2021
Probe Cards
Systems
Corporate and Other
Total
Revenues
$
633,281
$
136,393
$
—
$
769,674
Gross profit
279,873
65,834
(22,940)
322,767
Gross margin
44.2
%
48.3
%
—
%
41.9
%
Fiscal 2020
Probe Cards
Systems
Corporate and Other
Total
Revenues
$
581,739
$
111,877
$
—
$
693,616
Gross profit
263,215
51,835
(27,130)
287,920
Gross margin
45.2
%
46.3
%
—
%
41.5
%
Fiscal 2019
Probe Cards
Systems
Corporate and Other
Total
Revenues
$
491,363
$
98,101
$
—
$
589,464
Gross profit
211,382
50,927
(24,813)
237,496
Gross margin
43.0
%
51.9
%
—
%
40.3
%
Operating results provide useful information to our management for assessment of our performance and results of operations. Certain components of our operating results are utilized to determine executive compensation along with other measures.
Corporate and Other includes unallocated expenses relating to amortization of intangible assets, share-based compensation expense, acquisition-related costs, including charges related to inventory and fixed assets stepped up to fair value, and other costs, which are not used in evaluating the results of, or in allocating resources to, our reportable segments. Acquisition-related costs include transaction costs and any costs directly related to the acquisition and integration of acquired businesses.
81
FORMFACTOR, INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
The following table summarizes revenue, by geographic region, as a percentage of total revenues based upon ship-to location:
Fiscal Year Ended
December 25, 2021
December 26, 2020
December 28, 2019
Taiwan
24.2
%
21.7
%
14.7
%
China
21.2
25.2
18.0
South Korea
16.0
12.5
19.8
United States
15.9
18.4
26.3
Asia-Pacific (1)
11.5
4.8
3.7
Europe
5.7
9.5
7.0
Japan
4.7
6.3
8.9
Rest of World
0.8
1.6
1.6
Total Revenues
100.0
%
100.0
%
100.0
%
(1)Asia-Pacific includes all countries in the region except Taiwan, South Korea, China, and Japan, which are disclosed separately.
The following table summarizes revenue by market (in thousands):
Fiscal Year Ended
December 25, 2021
December 26, 2020
December 28, 2019
Foundry & Logic
$
435,812
$
446,183
$
318,552
DRAM
156,049
109,734
147,257
Flash
41,420
25,822
25,554
Systems
136,393
111,877
98,101
Total revenues
$
769,674
$
693,616
$
589,464
The following table summarizes revenue by timing of revenue recognition (in thousands):
Fiscal Year Ended
December 25, 2021
December 26, 2020
December 28, 2019
Probe Cards
Systems
Total
Probe Cards
Systems
Total
Probe Cards
Systems
Total
Products transferred at a point in time
$
630,038
$
124,788
$
754,826
$
579,569
$
104,858
$
684,427
$
488,925
$
93,837
$
582,762
Services transferred over time
3,243
11,605
14,848
2,170
7,019
9,189
2,438
4,264
6,702
Total
$
633,281
$
136,393
$
769,674
$
581,739
$
111,877
$
693,616
$
491,363
$
98,101
$
589,464
Long-lived assets, comprised of Operating lease, Right-of-use assets, Property, plant and equipment, net, Goodwill and Intangibles, net, reported based on the location of the asset was as follows (in thousands):
December 25, 2021
December 26, 2020
December 28, 2019
United States
$
372,338
$
347,654
$
287,600
Europe
47,700
51,791
52,309
Asia-Pacific
10,368
7,322
7,064
Total
$
430,406
$
406,767
$
346,973
Note 17—New Accounting Pronouncements
ASU 2019-12
In December 2019, the Financial Accounting Standard Board (“FASB”) issued Accounting Standards Update (“ASU”) 2019-12, Income Taxes (Topic 740), which simplifies the accounting for income taxes by removing certain exceptions to the general principles in Topic 740. The amendments also improve consistent application of and simplify GAAP for other areas of
82
FORMFACTOR, INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
Topic 740 by clarifying and amending existing guidance. This guidance is effective for fiscal years, and interim periods within those fiscal years, beginning after December 15, 2020. We adopted ASU 2019-12 on a prospective basis on December 27, 2020, the first day of fiscal 2021. The adoption did not have a material effect on our consolidated financial position, results of operations or cash flows.
ASU 2020-04
In March 2020, the FASB issued ASU 2020-04, Referenced Rate Reform (Topic 848) - Facilitation of the Effects of Reference Rate Reform on Financial Reporting. The ASU provides temporary optional expedients and exceptions for applying generally accepted accounting principles to contract modifications and hedging relationships, subject to meeting certain criteria, that reference the LIBOR or another reference rate expected to be discontinued. In January 2021, the FASB issued ASU 2021-01, “Reference Rate Reform (Topic 848),” which permits entities to apply optional expedients in Topic 848 to derivative instruments modified because of discounting transition resulting from reference rate reform. ASU 2020-04 became effective upon issuance and may be applied prospectively to contract modifications made on or before December 31, 2022. ASU 2021-01 became effective upon issuance and may be applied on a full retrospective basis as of any date from the beginning of an interim period that includes or is subsequent to March 12, 2020 or prospectively for contract modifications made on or before December 31, 2022. The Company has not yet applied the relief afforded by these standard amendments and is currently assessing contracts that will require modification due to reference rate reform to which these standard amendments may be applied.
ASU 2021-08
In October 2021, the FASB issued ASU 2021-08, Business Combinations (Topic 805): Accounting for Contract Assets and Contract Liabilities from Contracts with Customers. The new guidance requires contract assets and contract liabilities acquired in a business combination to be recognized and measured by the acquirer on the acquisition date in accordance with Accounting Standards Codification 606, Revenue from Contracts with Customers, as if it had originated the contracts. This approach differs from the current requirement to measure contract assets and contract liabilities acquired in a business combination at fair value. This guidance is effective for fiscal years, and interim periods within those fiscal years, beginning after December 15, 2022, with early adoption permitted. The adoption impact of the new standard will depend on the magnitude of future acquisitions. The standard will not impact acquired contract assets or liabilities from business combinations occurring prior to the adoption date.
